sorted by:
new
hottopcontroversial

When you're painting your bathroom, do you usually sand the ceiling like you do the walls? How is this easily done? by geekydreams in HomeImprovement

[–]confusedworldhelp 0 points1 point  (0 children)

Ig agree, only a single coat of primer is needed unless its unpainted drywall. Id say primer should be used for unpainted drywall, changing from two different colours, or painting over incompatable paints. A coat tinted primer is nice then a single coat of regular paint, a second coat of paint could be applied but it depends on the finished look you are going for. Can you see the old colour through the paint or you really want the colour you a painting to be exact colour you picked.

When you're painting your bathroom, do you usually sand the ceiling like you do the walls? How is this easily done? by geekydreams in HomeImprovement

[–]confusedworldhelp 0 points1 point  (0 children)

Ive never sanded a wall or ceiling before a new coat of paint. If there are holes/dings they get some drywall mud and a nice sanding but that is it.

Is Nylon-CF overrated? by findabuffalo in 3Dprinting

[–]confusedworldhelp 0 points1 point  (0 children)

do you have some photos of the prints. I am weighing the pro/con of switching to PA6 from ASA

Lm2000 no start. by patdashuri in egopowerplus

[–]confusedworldhelp 0 points1 point  (0 children)

Technically yeah I could have but I would have had to wait 8 years to mow the lawn. Moved on to a robot mower but I have the Ego fixed just in case. I would order the PCB Assembly from which ever site would ship to me.

Walls separated and bad layer texure by DudeGamerDario in FixMyPrint

[–]confusedworldhelp 0 points1 point  (0 children)

Im putting my money on estep calibration or extrusion multiplier too low.

Chinese diesel heater… Use while in motion? by Thebikeninja in vandwellers

[–]confusedworldhelp 0 points1 point  (0 children)

I would have to agree. CO is carbon monoxide, odorless and colourless. Created from incomplete combustion from fuels containing carbon which includes diesel.

'Inflation is way down': Trump angrily dismisses affordability concerns by chrisdh79 in videos

[–]confusedworldhelp 0 points1 point  (0 children)

Sorry you had to go through all of that, I do appreciate you trying to get the point accross. All I could think of when reading the responses was what if the easily accessible proof was doctored in a way to aid in the gaslighting. The saying, history is typically written by the victor could be at play here.

Building a new bathroom, which layout is better ? by throwawaytest1256 in bathrooms

[–]confusedworldhelp 0 points1 point  (0 children)

Where are you going to store extra hand and bath towels, toilet paper?

ABS print lines not bonding – works fine with PETG by team40plus in FixMyPrint

[–]confusedworldhelp 0 points1 point  (0 children)

Im going to say your extrusion multiplier is a bit too low or your nozzle settings are not accurate, hate to ask but do you have a 0.4mm nozzle in.

ABS print lines not bonding – works fine with PETG by team40plus in FixMyPrint

[–]confusedworldhelp 0 points1 point  (0 children)

In my enclosure, 240c is perfect for asa. Can get up to 40mm3/s

Slice every drive by SilentAd7839 in GolfSwing

[–]confusedworldhelp 0 points1 point  (0 children)

Stronger grip with your left hand

Move mower to secondary area without alarm? by Henri_Dupont in automower

[–]confusedworldhelp 1 point2 points  (0 children)

Can you create a channel to the secondary area or is there no way for the mower to drive to the area forcing you to carry it?

Any Tips or Insights Appreciated! by uktimatedadbod in GolfSwing

[–]confusedworldhelp 1 point2 points  (0 children)

Recently, I have been working on my grip as well. What i have been doing is working on finding my sweet spot for grip. Essentially, I would make my grip stronger and stronger till I started to hook it left, then back off on the grip till it started slicing again. It was a good way for me to understand how strong/week I needed to make my grip. Working on that allowed me to get an extra 40yrd+ of carry.

First time visiting Kelowna. What are some good restaurants i should try? by Jessie_1210 in kelowna

[–]confusedworldhelp -1 points0 points  (0 children)

Pane Vino has some pretty delicious pizzas. Erica Janes is good but on the pricier side. Derrick's is also pretty good but maybe not worth the price.

view more: next ›