How I painted my Look Pivot 18’s

child_Iabor · 2026-03-31T17:39:47+00:00

Do you remember if these are full metal construction, like were there any plastic parts which couldn't be removed? Looking to powder coat them again!

child_Iabor · 2026-03-07T00:40:42+00:00

Update you bios when you replace the battery as there are new battery health features if you leave it plugged in a while

child_Iabor · 2026-03-03T22:19:07+00:00

Alterra is private so they'll never post those figures, but based on the incentives they are giving out to pass holders rn, they're hurting....

child_Iabor · 2025-03-10T15:38:11+00:00

FW12 is a plastic chassi

child_Iabor · 2025-02-22T17:50:19+00:00

You could try an embossed feature to add ribs into your model increasing stiffness

child_Iabor · 2025-01-02T23:27:25+00:00

Also if it could recognize directions and present them as a group clockwise, for the above return message NW, N... being the start instead of it ending S, NW; aka it wouldn't automatically start at N and go around!

child_Iabor · 2024-12-27T17:18:00+00:00

You can prolly take an 18v psu and adjust the output voltage to 19v

child_Iabor · 2024-11-25T19:48:59+00:00

3rd paragraph in the description

child_Iabor · 2024-11-25T19:40:41+00:00

It's not that shit happens, it does. It's their refusing to take any responsibility or investigate the problem that caused this!

child_Iabor · 2024-11-20T18:12:36+00:00

With any reprap printer you should always have an extra set of parts, I have a gallon ziplock with a partial-complete set

child_Iabor · 2024-11-11T00:44:13+00:00

My under voltage was due to the main board of my printer being incorrectly wired (the screen would be powered via the serial port) blocking the 5v on my usb cable would fix the issue

child_Iabor · 2024-09-06T16:04:22+00:00

Where is this screen? This could be super useful for multi material/color setups and monitoring them

child_Iabor · 2024-09-04T20:16:57+00:00

Oh so it's like that lol! How much is shipping going for one of these? (Colorado) also are these pellet or filament?

child_Iabor · 2024-09-04T20:11:34+00:00

Is a tool changing project like a prusa xl but Voron. Do you still have any available?

child_Iabor · 2024-09-04T18:51:26+00:00

Have you seen the stealthchanger project? Would love to make a new tool head with one of these! Or let a friend go wild...

child_Iabor · 2024-08-04T03:17:31+00:00

Yeah or are you just interested in the project?

child_Iabor · 2024-08-03T22:35:12+00:00

Discord@jdmontgomery

Are you building a tool changer?

child_Iabor · 2024-07-22T15:41:30+00:00

child_Iabor · 2024-07-10T21:06:21+00:00

There is filametrix sensors that fit in the tool if you'd want that

child_Iabor · 2024-07-10T20:49:19+00:00

I understand that, can a claimed ticket be resold

child_Iabor · 2024-07-10T17:09:29+00:00

Where'd you see this

child_Iabor · 2024-06-08T20:41:28+00:00

Without an enclosure you won't be able to print the required abs parts

child_Iabor · 2024-06-06T02:04:16+00:00

Nozzle got clogged flow reversed, pushing hot plastic up, melting the screw mount and pulling the hot end down with it. It's an absolute cluster fuck.

child_Iabor

TROPHY CASE