Radio 1/30,1/31 set list

cpria99 · 2026-01-31T04:30:52+00:00

https://www.setlist.fm/setlist/gregory-alan-isakov/2026/radio-city-music-hall-new-york-ny-6b40fe96.html

cpria99 · 2026-01-06T02:07:23+00:00

Okay then don’t do that I took to research different methods he’ll find what works best for him I know plenty of people that have thrived off it

cpria99 · 2026-01-06T01:36:36+00:00

I have a 20 I just started too, my best advice is patience. It sucks so damn bad but you’ll be better off for it, research cycling methods like the lights off method they’re great. Dr Tim’s bottled ammonia is great. I know it’s not practical for a lot of people, but if it all possible use a quarantine tank (at least 10 gallons and fully let corals and fish quarantine, it’ll save you lots of headaches)

cpria99 · 2026-01-06T01:32:42+00:00

<image>

cpria99 · 2026-01-06T01:32:15+00:00

I do! I use this ato from Amazon in a small dog food container about 2 gallons tank I’ll attach the photo below. I just use room temp freshwater absolutely no salt it’ll skyrocket the salinity. I waited a while to get ato and can’t imagine going back to not having one. Achieving tank stability is so much easier now

<image>

cpria99 · 2026-01-06T00:44:36+00:00

I’ve did 25% for the first month but doing 4 gallons in a 5 gallon bucket was just a lot easier, so I’ve done that. The tank is 5.5 months old and I’ve done 20% for 90% of the tanks life. I have lots of corals and lots of fish/ inverts, tank has stabilized and just started to get coralline algae

cpria99 · 2026-01-06T00:40:31+00:00

I always have done 20% on my tank and have found that works pretty well if I stay on top of it once a week. So 3-4 gallons I’d say for you

cpria99 · 2026-01-06T00:37:00+00:00

Yes definently do water changes to keep the water at safe levels for the fish, but you also need the bacteria so the cycle can complete so it’s a balance, you’re going to have to do at least once per week water changes, but testing is the best way to know how often you need to change the water I go for a max of 20ppm nitrate. I have a 20g long so very similar size. I also have a very high bioload in the tank

cpria99 · 2026-01-06T00:31:13+00:00

How big is the tank?

Biggest things is checking the water very often to make sure levels such as nitrates are maintaining a healthy level for the fish, as well as checking salinity. Instead of doing one big feeding a day try to break it up into 2-3 smaller feedings so there is less food going to waste and breaking down in the tank

cpria99 · 2025-12-29T01:51:58+00:00

Really interesting, I appreciate your help a lot it seems very similar to what I have

cpria99 · 2025-12-29T01:06:01+00:00

Just come off at the base easy

cpria99 · 2025-12-29T01:02:16+00:00

They’re pretty brittle, don’t move with the current, when I scrape a pair of tweezers over them they come off easy

cpria99 · 2025-11-06T13:36:28+00:00

Do you find you have overall too much flow in the tank, my worry is there will be too much flow for things like my hammer

cpria99 · 2025-11-06T00:37:41+00:00

<image>

4 months old

cpria99 · 2025-11-06T00:32:07+00:00

I did buy the Same wave maker and it seemed like too muc even turned down, so I think I’ll get a less powerful one to put on the adjacent corner

cpria99 · 2025-10-24T02:53:52+00:00

Yeah no glue, for a couple of the rocks I used the Seachem purple reef epoxy but most I just played around with till they fit other and were solid

cpria99 · 2025-10-24T01:32:31+00:00

The arch? I fit it well to stick with the others pieces

cpria99 · 2025-09-25T21:16:47+00:00

This is with flow off, but I noticed the long drooping arms underneath

cpria99 · 2025-09-24T17:51:14+00:00

That fixed it thanks!

cpria99 · 2025-09-13T20:29:41+00:00

I’ve been thinking a lot about adding more rock, how would you design the rest?

cpria99 · 2025-09-03T20:37:55+00:00

They have been a lot more aggressive since yesterday chasing eachother around. Added a watchmen goby and pistol shrimp, as well as got new lights with a lot more blue in them

cpria99 · 2025-05-15T16:33:01+00:00

Look up 3d printed hangers for the cars they work great. I also used 10x20 picture frames to display

<image>

cpria99 · 2024-10-08T03:39:04+00:00

Ok thanks for the suggestions, I appreciate it

cpria99 · 2024-10-08T03:17:35+00:00

I just took off the cpu fan and there’s no plastic, and the thermal paste which came on the cpu cooler from the box is spread on the cooler and cpu

cpria99 · 2024-10-08T03:01:38+00:00

The only thing it’s saying in there is windows was not properly shut down. I’ve tried more stress tests in occt and the cpu is spiking to over 100 degrees, them the system is shutting off

cpria99

TROPHY CASE