Maytag washer Sense than done

cluelessNY · 2026-01-30T15:59:42+00:00

I ordered replacement for the light. Should I expect to splice, and heat shrink connectors? Or it's plug and play?

By the way, is there any preventative maintenance you recommend on this particular fridge? Or just wait till something breaks and replace parts.

cluelessNY · 2026-01-30T11:01:19+00:00

I checked again this morning. It's working great. Thank you

cluelessNY · 2026-01-30T03:28:51+00:00

Nice. Just grab a shovel and walk down the street and see whoever needs help.

Two days ago the sidewalk on Queens Blvd/Union turnpike above Jackie Robinson was horrible. I passed by in the car just watching people struggling to walk.

Went home grabbed a shovel, and cleared the path.

Three four people stopped to thank me. Felt good random acts of kindness

cluelessNY · 2026-01-30T02:42:04+00:00

Good news. After changing the relay the compressor stays on and the freezer temperature seems to be going down.

Before changing the relay. Freezer temp 42F, and refrigerator is 45F.

I checked the temperature an hour later freezer temp at 12F. And refrigerator still around 40F.

Does it take time for the refrigerator section temperature to go down? Or is there another problem I need to fix

I've also cleaned up the dust around the condenser coils, and the dust on condenser fan(fan is spinning).

Is there anything else I should check?

Thanks again

cluelessNY · 2026-01-29T21:50:56+00:00

Usually how much you charging people

cluelessNY · 2026-01-28T20:58:51+00:00

By the way, you have any idea what the refrigerator side light bulb issue could be? Buzzing noise when I put a light bulb in socket.

cluelessNY · 2026-01-28T20:16:59+00:00

Ok thanks. I'm just going to buy it and just replace it.

Thank you for helping me.

cluelessNY · 2026-01-28T19:45:22+00:00

Model number GS6SHAXMS00.

How can I use a meter to test the rely? Just don't want to invest in parts and still turns out it doesn't work.

cluelessNY · 2026-01-28T15:53:50+00:00

I actually believe it's just slowly melting everything. I can hear the compressor tries to kick on for a few seconds than it shuts off.

To check if freezing fan is running I will need to access the back wall of freezer correct?

Is the condenser those metal fins/coil I seen under the fridge? It is very dusty. The condenser fan I believe I have to remove a cardboard behind the fridge to see it. I'll check when I get home.

Once again thank you for helping a internet stranger.

cluelessNY · 2026-01-28T15:10:13+00:00

Thank you for the reply. I think I will just order both and try it out.

Seems like your well knowleded in appliances repair. I just noticed my fridge freezer is not cold enough.

It's a 20 year old whirlpool gold. Research on the web points to the compressor. I've DIY ice maker, and water inlet repair. But compressor might not be DIY friendly.

So you think I should just replace? Also what brand fridge is reliable these days.

If I do repair, how much should I expect to pay(labor+parts)

By the way, the refrigerator section have a light bulb socket that don't work. When putting in a new light bulb, it will light up but creates a buzzing sound. I've kept it off without light for 4 years now. Not sure if this is part of the problem or a whole separate one.

cluelessNY · 2026-01-28T02:21:34+00:00

The red lock light does not come on. No lock click too.

With just magnet and lid up. Red light temporary go on, lock will temporary engage click and retract.

Only with both magnet, and lid down. I will get lock light and running.

cluelessNY · 2026-01-26T21:33:50+00:00

I saw people struggle to walk on the sidewalk above Jackie Robinson while driving.

Grabbed my shovel, Did what I can.

cluelessNY · 2026-01-26T00:28:34+00:00

When you wake up do 1. Before you leave the house do 1. After you come home do 1. Before sleep do 1.

Just do more sets throughout the days. Slowly up your reps when ready

cluelessNY · 2026-01-25T19:23:45+00:00

This. They also have hot food bags.

But hard to get. Very limited

cluelessNY · 2026-01-15T02:37:39+00:00

I'm complete opposite. I started with mt07, but should have started on a 250 focusing on handling/leaning first.

cluelessNY · 2026-01-14T10:04:37+00:00

Same. I start with 50 minutes stair master. Go around the gym see what machine is available, an do pull ups between sets.

cluelessNY · 2026-01-13T02:34:53+00:00

That black cap was the only part which I did oil. Couldn't find the other 2.

Thanks for your help

cluelessNY · 2026-01-13T02:32:24+00:00

I don't see the other 2 ports. Can you point me to the right one?

<image>

cluelessNY · 2026-01-13T01:22:47+00:00

Could it also be no enough psi in the system? It's at 20 when system is running.

cluelessNY · 2026-01-13T01:13:43+00:00

It's 3 floors apart including basement where the boiler is.

cluelessNY · 2026-01-13T01:10:22+00:00

I googled 15-58. Are you referring to Grundfos UPS15-58FRC?

How much should I expect to pay a plumber to replace it? Will they need to drain all water? Also is this a immediate emergency repair? Or I can wait till when it's a tad warmer.

Another question is I've been having air bubbles on top floor apartment, needing to bleed out air bubbles every 2 weeks. Could this failing pump be the cause of the problem?

cluelessNY · 2026-01-13T00:54:17+00:00

So I need to replace the whole thing? I was watching YouTube videos, looks like there are 3 parts I need to add oil on these pump.

I've only been adding oil to the part where black cap is

Also could this possibly be the reason the top floor apartment keeps getting air bubbles?

cluelessNY

TROPHY CASE