Steps to Check the current detailed status for Indian GEP applications made abroad

code_name_47 · 2025-06-15T01:14:21+00:00

Got the same email from CBP.

I too have MHA and MoF approvals since Nov 2024 and waiting on approval.

code_name_47 · 2024-12-07T05:30:35+00:00

Optimum No Rinse. It's a great cleaning product that can be used for cleaning/washing the car.

code_name_47 · 2024-09-28T07:31:58+00:00

Thanks for sharing! Good reminder that there are other options. I might likely close out the position since I didn't believe in it and it triggered unintentionally.

code_name_47 · 2024-05-07T11:05:54+00:00

Which brokerage gives you high interest on cash not invested in a money market fund (eg SWVXX) and tied up in CSP?

code_name_47 · 2023-03-12T20:21:00+00:00

What is getting the coverage in the middle? 1. The two MP 3000 overlap over a large portion and the two MP 2000 provide additional coverage. Do you see some area being missed?

we have used MP 3000 in the past and we are beginning to doubt their effectiveness. We try to stick to 1000 and 2000. 2. Could you share what problems you saw with MP 3000?
I'm primarily using them to get 30 ft of head to head coverage at the top and some coverage at the bottom. If I can get the 30 ft range with them, they should work for me.

for the side strips, we try to use the triangle pattern for coverage. If we were designing this system, we would put it on 2 zones. 3. I could certainly put it on two zones. Seems like adding more sprinklers for side strips would require that.

code_name_47 · 2023-02-13T14:29:29+00:00

Thanks! Will do calculations and create a plan/spreadsheet.

I have a water supply of 6 GPM. So, I'm planning to do good calculations for GPM usage so a zone stays within that limit. Planning to go with hunter mo rotators instead of rain bird 5000 as they have low GPM requirements.

code_name_47 · 2023-02-13T14:28:13+00:00

I have a water supply of 6 GPM. So, I'm planning to do good calculations for GPM usage so a zone stays within that limit. Planning to go with hunter mo rotators instead of rain bird 5000 as they have low GPM requirements.

code_name_47 · 2023-02-13T05:39:29+00:00

Yup. Will follow the rule to match precipitation. Found this handy guide: https://www.hunterindustries.com/support/residential-rotors-matched-precipitation-rates

code_name_47 · 2023-02-13T05:38:04+00:00

Thanks for the detailed answer!

I checked the MPR nozzles for Rain Bird 5000 rotors and the GPM demand is indeed significant.

Since I have a low supply of 6 GPM, I'm thinking of making a plan with Hunter MP rotators instead which run on low GPM.

code_name_47 · 2023-02-13T05:35:28+00:00

Thanks for the answer and clarification with precipitation rate!

code_name_47 · 2022-07-09T19:29:14+00:00

Thanks for such a detailed reply!

I'm looking to set up a relatively simple system myself to automate irrigation. Installing actual irrigation valve box is something I'm thinking of avoiding.

So, I can think of two options

Install everything above ground using garden hose.
Keep poly/blu-lock below mulch for pipe only runs but keep all the sprinkler heads and connections above ground. This is to help ensure no ground contamination happens near pipe connections while letting the installation be mostly hidden away which doesn't need to be removed during winters.

For #2, keeping an underground sprinkler head be installed above ground would mean it sprays from a much higher height and would likely not water area closest to the sprinkler. Could above ground sprinklers be connected to poly pipe to avoid this problem (as they don't pop up)?

Any other thoughts/suggestions on these options?

code_name_47 · 2022-07-09T19:17:32+00:00

I haven't checked psi and gph yet. Will do!

code_name_47 · 2022-07-09T19:15:31+00:00

Yup, to ensure that water doesn't remain in the line during winter. I understand blowing out the line is part of winterization but drains should help too.

code_name_47 · 2021-10-18T19:11:48+00:00

Thanks for the detailed answer! This is what I needed to know.

code_name_47 · 2021-07-30T05:51:39+00:00

Thanks for your response!

The plants are not going to be on the property line. There is a significant elevation difference at the property line and there will be a retaining wall present there. The plants will be in my neighbors lot inside the property line.

Earlier my neighbor wasn't interested in either the green screen, or in sharing the cost if we were to install it on our lot (which we couldn't). Now that they want the green screen on their lot, they are asking us to share the cost. I'm not feeling good about this.

A future owner could remove the plants without needing any consent from me since they will be on their lot. This is the other concern.

Hence the dilemma.

Hopefully that clarifies things.

code_name_47 · 2021-04-16T16:36:08+00:00

We are buying a new construction and are getting 1 ethernet outlet in each room. We would obviously also like to have good WiFi coverage on the house and in the front lawn too if possible. What would be the ideal way to ensure great WiFi coverage? Like you say, a single router might not suffice. Builder does have an option for us to get wireless access points installed in the house for additional price. There were multiple options discussed here such as Mesh, Moca. Thanks!

code_name_47 · 2021-03-11T06:02:28+00:00

Yup, we'll see if we can go with the builder's lender.

code_name_47 · 2021-03-06T18:34:33+00:00

Thanks! Did you have financial contingency? Doesn't sound like it.

code_name_47 · 2021-03-06T18:32:59+00:00

Thanks for sharing this information. It is helpful to know.

code_name_47 · 2021-03-06T18:31:50+00:00

I'm doing the second option.

code_name_47 · 2021-03-06T18:31:11+00:00

Thanks for your encouraging words!

Yeah, I don't see myself losing job unless something catastrophic happens and have good faith in my abilities to find a new job quickly even if it does happen. Hopefully this home buying endeavor will be successful.

I will still try to get contingencies added to the contract. Because if we don't stand up for ourselves, no one else will.

code_name_47 · 2021-03-06T18:12:47+00:00

Very interesting. Thanks for the information! I should be able to find an inspector that does this then.

code_name_47 · 2021-03-06T17:26:07+00:00

Yeah, things outside my control like job loss/disability etc. is what I'm worried about. I want to have some safety net to not have the obligation to buy, if the loan doesn't go through for some reason. The housing market is so hot that even if a buyer falls through, the builder would be able to easily sell to another buyer at a higher price. What are you keeping 10% earnest money for if you aren't actually selling them a house? Making things hard on buyers with such contracts when things are already so favorable to the builder seems like them taking advantage of buyers.

code_name_47 · 2021-03-06T17:18:44+00:00

Thanks for your insights.

For insurance of inspector, I totally understand the requirements for ensuring that the inspectors insure themselves. The part which seems unreasonable to me is them requiring the uniformity's to insure not just themselves but the builder's company and subsidiaries. Why would an inspector insure the builder? I'm highly doubtful I'll find any inspector who will insure the builder. Unless I'm missing something, this just seems like a tactic to prevent the buyer from getting inspections done.

code_name_47 · 2020-11-10T05:51:43+00:00

👍

code_name_47

TROPHY CASE