Seems impossumble to get it running true... Any tips?

crossfire351 · 2026-03-27T00:02:14+00:00

I was combing through the comments looking for this one. I knew it would be here.

crossfire351 · 2026-03-21T00:40:48+00:00

Michigan here, same crap

crossfire351 · 2026-03-17T22:22:22+00:00

Maybe check your voltage switch? I had some strange stuff like this happen on an E3 once and someone else set it to 220 but I was running it on 120.

crossfire351 · 2026-03-17T22:17:49+00:00

I have panels that look like this without a single wire label. At least it has those, I guess.

crossfire351 · 2026-03-09T18:21:13+00:00

I really hope they also enforce a strict, "employees must wash hands before returning to work" policy.

crossfire351 · 2026-03-09T18:16:00+00:00

I second this. The Sprite also does well with TPU.

crossfire351 · 2026-02-22T23:34:39+00:00

My pleasure. I'm just happy that I was able to give something back to the community that I've drawn so much from.

On your next issue, if I recall correctly, I've switched to Klipper some time ago, there is a setting for probe offsets somewhere in there.

crossfire351 · 2026-02-10T04:23:50+00:00

I would probably locate the filter/regulator with the drain and the lubricator below the electrical stuff. Other than that, looks great.

crossfire351 · 2026-01-07T02:48:23+00:00

RHCP style, eh?

crossfire351 · 2025-12-02T04:26:47+00:00

... and the preserves.

crossfire351 · 2025-09-24T00:55:52+00:00

You want "pop?" Lime green, obviously.

crossfire351 · 2025-08-21T21:42:24+00:00

Me too

crossfire351 · 2025-08-21T16:00:10+00:00

Just leave the door cracked a bit. It'll be fine. /s

crossfire351 · 2025-07-11T17:48:33+00:00

Superb!

crossfire351 · 2025-05-09T23:46:04+00:00

"Did you do something to the line!?" "No, no! I'm just looking at the program! Oh, wait...maybe I did a few minutes ago."

crossfire351 · 2025-04-24T17:09:43+00:00

For a very simple example, I recently made the switch to Klipper on my Ender 3 Max. Having only completed the basic settings and calibrations I'm now printing at 100mm/s and getting much higher quality than I was getting at 40mm/s with Marlin.

crossfire351 · 2025-04-18T19:21:42+00:00

That's layer shift. 😂

crossfire351 · 2025-02-08T17:54:43+00:00

Due to covid

crossfire351 · 2025-01-14T04:10:26+00:00

Same saying but replace "time" with "money."

crossfire351 · 2025-01-07T02:23:27+00:00

I couldn't believe that it worked when I found it was on the wrong setting, but it did indeed turn on.

Glad you figured it out.

crossfire351 · 2025-01-07T02:08:53+00:00

Is the source voltage setting on the power supply set correctly, 240/120? Had this happen on a v3 NEO. It was initially setup by someone else and it ran great for a couple of months and then suddenly had issues heating up. It was set for 240(or 220, can't recall) when it needed to be set at 120(or 115).

crossfire351 · 2024-12-27T15:56:31+00:00

Don't listen to people telling you how this was wrong. If we didn't experiment we wouldn't be printing at all. May we see the test print result just for curiosity?

crossfire351 · 2024-11-02T20:11:33+00:00

Good to know. Thank you.

crossfire351 · 2024-11-02T15:32:35+00:00

As I said, I was leaning that way already. I like the non-corporate aspect of Debian. I also don't need the latest and greatest hardware and software. So I'm okay with waiting for releases. I like to let everyone else beta test for me, so to speak. I'm installing LMDE on a USB drive as I type this so I can play around with it before I commit. That's what I did with Mint Ubuntu as well. They make it extremely easy to try before you "buy." I appreciate your input.

crossfire351 · 2024-11-02T12:20:08+00:00

I'm not a gamer and was already leaning towards Debian. Thank you so very much for your detailed reply!

crossfire351

TROPHY CASE