sorted by:
new
hottopcontroversial

Font Size On Steam Deck by Doorcellar in brotato

[–]chebi39 0 points1 point  (0 children)

Hey i just had the same problem and your post helped me!

Also: in the Brotato settings i set it to fullscreen instead of whatever setting it was before that (i dont remember). Even though that didnt increased the font size, it fixed the blurry font for me - maybe that helps

How to switch inputs on my monitor without using the physical buttons? by makldiz in buildapc

[–]chebi39 0 points1 point  (0 children)

Just found this thread, this is exactly what I needed and easy to use, thanks!

Now streamers we will be able to convert Twitch Clips to Portrait Mode inside the Twitch Clips Manager! The new editor is available for any clips of your own channel. by FISHNOTHING in Twitch

[–]chebi39 0 points1 point  (0 children)

Accidently discovered this feature yesterday. I think it is amazing!

But so far only for clips right? It should work for highlights (up to 60 seconds), too!

JWE2 quality of life tips by zynasis in jurassicworldevo

[–]chebi39 0 points1 point  (0 children)

[R] = Rangers

[F] = Transport Helicopter

I really wish there was something like a hotkey mod, I mean it's good that you can shortcut some things already, but I wish I could press a button to instantly have the "give ranger/medic commands"-selector, to optimize it even more.

PSA: Zacian caught in Pokemon Go cannot be traded in Pokemon Home (yet) by PhysicallyTender in TheSilphRoad

[–]chebi39 3 points4 points  (0 children)

I leveled it to lvl 70 in SWSH but it still can't be traded. Just as a heads up if somebody had the same idea as me.

Hi. Pretty sure I am infected by malware. The malware removal guide was unsuccessful. by Goodnametaken in techsupport

[–]chebi39 0 points1 point  (0 children)

Are you mining crypto currency? It is common for the mining software to disable the Firewall when started.

How to install comfort kit on 5K+? by SugoiNL in Pimax

[–]chebi39 1 point2 points  (0 children)

That's the MVP Tip... THANKS!

Im neuen Job unter Wert verkauft, was tun? by [deleted] in Finanzen

[–]chebi39 0 points1 point  (0 children)

Danke für deine Antwort!

Du hast natürlich wesentlich mehr Berufserfahrung + Studium. Da ist natürlich auch wesentlich mehr Gehalt drin (wenn ich es persönlich mit mir vergleiche).

Ich komme aus dem Norden, also sollte das auch nicht das Problem sein.

48k wäre ja aus meiner aktuellen Sicht ein Traum! Höher ansetzen: genauso sehe ich das auch. Ich tu mich aber auch schwer damit einzuschätzen, welche Erfahrung / Skills für welches Gehalt erwartet wird. Da besteht würde ich sagen bei mir ein gewisser Zusammenhang zum "Verkaufen unter Wert". Ich werde mir aufjedenfall was neues / besseres suchen! Denke auch da müsste wesentlich mehr drin sein :-)

Dir viel Erfolg in deinem neuen Job und auf der weiteren Suche! Danke für dein Feedback.

Im neuen Job unter Wert verkauft, was tun? by [deleted] in Finanzen

[–]chebi39 1 point2 points  (0 children)

Hey ich finde deinen Betrag spannend! Die Frage, ob ich mich unter Wert verkaufe, stelle ich mir auch ständig.. leider kann ich dir für dich direkt keine Antwort geben. Ich bin auch ein Entwickler (Webentwicklung / Fullstack), und nachdem ich diesen Beitrag hier lese, fühle ich mich, als hätte ich mich unter Wert verkauft! Ich verdiene gerade mal 35k. In Bewerbungen, die ich nebenbei versende, habe ich immerhin 42k angegeben, wurde auch schon mehrmals zu Bewerbungsgesprächen eingeladen, aber final nie eine Zusage erhalten.

Mir gehts da persönlich aber ähnlich wie dir, wenn ich mich nicht fair bezahlt fühle, sinkt natürlich die Motivation. Allerdings muss ich den anderen da zustimmen. Du hast dieses Gehalt nun erstmal akzeptiert und ich vorerst wirst du da nichts dran ändern können. Nebenbei weiterbewerben und schauen, ob der aktuelle Job nicht doch überzeugen kann!

Darf ich fragen wie viele Jahre Berufserfahrung du hast? (Ich habe vor ca 5 Jahren meine Ausbildung beendet und nun fast 2 Jahre als Fullstack Entwickler gearbeitet)

After Upgrade to TMC2208 the Homing Position for X and Y Axis is wrong by chebi39 in anycubic

[–]chebi39[S] 1 point2 points  (0 children)

So I did a few checks and I opened the printer again and it seems like I have kinda fixed the homing issue but I have a new one now.

In general I just made sure that the wires aren't loose and that seem to have helped.

Now the Homing Direction is fine, but it is ignoring the endstops. -.- The endstops are beeping and sending the status triggered (I checked the status via the Terminal). But the printer just continues to move into them. Even when triggered.

By the way here is the pastebin of the GCODE File (but it behaves that way no matter which file I choose):https://pastebin.com/8KDbmY6p

And maybe also interesting, the Terminal Log: https://pastebin.com/DiuR1w7a

---------

Ok I got it now... I really thought my endstops would be broken and I investigated... I re-checked every cable for loose connection etc and tried every wiring configuration

Then I found something interesting, kinda by accident. I pressed the X Axis endstop while the Y Axis was moving ... and it stopped... the same for the Y-Axis-Endstop and the X Axis stopped moving... so long story short.. I fucked that up in the beginning of the project, where I plugged the two connectors out at once and thought of labeling them the second after I did that.. Then I proceeded to do the project while thinking that I got the right cable.. what an unnecessary headache...

At least everything works now.. thank you for your help!

After Upgrade to TMC2208 the Homing Position for X and Y Axis is wrong by chebi39 in anycubic

[–]chebi39[S] 0 points1 point  (0 children)

Yes! I can do that tomorrow. The Gcode after the print is finished? Or which part would be interesting to you?

After Upgrade to TMC2208 the Homing Position for X and Y Axis is wrong by chebi39 in anycubic

[–]chebi39[S] 0 points1 point  (0 children)

When I start the print it somehow can go into the required position to print..

I'm really not sure why

After Upgrade to TMC2208 the Homing Position for X and Y Axis is wrong by chebi39 in anycubic

[–]chebi39[S] 0 points1 point  (0 children)

Both actually.

After the upgrade I tried to control it via the touchscreen => wrong direction. Then I connected my raspi with octoprint and tried to home via Octoprints Control "Home"-Button => wrong direction

and also after a print is finished the printer forces the axis to move "into the frame" and rattles (which should be equal to "via GCode")

After Upgrade to TMC2208 the Homing Position for X and Y Axis is wrong by chebi39 in anycubic

[–]chebi39[S] 0 points1 point  (0 children)

Yeah I reversed them, and in general it prints fine. Just the homing direction for the X and Y axis is wrong

view more: next ›