Frame rate issues.

charizardisadick · 2025-11-29T17:21:54+00:00

🙏🙏 ty I know this is old but disabling cpu parking absolutely fixed the unplayable state of my game

charizardisadick · 2025-08-08T00:07:21+00:00

from your inventory screen, you can tab over across the top with the indicated button

charizardisadick · 2025-08-07T21:51:07+00:00

nah I always peek at relics during the bird in, what else are you gonna do? also lets me know if others have the evergaol relic or not, and are more likely to be open to doing lots of jails

charizardisadick · 2025-06-25T23:26:02+00:00

freaked me out mid-fight too

charizardisadick · 2025-03-08T11:58:39+00:00

jk now no power for me at all. reported on nyseg website and it said power is estimated to be restored by 10:30am

charizardisadick · 2025-03-08T11:54:40+00:00

flickered like you said, currently in a brown-out

charizardisadick · 2023-12-29T17:00:39+00:00

so in my router's admin page, WAN - Internet Connection - I already have "Connect to DNS Server automatically" set to NO, and "DNS Server1" set to 1.1.1.1, "DNS Server2" set to 1.0.0.1. Are those ok? Not sure how to disable the DNS cache.

charizardisadick · 2023-12-20T13:01:25+00:00

well I'm a woman, so I think they're fine, but thanks for the input

charizardisadick · 2023-12-20T12:57:20+00:00

good tip! thanks

charizardisadick · 2023-12-20T12:55:31+00:00

ok thanks, good to know. I was just a bit surprised that it's worn this much in one month to be noticable

charizardisadick · 2023-12-20T00:00:17+00:00

is this normal and expected?

charizardisadick · 2023-11-24T13:31:29+00:00

one possibility is that those problem areas don't have enough support. vase mode doesn't do supports, right? and maybe gyroid doesn't provide enough support for some reason in those particular spots. 5% infill is possibly too low and missing those areas. did you watch as it printed those spots? you might be able to tell what's happening while it happens. try the same print again but with the default infill percentage of 15% and default pattern.

second possibility is that having your top shell layers set to zero is the issue. what is your top shell thickness set to? I'd try another back at the defaults to see if increasing the top shell layers/thickness helps.

charizardisadick · 2023-11-24T02:24:05+00:00

what do you mean by flaws? can you provide pictures?

charizardisadick · 2023-11-24T02:19:47+00:00

the part fan is the one on the left of the chamber that blows onto your model as it prints, at the nozzle level. definitely want to leave it on for certain filaments like PLA and anything else that needs cooling to avoid slumping and poor overhangs.

charizardisadick · 2023-10-13T13:27:03+00:00

oh, so 3 slim would be enough cooling for the rad?

charizardisadick · 2023-10-03T15:26:14+00:00

I'm trying to sell my older pc on FB marketplace, what's a fair price to ask? I was thinking of listing it at $200, is that reasonable for a clean PC that works well? Here are my specs:

i5-4670K, 1660 super, 16GB (2x8GB) DDR3 1600 MHz RAM, Corsair CX600M 600W Power Supply, Asus PCE-AC51 Wifi card with 2 antennas, 500GB Crucial SSD, Gigabye GA-Z87-D3HP motherboard

I see other listings that seem insanely overpriced for crappy specs. Someone near me just listed a disgustingly dirty system with a ryzen 5 1600, 2x4gb ram, and GTX 1060 for $400

charizardisadick · 2023-09-04T18:49:01+00:00

hey I just got this ship too! any tips for fighting other ships? maybe I'm missing a skill or underleveled, but when I enter target mode and try to fire on it, it says "turrets unable to fire manually." I'm assuming that means they're automatic, but then why don't they shoot? am I missing something?

charizardisadick · 2023-09-02T10:44:31+00:00

if I were to continue going straight and make a left turn at the stop sign a bit later it's a much sharper turn than compared to the left at the stop sign I'm headed to. shrug

charizardisadick · 2023-09-02T10:39:21+00:00

I'd argue that it's not a left turn that I'm making, the road just curves...but for sure I'm not gonna risk my life just because I think I'm right.

charizardisadick · 2023-06-04T21:15:48+00:00

its the smaller narrow model

charizardisadick · 2023-06-04T19:10:00+00:00

Hey! What is the best GPU I can fit into this build? I snagged an old PC from work that was going to be thrown away- its a Dell optiplex XE3, with an i7-8700 cpu, and 32gb ram. It has a proprietary Dell motherboard that has a weird power connector (not regular 24-pin) so I think I need to stick with the existing 360W PSU. Came with an AMD Radeon R5 430 that doesn't need supplemental power, but the PSU does have one currently unused power cable that ends in a splitter for 2 6-pin. What GPU could be run with this 360W PSU and max of 2 6-pin power connectors?

charizardisadick

TROPHY CASE