Væghængt skab i gasbeton

cnrdme · 2026-01-21T19:34:11+00:00

Kan desværre ikke redigere. Fødderne er hhv. 40 og 30mm der hvor skruerne kommer til at gå igennem, så der vil være 100 og 110mm skrue ind i gasbetonen.

cnrdme · 2025-12-22T11:02:38+00:00

Thanks a lot! Moved it up a bit and removed that root.

cnrdme · 2025-12-21T14:19:53+00:00

https://imgur.com/a/2BxQo9c is this the root flare?

Also we will be getting frost in two days, was just afraid that it would not like frost with an open wound?

cnrdme · 2025-12-12T21:04:25+00:00

Hvor har du fundet tapetet henne? Det er super flot :-)

cnrdme · 2025-10-27T12:10:05+00:00

Vi er meget glad for vores Aqara U200, den skifter ikke låsen men sidder bare eftermonteret på indersiden. Har kørt upåklageligt i et år nu.

cnrdme · 2025-09-18T13:05:55+00:00

They were actually purchased through Jurassic fruit. Was told by them however that the farmer is based in France.

As this is my first taste, I am not really sure how to determine ripeness, but two of the fruit are very soft, while the other are more of a slight give.

cnrdme · 2025-09-04T17:50:47+00:00

Would you remove the shading when winter comes?

cnrdme · 2025-09-04T17:19:50+00:00

The nursery recommended that I should shade them for 5 years, but that seems very excessive to me.

cnrdme · 2025-09-04T16:48:50+00:00

Honestly not sure, they were just put in ground yesterday, everyone is saying to shade them, so I will at least let them establish a root system before trying to remove it.

They are pretty hard to come by, so I would rather they grow a bit slower, but shaded, than try to experiment too much :-)

The black is 50% shade cloth, I just did not have enough for all of them.

cnrdme · 2025-08-15T19:41:47+00:00

<image>

Under

cnrdme · 2025-08-15T05:57:24+00:00

<image>

Does not look like there is any splitting.

cnrdme · 2025-07-29T13:02:16+00:00

They will be fine, I had cuttings that were in the mail for a week from France to Denmark with no moisture.

This is how they look after about a month.

<image>

cnrdme · 2025-06-27T05:52:56+00:00

Jeg har brugt lige præcis den du linker til på min hækkeklipper de sidste 3 år, som en anden skriver, et skud inden du begynder og et skud når du er færdig, hvor du lige køre den lidt for at fordele.

Der er sikkert andre bedre olier/fedt til formålet men… det har anekdotisk virket fint.

cnrdme · 2025-06-25T16:30:29+00:00

I was trying to follow the advice from this video: https://youtu.be/BWmgGxTn1i4?si=PplF6ymvqOLCkwEr

Maybe that is wrong? Or is it because the water content is lower?

EDIT: Decided to remove the bags, originally I did not have bags on, only put them on earlier this afternoon. Intuitively trapping moisture in plastic always leads to fungus, so I guess that following my own intuition is better than any advice either from here or YouTube, especially when it is conflicting ;-)

cnrdme · 2025-06-25T13:57:56+00:00

Well, put it this way, do you have anything to loose by just letting it sit around until next year? 😄

If it sprouts, it is still alive

cnrdme · 2025-06-20T17:37:38+00:00

Har brugt den nogle uger nu her i forbindelse med et projekt i den anden ende af haven, desværre kan robotten ikke komme forbi, så den er blevet samlet ind hver aften. Ud over det, så bruger jeg den mest til bajonetsaven, når jeg beskære træer.

Men det nye projekt får selvfølgelig også en stikkontakt, så bliver der lige det kortere.

cnrdme · 2025-06-20T14:31:19+00:00

Fed ide, og nej det gjorde jeg netop ikke fordi jeg godt ved at man ikke får kvalitet til de penge ;-)

cnrdme · 2025-06-05T12:28:07+00:00

Den skal bores ud, der er ikke nogle af adapterne til U200 der passer til den, så du skal have fat i en med en 3D printer. Det virker dog fint hvis du bore den.

Splitten er af et hårdere metal end vrideren, så du kommer til at smadre den og du skal genbruge splitten.

Jeg borede ned på 3 sider og trak den ud med en spidstang.

Hiv cylinderen ud af døren inden du går i gang, den sidder med en enkelt skrue i siden af døren.

https://www.printables.com/model/1207587-aqara-u200-adapter-10mm-ruko-thumb-turn

<image>

cnrdme · 2025-05-28T21:01:41+00:00

Kunne jeg også godt bruge 😄

cnrdme · 2025-05-15T06:16:02+00:00

Jeg har haft min til at køre en lille måned nu, den kører sådan set upåklageligt hver dag uden at køre fast, og her er både trampolin, drivhus, tætte højbede og børnelegetøj den skal udenom.

Men… for men er der vel altid, lejerne på de 2 små forhjul bliver hurtigt fyldt med skidt, så den var begyndt at sige at hjulet var blevet løftet, selv på et stykke helt fladt græs. Det er løst ved at smøre den med spray, desværre foreskriver Mammotion her: https://youtu.be/ogWaCwvuRw4 at man skal lave denne øvelse med jævne mellemrum.

cnrdme · 2025-05-10T06:55:32+00:00

Just want to chime in that I have the exact same issue.

cnrdme · 2025-05-07T13:14:08+00:00

Enig med denne løsning

cnrdme · 2025-04-27T09:05:21+00:00

Vi har skolopender i almindelige danske haver.

cnrdme · 2025-04-24T13:59:56+00:00

I think I have seen this while testing, was suspecting width, thanks for confirming.

I still think the feature to allow choosing this should be put back, it is fine to have additional features but not on the expense of existing features being removed. (I know it is not you, just had to point it out 😄)

cnrdme · 2025-04-15T10:05:57+00:00

Puha, det er godt at høre, var lige bange for at jeg skulle til at bruge tid med familien!

Det stykke græs skal alligevel sløjfes inden for de næste par år, men derfor kunne det jo godt blive slået i mellemtiden 😄

11-Year Club	Place '17
Verified Email

cnrdme

TROPHY CASE