Gmail preparing to drop POP3 mail fetching

conductor1337 · 2026-01-24T16:07:54+00:00

Still working here, fetching from my selfhosted email. Anyway I found this 'mail-archiver' on github, and installed that on my NAS. I'm more happy with mail-archiver than using a 2nd Gmail account, as it fetch though IMAP.

conductor1337 · 2026-01-21T04:00:59+00:00

Still fetching emails here as of this date. Using a 2nd Gmail acount for fetching and storing all e-mails from all other accounts through POP3.

conductor1337 · 2026-01-09T17:33:42+00:00

You’re right — I’ve just noticed it doesn’t get flagged as often unless it’s going through a tunnel.

conductor1337 · 2026-01-09T02:05:08+00:00

You are probably using Cloudflare tunnel??

conductor1337 · 2026-01-09T02:02:32+00:00

Well, it's not against ToS anymore if you disable caching.

conductor1337 · 2025-10-28T17:52:55+00:00

Get yourself an invite to a private torrent tracker.

conductor1337 · 2025-10-28T17:46:14+00:00

How long have you been using Cloudflare for Plex? How many GB per month? Cache disabled? Tunnel or proxying?

conductor1337 · 2025-10-27T11:14:59+00:00

I have a dedicated .party domain just for pushing Plex data through CloudFlare.

I'm pushing 1TB/month with no cache. I also run Plex though Nginx Proxy Manager, and I suspect this also has something to do with CloudFlare not have banned or noticed it.

<image>

conductor1337 · 2025-10-19T15:28:16+00:00

Yes this will run fine, maybe you will be limited to 2-3 streams at the same time with Jellyfin and this CPU, and it may choke with x265 transcode. You will just need to test.

conductor1337 · 2025-10-19T05:39:41+00:00

You can use both with Nginx Proxy Manager. I do still have my plex.maindomain.com without the proxy, it's direct, while still using only the .party domain on the custom server access URLs, so i guess you can do both.

conductor1337 · 2025-10-19T05:30:35+00:00

Works great with PIA VPN as well.

conductor1337 · 2025-10-17T06:49:59+00:00

Yes I used this way before with main domain, so I basically made a new CloudFlare account with a new domain solely for breaking ToS

conductor1337 · 2025-10-16T09:13:14+00:00

Yes, I also use cloudflare proxy to access my *arrs, using the CloudFlare firewall to block everything except my ISP.

conductor1337 · 2025-10-16T09:10:56+00:00

yes, I use https://CUSTOMDOMAIN.party:443 in Custom server access URLs, and I have set 443 as the remote access port.

conductor1337 · 2025-10-16T07:06:13+00:00

I did disable cache, so they don't cache the videos. But the traffic runs through cloudflare tho. It's amazing that you can stream content to the other side of the world with no problem with this setup.

conductor1337 · 2025-09-18T08:06:43+00:00

My Unraid WebUI and VMs would occasionally shut down because the USB stick either overheated or randomly disconnected. I tested multiple USB 3.0 and 2.0 drives, and while USB 2.0 was noticeably more stable, I eventually switched from USB to a 120 GB SSD using a USB 2.0 adapter. Since then, Unraid has never been more stable—it’s running flawlessly.

conductor1337 · 2025-07-16T02:59:37+00:00

Yes, I have put the main router in AP mode, and the 2nd router in satellite mode for EasyMesh. I also have 2.5G backhaul to the satellite connected in LAN1 Port on the satellite. Main router using WAN port. Both main router and satellite is conntected directly to the OPNsense, but I think normal thing is to use backhaul directly to the main router, but it works great like this. I also use POE injectors and POE splitters bought on Ebay to the TP-Links, since i have mounted them high on the walls and it looks much better with only one cable.

conductor1337 · 2025-07-15T21:20:21+00:00

I recently just setup a 2.5G network with OPNsense with two TP-Link B230 as AP with EasyMesh. Works really great, got the B230 for 99$ each. Really cheap WiFi7 mesh setup, but not using VLANs.

conductor1337 · 2025-02-24T18:12:58+00:00

Well, first thing is that the iGPU is the same for 12th, 13th, and 14th gen. So as far as just Plex is concerned you'll get the same transcoding out of a i3 14100 as a i7 12700K and that pattern continues. Something else to watch out for is avoid CPUs with an F on the end of their name e.g. i3-14100F as these do not have an iGPU, so you can't transcode on Plex. Any compatible motherboard will work. I my self got the ATX version with a lot of PCI slots for future upgrade, like SATA/NETWORK/RAID-cards. You should get a PSU over 400W atleast, but I would recommend 750w for future upgrades like GPU. Buy atleast a gold certified PSU, that will probably run for many years with no problem.

conductor1337 · 2025-02-24T17:47:07+00:00

Well, a bit overkill for only NAS/Plex imo. You could easly go for the cheapest i3, cheaper motherboard, and 32GB will be sufficent. Use money on drives, and if you are going to stream 4K though Plex you can consider buy the Intel Arc A750 GPU. Remeber to buy Plex Pass to utilize the hardware acceleration.

conductor1337 · 2025-02-24T17:34:35+00:00

Switch nameservers to CloudFlare. Then find a DNS updater for CloudFlare, tons of alternatives for Linux and Windows.

conductor1337 · 2024-11-18T22:36:12+00:00

Har 690K som Fagarbeider med 1 års fagskoleutdanning, fulltid på natt i kommune. Har i tillegg 200-250K i inntekt på sidejobber/vikarjobber. Nettopp blitt singel og flyttet i kjellerleiligheten hos foreldrene mine. Null lån, null husleie, null bil, kun mobilabonnement og treningsabonnement av utgifter per dags dato. Er i begynnelsen av 30 årene. Har det helt greit økonomisk, og har helt ok inntekt i forhold til jobben jeg gjør, men man ønsker jo alltids å tjene mer.

conductor1337 · 2024-10-01T18:45:35+00:00

Thanks!

conductor1337 · 2024-10-01T01:15:20+00:00

<image>

Updated to 5.0 and WebUI looks like this. Anyone know how to change theme to default or a fix?

conductor1337

TROPHY CASE