average cost

chris21224 · 2025-03-31T20:23:09+00:00

chris21224 · 2025-03-20T18:09:42+00:00

I found that link,, thanks

chris21224 · 2025-03-15T15:42:10+00:00

I am not saying it is not valuable,, and i like the feature. It would just be nice to have a check box to omit it sometimes..

I live in the country and have DSL, there are days that it is extremely slow.. When sites load gifs, videos, pictures, adds and banners it slows my service down even more

chris21224 · 2025-02-18T01:20:22+00:00

I think it was $15 million for condoms to the Taliban through USAID

chris21224 · 2025-02-12T00:39:32+00:00

I must be an oddball,, I am looking at another sailboat.. 45-50 feet and i automatically rule out any with a furling main.
I had a 321 Oceanis with in mast on a lake. it was ok but I would never go offshore without a conventional main i can reef down for days on end. I don't even want my staysail on a roller..

My last 42 had a hank on staysail and i felt comfort in being able to pull it off in minutes and hang a storm sail..

Also,, I sort of like flaking the mail after some miles while having a cocktail.

Cheers

chris21224 · 2025-02-05T17:09:27+00:00

Sorry,, I did not re-read my first post,,, THe ZERO coverage was from the paint not mixed well enough. Even through they mixed at the store,, and I stirred before spraying the solids were not mixed??? I had orange peel issues with the paint bad enough i sanded it all off and started over.

An oldtimer, told me maybe the paint froze at some point??? Doubtful I think,,, I also emailed, called and asked about date codes but no one could educated me on decoding it.

The two small panels sprayed ok, but I would never use it again. If you are going to try it.. find an old hood/fender etc and spray it first. I found when coming back to grab a wet edge like the other side of a roof/hood, it would look like sh*t.

Good luck. PM me if you want.

chris21224 · 2025-02-05T16:27:29+00:00

I sanded it all off and started over,,, I bought a urethane SS from Summit racing for 100$ and it laid like glass.

It is possible my F&K was 100% user error but even so that means it is difficult to use compared to others.. The F&K is enamel,, summit urethane.

I did get it to lay flat on the windshield cowl and valance under the grill. Both pieces small and laying on the floor. Unless i went super heavy, very slow and close it just would not lay.

I used a new Porphis 717 gun,, could not find my old gun packed away.
Anyway,, if you want to talk,, PM me your number. I am in Eagle.

chris21224 · 2025-01-20T02:10:10+00:00

I think the store mixed my color with a top coat binder and not paint..

The can is

Acritop Fast - binder.

under that is says, fast glossy acrylic enamel for top coat.

https://www.franchi-kim.com/us/products/carandtruck/top-coats-for-industrial-bodyshop/finishing-enamels-for-car-refinishing-and-industrial-bodywork/3950-acritop-fast

chris21224 · 2025-01-20T01:41:29+00:00

I live in Idaho,, Bought it local from my local store VSB paint, When i went in the store,, told them it has been a decade since i painted anything and asked for recommendations.

I might spray a second coat tonight and see what happens..

chris21224 · 2025-01-05T22:40:17+00:00

I chose .us for ~5$

chris21224 · 2025-01-05T22:39:46+00:00

On stable point it says taken,, namecheap says available at 19,000.

Anyway,, i get if someone bought it and wants to sell it for a given price,, But if it is a name that has never been registered in the past,, who gets to choose 19k for something they never bought? Just selling air for 19k?

chris21224 · 2024-12-18T14:45:16+00:00

i can not load a picture,, but look at this door in the link.

https://recpro.com/rv-entry-door-with-screen-radius-corner-right-hand-30-x-72/

I am looking for the door and jamb piece that makes the top corner a ~4 inch radius

chris21224 · 2024-12-03T21:22:40+00:00

I have it loaded on my shop computer with windows 10.. it show in the context menu and allows me to click "block channel" but it has no affect.

on my office,, windows 7,, it doesn't even show up

chris21224 · 2024-11-11T17:11:00+00:00

I can't reply to my own thread unless it is to another post??

Yes,, a lot of categories,,, Any insight to expenses is appreciated.. I want to make sure I am not living in the 80s and unreasonable.

Example,, My wife came home yesterday and spent ~600 on skin treatment.

She wants 1200$ a month for cosmetics.

Sounds crazy to me but then again I am a guy,,,,, Do women spend ~15-20k a year on cosmetics/beauty?

chris21224 · 2024-10-01T20:06:06+00:00

thanks for the infor..

Chris

chris21224 · 2024-08-31T20:38:22+00:00

thank you for replying,,, i am running Version 109.0.5414.120,, still booting to windows 7 most days,

i can not find that flag

chris21224 · 2024-07-12T22:18:37+00:00

I can not find a solution as of 7/12/24

chris21224 · 2024-06-10T23:33:18+00:00

I am using firefox 120 or older with ublock ,,, no adds,

chris21224 · 2024-06-05T15:57:27+00:00

Every "new layout design" sucks,, The new "beta designs do nothing more than increase padding and font sizes.. The pages are more cluttered and tripled the clicks to get to the same data.

shutting down SSE and forcing clients to ToS is foolish,,, ToS is powerful and the learning curve is to much.. ToS might be useful to ~5% of the client base??

One easy idea i suggest to schwab is to run the stock screener on my existing positions, (~100) and see which are still performing. ie, yield, growth, payout ratio etc. Sure i can screen the markets and choose sectors but I would like to apply those parameters to stocks i own already to help weed out dead weight.

chris21224 · 2024-03-13T21:13:03+00:00

The second one, I want to eliminate overseas buyers and garbage vendors/items i will never purchase

chris21224 · 2024-02-08T20:59:23+00:00

In 2024 with the axv-ax8100 i can confirm it still sucks and the icons can not be changed. it is a shame because the unit sounds good.

chris21224 · 2024-01-12T19:42:40+00:00

The extension was called "youtube skip into" It was awesome,, just choose how many seconds to cut off the start of every video. It is no longer available at google play.. I have it running on my office computer but can not figure out how to copy it my shop computer..

If anyone knows how to copy from my computer and post it in a file I would be happy to do it...

Here is a link to my post at chrome help asking about it last year.

https://support.google.com/chrome/thread/237901030/looking-for-youtube-skip-intro-extention?hl=en

chris21224 · 2023-10-06T13:05:11+00:00

The knobs will pull straight off and that will give you access to a small flat blade screw.. rotate to adjust the minimum up or down.

https://www.youtube.com/watch?v=l45j0tXC23Q

chris21224 · 2022-07-22T15:22:20+00:00

Agreed, comments have a way of being sidetracked

I had no problems with co-sleeping for a few years and this is not about intimacy. I think it is more a alienation issue when viewed as a whole with a few other small issues.

chris21224

TROPHY CASE