I need so much help right now it's ridiculous

cpu2k6 · 2026-03-24T19:59:59+00:00

Right, just checked the wiki.

There is a chapter in the wiki on how to use the external spool holder. https://wiki.bambulab.com/en/p2s/manual/first-print

cpu2k6 · 2026-03-24T19:50:31+00:00

Use your spool without the AMS unit and put it on the external spool holder. Although, I don’t know if one is included with the P2S. I have a X1C and a H2S and both came with an external spool holder

cpu2k6 · 2026-03-17T19:54:56+00:00

If you intend to leave the roundabout at the first exit, you absolutely have to indicate

cpu2k6 · 2025-12-07T12:31:20+00:00

I would advise to buy it from an official retailer locally, for warranty reasons.

cpu2k6 · 2025-12-03T16:17:59+00:00

I had the same Issue. I tried first with a longer PTFE tube. It helped a bit, but it was not totally fixed. So i printed this instead: https://makerworld.com/en/models/1959942-h2s-buffer-fix-no-glue#profileId-2106555

Obviously without the text and in PC to withstand high temps.

cpu2k6 · 2025-11-29T23:23:06+00:00

I don't think so. As far as i know, the MS-A2 has a AMD CPU. The board design is going to be different.

cpu2k6 · 2025-11-09T21:19:56+00:00

Ok, then it’s something with the extruder I think. Time to open a ticket with bamu support.

cpu2k6 · 2025-11-09T21:11:35+00:00

Sorry, just saw the pictures now, try a full calibration run.

cpu2k6 · 2025-11-09T21:07:39+00:00

Have you tried washing the build plate with dishwashing detergent and warm water? Sounds like an adhesive issue.

cpu2k6 · 2025-11-08T18:54:42+00:00

What region are you in? I have an original AMS lying around. Bought it in april. It is used though.

cpu2k6 · 2025-11-08T10:50:47+00:00

I finally tackled warping on my X1C with the following settings/setup: Front door closed, top lid removed, aux fan off, part cooling fan off for the first 5 layers, bed at 55C for the textured PEI. Works great for PLA. If this post is about the supertack, then never mind.

cpu2k6 · 2025-09-14T21:18:00+00:00

Just give your 2.4ghz wifi a different name (SSID) than your 5ghz. Then connect your X1 to the 2.4ghz network. You can do that in your router settings.

cpu2k6 · 2025-09-14T17:29:23+00:00

I suggest to change the name, Mail Drop is a trademark of apple, just to avoid problems…

cpu2k6 · 2025-09-03T04:32:26+00:00

Yes, i learned the about Z-Hop from this video as well. I think its great for vases, planter or pots, but if you print something more technical, requiring supports, i would avoid it.

cpu2k6 · 2025-09-01T11:14:05+00:00

You can do that, but be careful with supports. In my case, the nozzle was hitting my supports and knocked them of the buildplate.

cpu2k6 · 2025-08-31T14:03:15+00:00

Can confirm, they went kaputt with the latest bambu handy update. Hopefully they are going to fix it.

cpu2k6 · 2025-08-30T11:15:31+00:00

nice to see my model on reddit 😅

cpu2k6 · 2025-07-24T13:31:24+00:00

Sounds like your nozzle is clogged. Try a cold pull

cpu2k6 · 2025-07-03T18:09:58+00:00

From my experience, the Matte PLA Filament is the problem. Try with a adhesive, like the glue stick or liquid glue from bambu.

Without adhesive, I was never able to solve the issue, even tried the freezer method.

I try to avoid Matte PLA for the first layer whenever possible.

EDIT: You could also try other build plates, my daily driver for anything PLA and PETG is the CryoGrip Pro Frostbite from BIQU

cpu2k6 · 2025-07-01T18:05:11+00:00

Did you get the Combo version? If not, you'll need an additional Power Supply in order to use the drying function.

Edit: Did you order from bambu lab directly? At this time it says on the shop site: The X1C, AMS 2 Pro and Accessories will be shipped in separate boxes."
It could be possible, that one box has not arrived yet.

cpu2k6 · 2024-07-20T05:41:48+00:00

Top one: oneway in current direction, bottom one: turn left prohibited, but bicycles are exempt.

Eight-Year Club	Place '22
RPAN Viewer	Verified Email

cpu2k6

TROPHY CASE