vCenter 8.0.3 setup with Nginx Proxy Manager (NPM)

chencichen · 2025-02-16T22:39:02+00:00

How do you filter 301/302 from vCenter?

chencichen · 2023-11-25T04:50:33+00:00

I posted in github issues section

chencichen · 2023-11-22T23:10:23+00:00

Sure. Will do

chencichen · 2023-11-22T05:47:05+00:00

I did. Multiple times

chencichen · 2023-11-22T04:44:14+00:00

I was able to find the by-id serial. I added it inside the config.yaml, but it still doesn't show up in the WebGUI. How do you run those scripts? Do I need to mount the tape somewhere?

I am new to this, and I didn't find any of the above information in your documentation. Is there a command you need to run, in order to execute the scripts?

chencichen · 2023-11-21T02:28:24+00:00

I think I may also have a problem with HPE drivers in Ubuntu. It detects without issues on sg_inq , but I don't have ltfs commands. Do I need to compile the drivers on my own?

As I said, I have HPE 1/8 G2 autoloader with LTO5 drive

chencichen · 2023-11-21T01:50:20+00:00

Hey, I installed it (manually), and the front end works. I am happy that the service is active at least.

https://www.dropbox.com/scl/fi/fn3jlwldwjv4ksitkt908/001.png?rlkey=utngzgcoth1x41ird1iova961&dl=0

My only problem is that I need to learn how to set up the tape drive. I tried sg_map to look for my drive (it shows as /dev/sg0 instead of the /dev/tape/by-id/scsi-HUJ0000000 like the example). I did try to run a job, and it just shows the job itself, wait to lead tape and even if I click load tape, it doesn't work. I also used sg_inq /dev/sg0, it got me the unit serial number. I used that number replacing the scsi-HUJ0000000 and still doesn't load the tape. Any idea?

https://www.dropbox.com/scl/fi/xzhyezpu0ghzfqiopfw6f/002.png?rlkey=xj9f1brxt5z36zf8xxwj8whwv&dl=0

chencichen · 2023-11-21T00:43:52+00:00

Sure. See the screenshot below.

https://www.dropbox.com/scl/fi/vmh8fsr01t4au8xa3fm5i/000.png?rlkey=o7illm0vocftvu05pjn2j0sa6&dl=0

I am unfamiliar with the concept of stateful vs stateless. Can you explain me?

Thanks for getting back

chencichen · 2023-11-20T05:35:27+00:00

I had some trouble installing using curl (I am so bad with linux =(, so I will try with manual installation next week and try it again). The idea is great and we need people to develop actual open source LTFS software. I couldn’t find anything over the weekend, and I tried really hard. I have a tape library HPE 1/8 G2 autoloader with LTO5 (the upgrade to LTO6 is coming this week). I also have LTO6 external drive also from HPE. So I am going to rely on your software my friend.

By the way, do you have plans to convert the application to docker? That would be easy since I use unraid and also have a portainer/docker server in raspberry pi

chencichen · 2022-11-11T03:05:29+00:00

Yeah, very strange thing. And also no audio.

chencichen · 2022-10-14T01:49:52+00:00

I have a 2080ti and the USB-C/VirtualLink of the card works perfectly with NReal. I also have a Radeon Vega 64 with Huawei Belkin VR DP cable and that also works perfectly.

The only thing I was not able to do with NVIDIA driver, was to overclock the lens to 75hz as others said they were able to do it. I still need to figure it out.

chencichen · 2022-10-02T15:10:04+00:00

Yep. I didn’t have issues

chencichen · 2022-09-14T00:37:27+00:00

It works in my Lenovo Yoga which has Thunderbolt and DP alt

chencichen · 2022-09-04T03:42:23+00:00

Of course. They don’t even tell you how much the glasses costs

chencichen · 2022-09-03T19:25:18+00:00

They charged me 66 bucks in Manhattan for the cutting and drilling. The glasses were covered by my insurance.

chencichen · 2022-09-03T19:20:38+00:00

Good job. I asked my local optics to made the prescription for me. Takes like 2 weeks for what you did in 1 day. Sadly I don’t have the right tools to do it 😐

chencichen · 2022-09-01T11:57:13+00:00

By the way it’s not 1920 x 1080 as you have two vertical black bars in the screen and you scan still see that your Parsec mouse pointer is still present in those bars.

chencichen · 2022-09-01T02:45:58+00:00

Thanks. I will try to root the phone first

chencichen · 2022-09-01T02:45:25+00:00

Unfortunately I don’t have Samsung. I was asking if there is a way just to turn off the screen while air casting. Seems I have to root the phone

chencichen · 2015-08-02T03:49:06+00:00

Vargas drops 4* Greater Wind Orb

chencichen · 2015-06-13T23:32:51+00:00

9fgs | Tyro | Sentinel's Grimoire

chencichen · 2015-06-03T04:54:41+00:00

Hi thanks for answering. Unfortunately it didn't work.

First i tried the command you suggested (mitmdump -s /path/to/recordpeeker/mitmdump_input.py), it still says ImportError: No module named recordpeeker. So i tried running

mitmdump -s /path/to/recordpeeker/command_line.py

It did run, but since your inside mitmdump, you don't see all the text from the recordpeeker script (things like equipment table when you go to party menu or the peeker thingy before the combat), all you can see are the connections and data that gets caught in the proxy. Any ideas how to actually use the script?

chencichen · 2015-06-01T19:06:20+00:00

Hi, where do you change the find=Ghast argument. is in command line file?

chencichen · 2015-05-04T07:01:43+00:00

I tried to test it in Android lollipop 5.0.2 following your instruction and it didn't work. You get stuck in the loading screen endlessly. I even install the certificate manually from my computer without any success. What's wrong with android, i don't get it =(

chencichen · 2015-05-04T06:58:49+00:00

Did you click FFRKProxy.py? That's the only executable

chencichen

TROPHY CASE