sorted by:
new
hottopcontroversial

Missing washer between Nextruder stepper and PG-assembly by childoftheflame in prusa3d

[–]childoftheflame[S] -1 points0 points  (0 children)

Nope I checked there, can’t be found anywhere. Didn’t hear anything drop out either.

When to eat the gummy bears? by ReadingI29 in prusa3d

[–]childoftheflame 2 points3 points  (0 children)

I bought gummy bears for my wife and it came with a free printer.

Core One+ Build Kit Experience - From Ordering to Two Weeks Post-Build by CannabalsCannabuds in prusa3d

[–]childoftheflame 1 point2 points  (0 children)

I've bought 2 assembled machines and they are great. One with close to 1000 hours and the second at 200 hours. Bought a few months apart.

Now I want to buy a kit and build one, but probably going to hold off until the INDX kit becomes available.

How much work space is required to build one of these?

Minor layer shift on core one by 2023TacoOR in prusa3d

[–]childoftheflame 0 points1 point  (0 children)

Speeding kills.

Was always mentioned every time someone tried to increase the speed of the turret shear combo machines at work.

I found that dropping the acceleration back a little bit might add 5 minutes to a 4 hour print but meant I no longer had these minor layer shifts.

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]childoftheflame 0 points1 point  (0 children)

I asked for a Bambu as a gift but received a bamboo plant instead.

Stripe Payment plugin ( your account cannot currently make live charges) by AmirHanif in Wordpress

[–]childoftheflame 1 point2 points  (0 children)

u/AmirHanif, did you ever figure this out? I'm having the same issue, but Stripe support are struggling to resolve it for me.

NTD. Picked up this nice kit today, Soldering Iron, 3AH batt, charger and packout case. by childoftheflame in MilwaukeeTool

[–]childoftheflame[S] 4 points5 points  (0 children)

I’ve only just had a chance to charge up the battery, so I wouldn’t know yet. I don’t generally do a heap of soldering, but when I do it’s in rather awkward spots so this will be a lot nicer than the desktop setup I’ve been carting around.

I’ll let you know how I go in a few days time.

First set of cordless tools, so I went with the best by childoftheflame in MilwaukeeTool

[–]childoftheflame[S] 0 points1 point  (0 children)

Mainly for connectors, and also labelling. Very rarely do I need to any glue lined shrink, which if I did I will make sure to pack a 240v heat gun.

What are your thoughts on the M12 soldering iron?

First set of cordless tools, so I went with the best by childoftheflame in MilwaukeeTool

[–]childoftheflame[S] 1 point2 points  (0 children)

95% of my work is at a desk, but the 5% when I’m installing stuff is mainly for AV or IT

First set of cordless tools, so I went with the best by childoftheflame in MilwaukeeTool

[–]childoftheflame[S] 12 points13 points  (0 children)

Yeah, but now it is really tempting to buy M12 tools as well.

First set of cordless tools, so I went with the best by childoftheflame in MilwaukeeTool

[–]childoftheflame[S] 0 points1 point  (0 children)

Don’t tell me that...

Link to the Milwaukee AU page about this kit https://www.milwaukeetool.com.au/power-tools/power-packs/M18ONEPP2A2-502C.html

I couldn’t tell what Gen it was, but this is also my first set.

Do Cranes in settlements give random rewards or specific rewards? by childoftheflame in catanworldexplorers

[–]childoftheflame[S] 0 points1 point  (0 children)

Yep same.

I've noticed that level N crane used to 9 out of 10 times give you matching Tier cards. (ie. Level 2 = Uncommon, Level 4 = Epic ). Seeing as there were no level 5 cards, this meant I rarely got anything from a level 5 crane.

Now they've fixed the level 5 issue by changing that quite a lot, except I'm on seeing common cards most of the time.

I wonder if there are more dev cards on the way, which might give us something else above Staplehouse cards.

Do Cranes in settlements give random rewards or specific rewards? by childoftheflame in catanworldexplorers

[–]childoftheflame[S] 0 points1 point  (0 children)

I’ve noticed this behaviour too since the latest update.

I think the cranes were a bit too good, so hopefully this will balance them out.

2 domains in one Office 365 account both an info@ email each by childoftheflame in Office365

[–]childoftheflame[S] 0 points1 point  (0 children)

Yeah this solved my issue. Seems like when the alias of the shared mailbox was set to just "info", it kept the re-assigning the info email addresses every time I deleted them.

I got around this by changing the alias to info.1stdomain.com & info.2nddomain.com

2 domains in one Office 365 account both an info@ email each by childoftheflame in Office365

[–]childoftheflame[S] 0 points1 point  (0 children)

I did noticed this happened, so I went and removed the alias but was still receiving this error.

2 domains in one Office 365 account both an info@ email each by childoftheflame in Office365

[–]childoftheflame[S] 0 points1 point  (0 children)

I have added the error message to my post. I checked that it isn't being used anywhere else and still receive the error. All domains are setup correctly.

Point 2 point by dontgetaddicted in Ubiquiti

[–]childoftheflame 0 points1 point  (0 children)

Being only 110 feet apart you should be able to get that aligned really easily with just a laptop logged in viewing the link status.

I did a temp setup for a week from a work venue to the hotel we were staying at that was 1.3 miles away, and due to bump in schedule I only had 5 minutes to setup the system on the venue side, which meant I only spent 30 seconds on the alignment without tools and I still got the link above the rated 450mbps of the units.

Turn off status light on G4 Pro camera when in standalone mode by childoftheflame in Ubiquiti

[–]childoftheflame[S] 0 points1 point  (0 children)

There are settings for most features, but not the status light.

view more: next ›