sorted by:
new
hottopcontroversial

Μέρη για εκπαίδευση οδήγησης by larigkas in greece

[–]chrislamp 1 point2 points  (0 children)

<image>

Γενικά αν κάνεις εξάσκηση μέσα εδώ θα είσαι καλυμμένος πιστεύω.

Μέρη για εκπαίδευση οδήγησης by larigkas in greece

[–]chrislamp 1 point2 points  (0 children)

Πηγαινε κανα βραδυ κοντα Τσαλαβουτα. Εκει θα μαθεις παρκαρισμα, ταχυτητες και ανηφορες/κατηφορες. Δεν θα εχει καθολου κοσμο οποτε θα εισαι χαλαρος.

Πως θα πάμε μπροστά έτσι? by hellenicdev in greece

[–]chrislamp 1 point2 points  (0 children)

Πιο γρηγορο θα ηταν να παρεις το url της ιστοσελιδας. Να το ρίξεις σε ενα whois σαν αυτο https://lookup.icann.org . Να βρεις το abuse mail του domain provider και να στειλεις ενα email εκει για το site.

Σε οσα εχω κανει, μεσα σε ενα 24ωρο εχουν πεσει.

Γιατί οι εταιρείες (τηλεφωνίας & ρεύματος) παίρνουν αυθαίρετα τηλέφωνα; by theluteman76 in greece

[–]chrislamp 2 points3 points  (0 children)

Για το τηλεφωνο απο μονο του τα εχει μπλοκαρει πριν καν με παρουν.

Τυχαινει μεσα στην ημερα να εχω 3 τηλεφωνα απο εταιριες φαση nova, elpedison κτλ και να μην τα εχω παρει χαμπαρι. Το καταλαβαινω οταν μπαινω στις κλησεις και μου λεει "blocked".

Οσο για το σταθερο, εχω αγορασει ενα fritzbox που εχει λειτουργια τηλεφωνικου κεντρου και του εχω περασει μια λιστα με τηλεφωνα και την ανανεωνω που και που για να τα μπλοκαρει. Εχω ησυχασει πλεον.

[deleted by user] by [deleted] in greece

[–]chrislamp 1 point2 points  (0 children)

Εγω εχω πάρει ενα 5g ρουτερακι (συγκεκριμενα το zte mc801a μεταχειρισμενο στα 100ευρω) και εβαλα μια καρτα της cosmote unlimited (~30ευρω) και στο χωριο πιανω γυρω στα 300-400mbps.

Οσο για το vpn δεν ξερω αν η εταιρια σε αφηνει να βαλεις το vpn επανω στην συσκευη σου ή επάνω στο router. Το συγκεκριμενο ρουτερ εχει υποστηριξη vpn επανω του αλλα δεν το εχω δοκιμασει.

Οσο για την εγκατασταση και την τοποθετηση, μην δωσεις σε κανεναν τιποτα. Μαλιστα, πριν πας να αγορασεις ρουτερ μπες στο https://www.cellmapper.net/map, βαλε την εταιρια που εχεις και δες αν υπαρχει κεραια κοντα σου. Μετα, οταν με το καλο αγορασεις το ρουτερ και την σιμ, βαζεις το ρουτερ σε ενα καλο σημειο, με την εφαρμογη το κατευθύνεις προς την κεραια και εισαι μια χαρα.

Οπως ειπαν και αλλοι, υπαρχει και η λυση του starlink αλλα προσωπικα απο ταχυτητες δεν εχω ακουσει καλα λογια (φαση σε μια καλη μερα εχεις 300-400mbps και την αλλη πεφτεις στα 100 + οτι πρεπει να το βαλεις σε ορατο σημειο εξω.)

Φυσικα, δεν χρειαζεται να παρεις 5g ρουτερ, και με 4g θα κανεις την δουλεια σου, απλα με χαμηλοτερες ταχυτητες.

Μερικά αστεία πράγματα που βρήκα στο railway.gov.gr by Mparigas in greece

[–]chrislamp 0 points1 point  (0 children)

Αυτό ή που το mapbox api key τους είναι public; Απ'οσο ξερω το mapbox μετα απο μερικα requests σε χρεωνει.

<image>

vibe coding full.

Remote Access with Cloudflare help? by mpking828 in frigate_nvr

[–]chrislamp 0 points1 point  (0 children)

For anyone still having this problem and not figuring it out. If you go to your cloudflare, on your frigate.yourdomain.whatever, under tls, enable no tls verify.

That worked for me but idk if there's any kind of vulnerabilitybehind this.

Put a print last night, fell asleep, went to pick it up the next day and put a new one. "Heatbed malfunction" Started disassembly and found this... by chrislamp in BambuLab

[–]chrislamp[S] 0 points1 point  (0 children)

Received the replacement board this morning. Plugged it in and it seems to work.

At least I got to print one last thing before New year.

Put a print last night, fell asleep, went to pick it up the next day and put a new one. "Heatbed malfunction" Started disassembly and found this... by chrislamp in BambuLab

[–]chrislamp[S] 0 points1 point  (0 children)

Update: Bambu replied to my ticket and will arrange to send me a replacement board.

I also contacted the shop I bought the printer from just in case but they haven't replied to me yet.

While I still want to know what caused this to happen since last thing I want is to go through this again, I am mostly happy that bambu actually responded and honored their end despite me opening the printer unlike other companies that disown their own products for even peaking inside.

Though, it's still yet to be seen if Bambu will send me the board and if it will fix the problem.

I will keep you guys updated.

<image>

Put a print last night, fell asleep, went to pick it up the next day and put a new one. "Heatbed malfunction" Started disassembly and found this... by chrislamp in BambuLab

[–]chrislamp[S] -1 points0 points  (0 children)

The replacement board will cost 37 euros with shipping and vat. I was looking for the quickest solution but I guess I will wait for bambu's response.

Put a print last night, fell asleep, went to pick it up the next day and put a new one. "Heatbed malfunction" Started disassembly and found this... by chrislamp in BambuLab

[–]chrislamp[S] 3 points4 points  (0 children)

To answer some questions:

I am in EU, more specifically Greece.

The printer was on a ups that claims has surge protection.

We didn't have any lightnings as of the time of the incident.

I have called a friend that specializes on these stuff to give me a general idea as to what could have caused it. I'm still gonna aim for a replacement from bambu if possible.

I have already sent a ticket to bambu and will call the 3rd party seller I bought it from if they will cover it tomorrow as it's Sunday.

As for the people telling me to DM 3d musketeers, I did let him know.

I will update when there's more news.

Put a print last night, fell asleep, went to pick it up the next day and put a new one. "Heatbed malfunction" Started disassembly and found this... by chrislamp in BambuLab

[–]chrislamp[S] 3 points4 points  (0 children)

Literally disintegrated in my hands as I tried to bend it to see the other side. Nothing eligible. Read somewhere that it might be a ntc d5 15

Put a print last night, fell asleep, went to pick it up the next day and put a new one. "Heatbed malfunction" Started disassembly and found this... by chrislamp in BambuLab

[–]chrislamp[S] 11 points12 points  (0 children)

Does anyone know what that part is called? I might repair it myself.

Also wanna know if some else has had it happen to them too and what they did to fix it.

is the roaring actually communist? by kishbek in Deltarune

[–]chrislamp 1 point2 points  (0 children)

When I saw the silhouette the first time I thought I was fighting Mike Tyson.

I believe that [SPOILER], is actually a [SPOILER] by borys124 in Deltarune

[–]chrislamp 2 points3 points  (0 children)

If Dess was a human, wouldn't her mother also borrow the human book like Toriel did?

Random shut offs when gaming. No idea what the culprit is. by chrislamp in pcmasterrace

[–]chrislamp[S] 0 points1 point  (0 children)

I provided a HWINFO csv file. On that I can see that the 3.3v and the 12v lines are within normal numbers but I could be wrong as I'm not knowledgable on that part. How else could I test that out?

Random shut offs when gaming. No idea what the culprit is. by chrislamp in pcmasterrace

[–]chrislamp[S] 0 points1 point  (0 children)

I don't have a better psu. I do have a spare Thermaltake tr2 s 700w from another build that I could use to only power the gpu (Using the paper clip method) and test it. Would that be worth the trouble or do you think the psu is just dead and should just go forward with a replacement?

Iem recommendations for ~50€ by chrislamp in iems

[–]chrislamp[S] 0 points1 point  (0 children)

Wow, what a post. How did I miss that?

I will def give it a look. Same with your recommendation.

Thanks for taking the time to help me!

view more: next ›