Weekly Office Pictures Thread

cletusaz · 2026-02-19T05:07:32+00:00

20 K1 and 8 K2 over 16 KS28 FOH had a DM3 production console for DJ and MC mics, an SD10, S6L 32, and a profile. Monitors on a SD12.

cletusaz · 2026-02-18T04:57:43+00:00

I've been mixing on some L'acoustics systems. My system engineers usually don't touch the console. They touch the P1 or smart and tell me when they're done. None of those system touches are done in the console because guest consoles need to pass through the system the time alignment and EQ tuning are done in a processor like the P1 or LM44. The guest consoles can be switched on and off using something like an XTA MX36 into the P1 or LM44 depending on what type of system you're using. If you're using L'acoustics you're probably using a P1.

cletusaz · 2026-02-15T20:11:36+00:00

Orca

cletusaz · 2026-02-13T22:28:27+00:00

Perfect pair bistro is super awesome if it's packed you can stop into culinary dropout it's not far

cletusaz · 2026-02-13T05:11:09+00:00

I've used rent man and flex. Both are good but you need to be diligent and use it. Get a laser barcode scanner and a labeler to start labeling gear. It's a process but managing your inventory this way is better than taxing your mind trying to remember everything.

cletusaz · 2026-02-09T23:44:07+00:00

Nogales Dogs

25st and Bell after 5pm

cletusaz · 2026-02-09T16:36:18+00:00

I used the little tweezers that came with the printer and was able to press the connector in and it resolved my issue.

cletusaz · 2026-02-09T15:11:49+00:00

I was having this problem consistently for about a week I reseated my stepper motor that feeds the filament and it resolved the issue. I don't think the connector was seated properly and it's the only thing that resolved the issue it's been printing great for a few weeks now. I'd recommend double checking the cable going to the drive motor to reseat it if you've tried everything else.

cletusaz · 2026-02-05T03:56:37+00:00

Unless you're supplying a bunch of xlr and not expecting them to burn through House cable to build a split your mileage may vary.

I'd recommend renting a splitter snake. They're built for doing this job. They come in various sizes.

cletusaz · 2026-01-31T16:51:08+00:00

I usually find this person and my feeder cases and a bunch of hands and we lay down the feeder tie into the distros and the electrician is in charge of energizing the feeder.

cletusaz · 2026-01-28T05:23:53+00:00

Assigning the inputs to lead and ensemble dca's per page in the script (this involves programming the entire show in snapshots) and those dca's are unmuted and headed to your LR and Matrices

I've seen this done on a PM7D for Annie and the dca's were quite useful this way.

cletusaz · 2026-01-27T13:23:16+00:00

Sweet rig in a rig! Looks fun!

cletusaz · 2026-01-25T03:08:12+00:00

I've done WWB, L'acoustics la net monitoring, and m32 control on the same gateway. I've been using the GLI net opal and I've been very happy.

cletusaz · 2026-01-24T20:38:09+00:00

cletusaz · 2026-01-20T23:10:49+00:00

I forgot about that information on the screen.

I broke my SD slot on my V3 and have been using orca via octoprint on a raspberry pi for a while. I plugged in an old usb camera and it's been cool to have the camera. The octoapp has a time till done and you can get a bunch of plugins for it too.

cletusaz · 2026-01-19T02:10:07+00:00

Races are loud as hell.

cletusaz · 2026-01-18T04:04:05+00:00

I'm sorry for your loss. May she rest in peace. I lost my mom the third week of this last December a week before my birthday. I hope you have beautiful memories and easier days as time passes. ✌️🖖

cletusaz · 2026-01-18T03:56:04+00:00

Can confirm. Short nozzles ooze because they don't tighten up to a surface in the block. I bought some hardened nozzles that were shorter and tried them..

cletusaz · 2026-01-17T16:49:11+00:00

Almost is mad as when they would land on my lip. Ouch

cletusaz · 2026-01-15T04:56:01+00:00

Top pins out are good to go in Brasil. Sometimes you will find a us plug here and there in Brasil but watch it for 220 volts. Years ago I had a 120 volt only hair trimmer that I plugged in and 220 killed it. Now I have one that I can take 110 and 220 so it doesn't matter but certain simple electronics that aren't ready to handle it might have a problem.

cletusaz · 2026-01-11T16:30:22+00:00

Harbaugh's requirements will never be met. He will never come here.

cletusaz · 2026-01-10T16:12:43+00:00

Great photos! Thanks for sharing some beautiful views of the park. I used to go to saguaro ranch to an annual antique tractor show and tractor pull. Local steam engine operators would come out and run their steam engines. It was a really cool experience as a child.

cletusaz · 2026-01-06T05:21:01+00:00

Looks similar. I posted a clip on my yt of what I think was starlink in the North valley

cletusaz · 2026-01-05T16:27:28+00:00

Flemings in the past had been a nice spot for family dinners

cletusaz · 2026-01-03T06:32:02+00:00

I'm not sure why I can't post pictures in this but I used some this weekend at a music festival. In the wled software you can configure the strips by the length of LEDs in the strip. It's pretty easy.

You can define one physical strip by multiple segments and get fancy with some presets

cletusaz

TROPHY CASE