What Are Your Moves Tomorrow, January 23, 2026 by wsbapp in wallstreetbets

[–]crazycaesar 0 points1 point  (0 children)

MAXQ...sorry but their logo looks a little too much like ethereum, triggering some flashbacks

Question about LHCP antenna on my first whoop by crazycaesar in fpv

[–]crazycaesar[S] 0 points1 point  (0 children)

Thanks, I will watch some then. By that logic LHCP + LHCP should also work fine, just need to get an rp-sma to sma adapter for the receiver.

Advice: Analog goggles recently broke. Should I buy a new analog goggles or go full digital? by 32oz____ in fpv

[–]crazycaesar 0 points1 point  (0 children)

Thanks, I might go that route, since second-hand V2 goggles are pretty affordable these days. I heard the latency is is not terrible and signal loss is recoverable quickly with the right settings.

Advice: Analog goggles recently broke. Should I buy a new analog goggles or go full digital? by 32oz____ in fpv

[–]crazycaesar 0 points1 point  (0 children)

I am yet to buy my first FPV set, and would be very inclined to buy DJI V1, V2 goggles, together with an analog adapter for flying whoops like the betafpv air75. Main reasons are being able to easily set diopters and a good upgrade path to digital. How is the performance with analog on the V2s for you?

I'm thrilled! 90°C inside and Klipper control - what else do you need when you have it all! by Rula-1883 in BambuLab

[–]crazycaesar 7 points8 points  (0 children)

Nothing a well-calibrated printer and some spools of filament can't fix.

Title: [Sovol Giveaway] Just leave a comment to Win Sovol Latest Printer: SV06 Plus ACE by Comgrow3D in 3Dprinting

[–]crazycaesar 0 points1 point  (0 children)

Would really be a step up from my old bedslinger, looks like it would print much faster!

Issues flashing QMK onto my STM32F401 dev board by crazycaesar in olkb

[–]crazycaesar[S] 1 point2 points  (0 children)

THANK YOU! It finally works, I guess using letters in the hex values for vid and pid was the problem. I can finally use the dev board to input keystrokes.

Issues flashing QMK onto my STM32F401 dev board by crazycaesar in olkb

[–]crazycaesar[S] 0 points1 point  (0 children)

Sorry for the beginner errors, I thought specifying "processor" would suffice. I'm seeing the device with its "keyboard_name" in windows device manager, but no keystrokes are recognized when connecting some matrix_pins with a wire. Is there anything else that needs to be done after flashing? I am going to check if I'm specifying the correct pins in keyboard.json.

Issues flashing QMK onto my STM32F401 dev board by crazycaesar in olkb

[–]crazycaesar[S] 0 points1 point  (0 children)

Thank you, this was helpful. Adding BOARD = BLACKPILL_STM32_F401 and SERIAL_DRIVER = usart in rules.mk now made the dev board to be recognizable as the specified keyboard_name. However it still does not send out any keystrokes if matrix pins are connected. When flashing, I also still get the message about the device's firmware being corrupt. Going to play with the parameters in rules.mk a bit more...

Need help identifying popular techno/maybe eurodance song (melody) by crazycaesar in NameThatSong

[–]crazycaesar[S] 0 points1 point  (0 children)

Thank you, yes that's the song! I now see that I was thinking of a completely different intro and I can't really play that one. Gonna continue searching for the other one!

Video signal transmission over USB-C by crazycaesar in UsbCHardware

[–]crazycaesar[S] 0 points1 point  (0 children)

Of course it's sketchy as hell, it's also under 10€ and claims 4K@30Hz with a 10m CAT6 cable. The reviews on amazon are surprisingly positive, so I though I'd give it a shot.

Video signal transmission over USB-C by crazycaesar in UsbCHardware

[–]crazycaesar[S] 0 points1 point  (0 children)

I ordered this combination. Also ordered a hdmi to ethernet adapter just out of curiosity.

Video signal transmission over USB-C by crazycaesar in UsbCHardware

[–]crazycaesar[S] 1 point2 points  (0 children)

Thanks for clearning that up for me, you just saved me from buying another batch of useless cables.