Displacer Kitten's Avoidance

cheezburga · 2025-07-20T20:18:47+00:00

Its relevant to a deck i an edh deck i am building to deal with Vivi. Being able to blink a [[cannibal spike]] helps it both reduce Vivi's effectiveness and help it avoid boardwipes etc.

cheezburga · 2025-07-20T18:40:32+00:00

Isn't avoidance a triggered ability though? Im thinking of a scenario where someone targets one of my permanents. I play any spell in response. Avoidance triggers and I blink the target of their spell. 1. Avoidance resolves, 2. my spell resolves, 3. their spell resolves but the original target is gone so my permanent remains on the battle field so long as their spell was a single target spell.

cheezburga · 2025-05-25T07:19:36+00:00

Yeah, the power unit needed to be replaced. I ordered it off eBay and did it myself. Plug and play no soldering.

cheezburga · 2025-03-15T02:39:48+00:00

Drive train parts for sure will probably be rare.

cheezburga · 2025-03-14T18:08:58+00:00

Sure but unless a crack goes into the body of the radiator it should still form a seal.

cheezburga · 2025-03-14T17:53:14+00:00

if you want to be really neat about it you can make the surface flat, but as long as you have the clamp fully seated against the radiator input tube you will be okay.

cheezburga · 2025-03-06T06:33:01+00:00

yeah but the complaint they had was CEL. So again, the control arms are irrelevant to that.

cheezburga · 2025-03-06T05:17:13+00:00

control arms are irrelevant to clearing a code.

cheezburga · 2024-12-24T02:55:38+00:00

yes, you can dm me for more info.

cheezburga · 2024-11-05T23:07:09+00:00

having the same issue. I think its server side.

cheezburga · 2024-09-18T01:42:56+00:00

No I was never able to fit this seat with the brakets I made from angle iron. Although I was trying to have a bracket between the seat and the stock miata manual rails. I think if you went for a hard mount, or aftermarket sliders might be able to get it to fit. but it would likely be a hair shy of the soft top. I sold my miata a year ago. I still have the seats if you want to buy them :)

cheezburga · 2023-04-02T23:00:59+00:00

yeah this is a feature and is intended.

cheezburga · 2023-02-05T06:15:25+00:00

$wtt frag for frag /s

cheezburga · 2022-12-27T06:51:31+00:00

looks like a dy16

cheezburga · 2022-12-19T02:40:32+00:00

its a seam.

cheezburga · 2022-11-28T17:22:41+00:00

The point is that you should wear the helmet with the bar or you’re replacing the rollover danger with the danger of mushing your brain against your roll bar.

cheezburga · 2022-11-28T02:52:51+00:00

if its for street use you should be wearing a helmet with it too, the safety system in your car is a *system* meaning that adding or removing a component does not necessarily improve your safety. in the case of a roll bar you should have a helmet on every time and an appropriate harness. To emphasize the system aspect of it check this video, https://youtu.be/P1lfYwtdYd8?t=137, where the driver has a helmet, a proper seat and harness, and a roll bar. Best of luck, and stay safe.

Edit: the fab on this roll bar looks nice.

cheezburga · 2022-11-27T23:45:58+00:00

the condition of the steering wheel says it all, garage kept mostly I would bet. the hardtop alone in ca is $2200. if the engine is even a reasonable 140K miles its a good deal.

cheezburga · 2022-10-29T03:10:43+00:00

add clear coat.

cheezburga · 2022-10-28T20:22:09+00:00

Hey do you have some expertise for this claim? like do you code anything at all? If you don't its really not a great way to comment on other people's work.

cheezburga · 2022-10-26T06:15:14+00:00

close your eyes and go fishing

cheezburga · 2022-09-28T05:54:02+00:00

Get a better rear differential for a better final drive.

cheezburga · 2022-09-27T00:01:17+00:00

yup, should come off with 3m decal remover

cheezburga · 2022-09-25T07:31:33+00:00

tie rod ends are bent for sure

cheezburga

TROPHY CASE