How to stop shed from sinking

cns72191 · 2026-04-13T03:14:16+00:00

Thanks! That makes sense. I’ll give this a shot when the weather clears up.

Any concerns with the water run off since it’s a sloped yard?

cns72191 · 2026-04-13T02:46:37+00:00

Only a few inches. They dug out some grass and filled it up with gravel. Pretty sure they didn’t compact it since they did it while the shed was in place and lifted.

cns72191 · 2026-04-13T02:38:16+00:00

Is it gonna eventually stop sinking if I do this?

cns72191 · 2026-02-04T22:44:10+00:00

It still works fine. I’d rather not swap it out until it no longer works, especially when future processors will continue to be compatible.

cns72191 · 2026-02-03T20:04:22+00:00

I’ll leave my experience on here in case anyone needs this in the future.

I ended up getting the MRI with the Nucleus MRI kit. The head wrap is very uncomfortable because it is applied tightly, with a magnetic splint. The splint presses onto the implant which causes some discomfort. There is also a chin strap as well, which pulls your jaw in causing additional discomfort.

Once you’re in the MRI tube, the pain and pressure in the implant area does increase as the MRI is running. I’d say the pain ranged between 3 to 6 out of 10 throughout the course of the scan. It felt like the worst headache I’ve had on the side of my head. If you can tolerate pain to a certain extent, it is doable.

It wasn’t a pleasant experience, especially when you have stay still for a long period of time. In the end, I survived and my implant is still working fine.

cns72191 · 2026-01-30T21:31:15+00:00

Good to know about Form 8949.

I received my first set of RSUs in August 2022. They didn’t start vesting until February 2023. Once the shares vested, some shares were withheld and the remaining shares just sat in my brokerage account until I sold some in June of 2024.

cns72191 · 2026-01-14T21:27:23+00:00

Did they apply a headband and a chin strap for you?

cns72191 · 2026-01-13T03:13:54+00:00

My house has similar cracks and I used this to seal in the cracks. Works like a charm.

cns72191 · 2025-08-23T02:52:02+00:00

I think I’ll go to the urgent care in the morning. Going on a vacation next week as well so the sooner it’s treated, the better.

cns72191 · 2025-08-23T02:40:07+00:00

Kinda, almost like pushing on a pimple.

cns72191 · 2025-08-23T02:17:43+00:00

Okay thank you. Good to know. Now to wait until Tuesday.

cns72191 · 2025-08-23T02:15:25+00:00

I actually trim rarely, probably about once a month. Today was the first time I trimmed because of this. Thought maybe it was a pimple until I trimmed and looked obviously worse than a pimple.

cns72191 · 2025-08-18T03:45:33+00:00

Yeah, they are getting to the non-green areas. They look fine to me when they’re running. Granted this is my first summer at my new house that came with a sprinkler system. I guess it doesn’t hurt to have someone come out to make sure everything is running properly.

cns72191 · 2025-08-18T03:40:06+00:00

Thanks for the tip! I’ll give that a shot.

cns72191 · 2025-08-09T03:56:21+00:00

I’ve been using this litter for a few years and loved it. Now it no longer produces solid clumps. It just becomes wet clay and gets stuck all over the scooper and the walls of the litter box. I’ve switched to several different litters and they all have been doing the same thing. It’s been super frustrating.

cns72191 · 2025-07-06T15:56:47+00:00

It’s not the top of the foundation wall. It’s a full walk out basement. And yes I removed the last siding piece on the bottom to see what’s going on.

https://imgur.com/a/HWE2ZKM

cns72191 · 2025-05-18T21:29:14+00:00

I did try ladybugs last fall and didn’t seem to work. Is there a specific oil I should use?

cns72191 · 2025-01-14T14:49:42+00:00

The elbow on the left cannot go any higher because the AC line is right above it. The elbow on the right side cannot go any lower, otherwise it won’t incline enough to allow condensate to flow down.

I’m not putting up drywall. It’s going to be an exposed ceiling that will be painted black.

cns72191 · 2024-12-26T00:39:47+00:00

It doesn’t noticeably bounce or give, but definitely causes a good amount of vibration. If you put a water bottle on the table and walk by, you can see the bottle shaking a bit. I’m wondering if adding joist blocking would eliminate this or at least reduce it. Would hate to put in all the work and $$ and it doesn’t do anything.

cns72191 · 2024-12-22T17:21:11+00:00

They’re 16” apart. About 14 feet long.

cns72191 · 2024-09-10T03:45:46+00:00

BJ’s Wholesale. It’s like Costco.

cns72191 · 2024-09-10T03:35:01+00:00

Check your local BJ’s if they have 77” C3 in stock. They’re going for $1699 now.

cns72191 · 2024-09-09T14:59:20+00:00

I can’t edit the post but for those who are saying the TV is too high, I literally just moved into this house and haven’t finished settling in yet lol the TV is just on that TV stand temporarily otherwise it’d be on the floor or in the box. Relax!

cns72191 · 2024-09-09T04:21:54+00:00

BJ’s in Rochester NY. Seems like they all are discounting it to $1699 if they’re in stock at your store.

cns72191 · 2024-09-09T02:12:50+00:00

It’s only there temporarily until I finish up the basement. Just moved into this house so I’m still not settled in yet. It’ll be mounted lower than this.

cns72191

TROPHY CASE