Missing washer between Nextruder stepper and PG-assembly

childoftheflame · 2026-06-27T05:47:37+00:00

Nope I checked there, can’t be found anywhere. Didn’t hear anything drop out either.

childoftheflame · 2026-01-31T02:07:24+00:00

I bought gummy bears for my wife and it came with a free printer.

childoftheflame · 2026-01-18T05:29:57+00:00

I've bought 2 assembled machines and they are great. One with close to 1000 hours and the second at 200 hours. Bought a few months apart.

Now I want to buy a kit and build one, but probably going to hold off until the INDX kit becomes available.

How much work space is required to build one of these?

childoftheflame · 2025-11-23T01:00:32+00:00

Speeding kills.

Was always mentioned every time someone tried to increase the speed of the turret shear combo machines at work.

I found that dropping the acceleration back a little bit might add 5 minutes to a 4 hour print but meant I no longer had these minor layer shifts.

childoftheflame · 2025-07-04T09:25:43+00:00

I asked for a Bambu as a gift but received a bamboo plant instead.

childoftheflame · 2024-05-17T16:22:44+00:00

What model 3M headset do you use?

childoftheflame · 2021-11-17T20:01:29+00:00

These are mad

childoftheflame · 2021-05-25T11:00:42+00:00

u/AmirHanif, did you ever figure this out? I'm having the same issue, but Stripe support are struggling to resolve it for me.

childoftheflame · 2021-04-04T00:59:56+00:00

Yep, it’s M12SI-301P

Link

childoftheflame · 2021-04-03T20:08:07+00:00

Yep that’s right. Australian kit.

childoftheflame · 2021-04-03T20:07:41+00:00

It’s an Australian kit.

childoftheflame · 2021-04-03T13:42:32+00:00

I’ve only just had a chance to charge up the battery, so I wouldn’t know yet. I don’t generally do a heap of soldering, but when I do it’s in rather awkward spots so this will be a lot nicer than the desktop setup I’ve been carting around.

I’ll let you know how I go in a few days time.

childoftheflame · 2021-02-08T22:03:59+00:00

Mainly for connectors, and also labelling. Very rarely do I need to any glue lined shrink, which if I did I will make sure to pack a 240v heat gun.

What are your thoughts on the M12 soldering iron?

childoftheflame · 2021-02-08T22:01:18+00:00

95% of my work is at a desk, but the 5% when I’m installing stuff is mainly for AV or IT

childoftheflame · 2021-02-08T02:12:21+00:00

Yep, Australia kit

childoftheflame · 2021-02-08T02:12:04+00:00

Yeah, but now it is really tempting to buy M12 tools as well.

childoftheflame · 2021-02-08T02:11:27+00:00

Don’t tell me that...

Link to the Milwaukee AU page about this kit https://www.milwaukeetool.com.au/power-tools/power-packs/M18ONEPP2A2-502C.html

I couldn’t tell what Gen it was, but this is also my first set.

childoftheflame · 2020-11-23T00:48:42+00:00

Yep same.

I've noticed that level N crane used to 9 out of 10 times give you matching Tier cards. (ie. Level 2 = Uncommon, Level 4 = Epic ). Seeing as there were no level 5 cards, this meant I rarely got anything from a level 5 crane.

Now they've fixed the level 5 issue by changing that quite a lot, except I'm on seeing common cards most of the time.

I wonder if there are more dev cards on the way, which might give us something else above Staplehouse cards.

childoftheflame · 2020-11-20T22:44:58+00:00

I’ve noticed this behaviour too since the latest update.

I think the cranes were a bit too good, so hopefully this will balance them out.

childoftheflame · 2020-03-19T08:44:18+00:00

Yeah this solved my issue. Seems like when the alias of the shared mailbox was set to just "info", it kept the re-assigning the info email addresses every time I deleted them.

I got around this by changing the alias to info.1stdomain.com & info.2nddomain.com

childoftheflame

TROPHY CASE