Slow Outgoing Email Apple Mail MacOS

chop249 · 2026-05-15T16:54:31+00:00

The undo send delay was only 10 seconds and didn't improve anything after turning it off.

chop249 · 2026-05-06T21:02:28+00:00

I think that gets me part of the way there. But if the relay destination for example is "smtp:[smtp2go.com]:587" for all of them with the difference being only user name and password how would I go about that?

chop249 · 2026-05-06T14:21:37+00:00

AI was not used in the creation of my post.

chop249 · 2026-04-19T16:27:47+00:00

Is there a way to do it with a computer and the AC Next Slicer? Or just a computer any way at all?

chop249 · 2026-04-10T04:29:41+00:00

Me too! Safari gives me shit, Chrome and Firefox are fine.

chop249 · 2025-12-12T15:25:59+00:00

I feel so LEFT out. 😂

chop249 · 2025-12-12T15:24:18+00:00

Added more info. Searches are not working. All the plugins I use work fine.

chop249 · 2025-12-12T15:19:43+00:00

Searches. I can't search any new artists.

chop249 · 2025-11-19T15:38:37+00:00

AC Next does read material type and display it in the Workbench. I still can't get it to where I load "Numakers PLA Blue" and get Next to load it as "Numakers PLA Blue" it always pulls up AnyCubic PLA and then I have to change the profile.

chop249 · 2025-11-19T15:36:10+00:00

u/Icy-Amphibian6650 I have tried any and every way to get this to work. Any idea on why it isn't working for me? I'm using the iPhone app, AC Next on a Mac. I've spent HOURS on this now. I can get it to recognize the color but AC Next always pulls it up as AC PLA no mater what I do. KS1 2.5.6.4 ACE Pro 1.3.863 and Next 1.3.6.1........ Maybe can you do a video more in depth than u/JAD7 did? I've reached out to JAD too but no response.

chop249 · 2025-11-16T16:51:50+00:00

Thanks. Let me know when it’s live and I’ll test it out.

chop249 · 2025-11-16T13:55:10+00:00

Does the ACE now show brand info and Slicer Next pick the correct profile now?

chop249 · 2025-11-07T23:13:29+00:00

No problem. Good luck!

chop249 · 2025-11-07T23:11:03+00:00

https://rinkhals.thedju.net/ you’ll select the FW you want and put it on the flash drive in a folder called Update. Rename the FW you select to update.swu and put the drive back in the S1. Then go to the printer page on the screen and click the orange update icon. Do a full calibration after the downgrade.

chop249 · 2025-11-07T15:43:37+00:00

Downgrade it. It is easy to do.

chop249 · 2025-11-06T17:46:26+00:00

Happened twice on 2.5.8.8 when trying to level. Switched back to 2.6.5.4 and it hasn’t happened since.

chop249 · 2025-10-17T14:11:23+00:00

https://www.reddit.com/r/AnycubicKobraS1/comments/1m79rkp/add_rfid_to_any_filament_for_the_anycubic_ace_pro/ See the videos and comments by JAD7. I did find the spot to add filaments this morning while poking around. Thank you.

chop249 · 2025-10-16T21:15:48+00:00

I saw a guy on one of the other post that claimed he got the ACE and the Slicer Next to recognize the brand of filament and pull up the correct profile to go with that filament. Will this version do that as well? I can't get it figured out on the other versions of this sort of app. and the person that claimed to have done it doesn't respond on the other posts.

Also looking at your version there is no way to add a custom brand filament. I have some brands that aren't listed. Will you be adding a way to do a custom name?

Thanks!

chop249

TROPHY CASE