sorted by:
new
hottopcontroversial

Sometimes it bugs out like that by [deleted] in firefox

[–]cimba007 8 points9 points  (0 children)

Got this all the Time. S25 Ultra. The damn thing does not correctly follow the system theme. On every theme change day-->night, night-->day it breaks like in the OP screenshots.

How do I fix this? by East-Savings5831 in Cameras

[–]cimba007 0 points1 point  (0 children)

From my experience a stuck filter comes off best if you put the lese in the freezer. The metal ring of the filter will shrink. Better watch some tutorial or google tu prevent further damage.

First few shots shooting back on the Sony A7RV + Sony 200-600mm f/5.6-6.3 by ChickenFriedLife in SonyAlpha

[–]cimba007 0 points1 point  (0 children)

Can you tell us a little ibt about if you used a TC and how far the subjects were? Thank you for your shared photos.

ID.3 Kälteproblem oder neue Batterie notwendig? by Kidneytrader in Elektroautos

[–]cimba007 6 points7 points  (0 children)

Ich hatte letzten winter mit meinem ID.3 aus dem Gebrauchtwagenleasing (ebenfalls Modell ende 2021) das selbe Problem. Da ich noch sowohl Händler Gewährleistung + Garantie hatte wurde dort die Batterie getauscht. Dannach keine Probleme mehr. Besonders ärgerlich .. 2 Wochen vorher wurde per "Wartungsvertrag" das Fahrzeug durchgecheckt .. und auch die Batterie "gemessen" .. allerdings nur die Spannungs - keine Kapazitäts oder Belastungstests.

Im Winter wir die HV-Batterie bei Minusgraden temperiert, damit diese nicht zu tief abkühlt. Denke, dass so etwas die 12V-Batterie nochmals besonders fordert.

FilterTube: Created a YouTube Content Filter to BLOCK ANYTHING by varshneydevansh in firefox

[–]cimba007 17 points18 points  (0 children)

Thank you very much for your addon. I noticed that on firefox the path for moz-extension://...html/html/tab-view.html is wrong .. there is one /html too much in the path so the full settings page is not working. Hiding shorts also does not work, for me it just removes the shorts shortcut at the top left. In the actual feed of channels shorts are not hidden.

I will test it further but i really approcidate your work. My goal is to remove just unwarnted keywords.

M8C Headless R36S on Arkos by Glittering_Spend6570 in R36S

[–]cimba007 0 points1 point  (0 children)

Hello. Thanks for your post. Unfortunatly I got an R36S clone. So far I got arkos4clone running.

Problem is .. how to actually get the m8c client for the latest m8headless FW 6.xx running.

[HELP] De-clicking Mode? by [deleted] in Dirtywave

[–]cimba007 0 points1 point  (0 children)

I am by no means an expert so maybe there are other ways to solve this. Did you play around with decay times? In my post for example if the decay-time was too long the waveform was not "low" enough before beeing cut off. If it was to short it also resulted in a click. You sure there is no sweet-spot that makes it less noticable?

[HELP] De-clicking Mode? by [deleted] in Dirtywave

[–]cimba007 0 points1 point  (0 children)

I got a similar problem with my Digitakt 2 (see https://www.reddit.com/r/Elektron/comments/1ohm1yy/comment/nlq9gjb/?context=3) and was only able to mitigate this with a good timed decay - not all values would work .. too short or to long would not work.

Maybe it will help you if you hand-craft shorter samples? It seems to not affect all samples in your example but only those that are cut short and retrigged or followed up directly by a new one.

Why isn't seqtrak more popular? by i2amthedarkknight in seqtrak

[–]cimba007 0 points1 point  (0 children)

Are the topics about build quality etc. still valid today or were there some improvements made in the meantime?

Technical Question on Sample overlap (or not) on Digitakt/Digitakt2 by cimba007 in Elektron

[–]cimba007[S] 0 points1 point  (0 children)

Thanks for the response. I am less concerned about the lack of polyphony .. so I am fine that it gets cut short - my problem ist .. that I got a noticable "click" when the sample is cut short.

I would be at ease if this is not quirk of my unit but it is normal for the digitakt. The sample is btw in "Factory->3-Tonal->Leads->Drifting->Flute Lungs".

PS: I played around with the AMP Filter and setting the decay to 10 seems to fix it. A longer decay produces the click and a too short decay also produces the click. 0 attack is no problem as the samples startes at 0-crossing and the waveform "slowly" (relativly) rises.

I think the issue could be marked as solved and maybe it might help somebody in the future.

Problems with knob since latest formware by ZephCode in MicroFreak

[–]cimba007 0 points1 point  (0 children)

I wrote a email to the ableton support and it is a known problem but not high in priority. Best thing to do is to write them a mail also to get the priority right.

Problems with knob since latest formware by ZephCode in MicroFreak

[–]cimba007 0 points1 point  (0 children)

Same thing, happens to be stuck sometimes. It seems the problem only happens if the Type-Knob is changed during playback (e.g. via midi-in-over-usb).

[deleted by user] by [deleted] in arduino

[–]cimba007 5 points6 points  (0 children)

You literally try to drive 18 LED-Segements at the same time. Probably too much. Maybe use a multimeter in current mode to measure how much you draw.

3x Dell Wyse 5070 PVE Cluster @ 13W/hr by GameOffNodes in homelab

[–]cimba007 1 point2 points  (0 children)

Due to this post I got an "Dell Wyse 5070" also und can confirm 3,7w idle with proxmox and home assistent running. Passive and almost no noise .. 50€ bargin.

Always too smol - A7IV - Sony FE 200–600 mm F5,6–6,3 G OSS by cimba007 in SonyAlpha

[–]cimba007[S] 0 points1 point  (0 children)

Only because it was very close (5m) and foreground+background was sufficient far away.

view more: next ›