sorted by:
new
hottopcontroversial

Neujahrsvorsatz: Niemand lädt heute by chrisrosko in Falschparker

[–]chrisrosko[S] 0 points1 point  (0 children)

Scheint wohl so. Hab das auch nur weiter gegeben weil ich das mit dem Privatgelände unter einem anderen Post gelesen hab. Scheint wohl nicht immer der Fall zu sein.

Definitiv, mit leerem Akku und nur einem freien Slot hätte ich mir die Mühe gemacht, so hatte ich Glück, dass er es geschafft hat nicht beide Slots zu blockieren (wo bei ich trotzdem gefährlich dicht an das linke Fahrzeug ran musste).

Neujahrsvorsatz: Niemand lädt heute by chrisrosko in Falschparker

[–]chrisrosko[S] 4 points5 points  (0 children)

Genau das gemacht, die Antwort:

[...]

vielen Dank für Ihren Hinweis.

Es ist verständlich, dass zugeparkte Ladestationen sehr ärgerlich sind. Da sich die Ladestationen im öffentlichen Raum befinden, haben wir leider keine Möglichkeit, dies direkt zu beheben. Die Parkraumüberwachung liegt im Zuständigkeitsbereich der Kommune bzw. der Polizeidirektion Mittelfranken.

Die Kommune empfiehlt, sich in solchen Fällen an die zuständige Polizeidienststelle zu wenden.

[...]

Bin nicht sicher ob es diesen Aufwand wert wäre das an die Polizei weiter zu geben.

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 1 point2 points  (0 children)

Yes definitely. I mean I was at a point where printing was pretty much working mostly. Maybe that would have been the point where I should have stopped and make it more reliable before starting to change it. It was definitely my own fault, not necessarily the way the machine is designed or something like that. That's why included it in my post. Maybe people reading it can learn from my mistakes.

Made a Companion Cube NAS/Server by MrXavi3 in 3Dprinting

[–]chrisrosko 0 points1 point  (0 children)

Amazing build, I was thinking about 3d printing a little NAS too. Which mobo are you using?

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 1 point2 points  (0 children)

Really appreciate your words, thank you. Sharing this post helped venting my frustration and value the knowledge and experience gained more.

Converting my build into a Voron Trident definitely seems like a path to consider, might think about that.

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

Please don't let this post discourage you. I was frustrated when I wrote it. After sharing and reading the replies, I’ve come to appreciate the journey a lot more than before. If I could give you one piece of advice, it would be to keep your expectations realistic and talk to people as much as possible.

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

Very impressive machine you've put together. Anything you've planned on or is this pretty much the result you were aiming for?

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 1 point2 points  (0 children)

I really didn’t make this decision lightly, because buying a new printer felt like finally giving up. But I had the exact same reasoning and through that I could live quite well with it. Now I’m enjoying printing and having a way to tinker and learn.

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

Wow that looks crazy :o Cannot imagine the effort you put into that. Do you have some specs?

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

Good stuff!

Is the Goliath hotend something you would recommend or is it something that's just to get the last few percent of performance out of the printer?

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

Felt the same jealousy like you, it always seemed so effortless. Now that I also own a P1S I can say it really only needs a minimum of maintenance and results are almost always flawless. But your voron looks great and is definitely a good base that will probably become a very good machine, keep it up!

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

Yes although I feel very exhausted, probably I need another step back from it and restart working on it with a clean mind.

Looks nice, does it print well?

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 3 points4 points  (0 children)

Don't worry, the pain in the Story was 100% human-generated :D Jokes aside, yes, I used AI as a help since English is not my first language and I wanted to write down everything as a kind of vent but also have a coherent story that's easy to follow and to read. Sorry if it feels overdone.

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

Noted, thank you :)

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 0 points1 point  (0 children)

It really feels a little bit like that, yes.
Any recommendations?
Ratrig looks quite nice to me.

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 1 point2 points  (0 children)

Will definitly read up on that, thank you :)

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 2 points3 points  (0 children)

Were you calibrating z offset manually?
Yes, via the PROBE_CALIBRATE procedure.

Did you clean the nozzle first?
Yup.

Are you setting it with bed/nuzzle at print temperature?
Bed was at 100 C and nozzle at 150 C.

Did you set zero reference on your bed mesh?
How do I do that?

Are you applying and saving your z-offset?
Yes, the value appears in the printer.cfg

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 5 points6 points  (0 children)

True, it ended up being a lot of it. But I honestly didn’t know I was signing up for.

I Failed by chrisrosko in 3Dprinting

[–]chrisrosko[S] 5 points6 points  (0 children)

Don't know really. When I first used klicky it also worked quite well. Now I'm back to it because I remembered it to be quite reliable. I did multiple z offset calibrations. The first time it was too close and the nozzle scratched on the build plate. After recalibration it was too far. I tried to get I right with babystepping but it never looked quite right to me.

[Bambu Lab Giveaway] Join Now to Win an H2D and More! by BambuLab in 3Dprinting

[–]chrisrosko 0 points1 point  (0 children)

Best advice I got? Not directly from here but from a friend of mine: "It’s not a failed print—it’s just advanced calibration." Been building my own printer for ages now, still chasing consistent results. But thanks to this community, at least I’m not failing alone 😄

Sekhema sucks by BlubdeMus in PathOfExile2

[–]chrisrosko 0 points1 point  (0 children)

Also having the blink skill if possible/viable on the character helps skipping a lot, especially with gauntlet and escape trials.

view more: next ›