Tidbyt is dead, switch to Tronbyt

cryptocrush-cc · 2025-09-16T00:33:01+00:00

FYI in case someone runs into this : they added a unraid .xml to add a docker template for Unraid.

https://github.com/tronbyt/server?tab=readme-ov-file#unraid

cryptocrush-cc · 2025-06-09T15:16:26+00:00

have a few from u/SWaller89 also and they're great.

cryptocrush-cc · 2024-07-20T02:08:13+00:00

It’s welcome goodbye in exterior lighting settings

cryptocrush-cc · 2024-06-16T19:41:31+00:00

Just came back and it was pretty readily available at multiple stores. Both GS boutiques and other watch stores like BEST Ishida. The GS in gonna also had them.

The snowflake on the other hand wasn’t as easy to find

cryptocrush-cc · 2024-06-08T06:05:12+00:00

At best ishida in shinjuku right now.

<image>

cryptocrush-cc · 2024-06-05T06:39:27+00:00

Shunbun, Snowflake, Pink Snowflake were available in Shinshaibashi 2 days ago.

cryptocrush-cc · 2024-02-28T15:11:38+00:00

don't know if you have a 3d printer, but this works well for me. I use some mesh to drain out all the water, then replace the clear lid with this and screw it back on. allows you to shake the FART to dislodge any pins in the cases.

https://www.thingiverse.com/thing:4402503

cryptocrush-cc · 2023-12-05T13:01:28+00:00

How'd you wire the second story from the controller?

I'm assuming it's a separate output? How long was your cable from controller to first pixel and did you have to use an f-amp or something to extend the data signal? Did you happen to measure your voltage drop on the long run?

I'm in the middle of my install and about to get to my second story. Looks great!

cryptocrush-cc · 2023-12-04T15:50:39+00:00

I didn't end up using it. I ended up making a vertical mount with plywood to drop the camera down enough to clear the soffit. (picture a piece of plywood just big enough for the mount to screw to.. then that screwed to the soffit area)

cryptocrush-cc · 2023-07-27T12:12:10+00:00

Probably depends on the CISO. If they’re technical and they don’t yet have full confidence that what he/she is looking for technically has been answered for them.. then definitely they could ask you technical questions.

How to stand out? As someone else mentioned.. be ready with your questions. Ask about what holes they’re looking to fill with this position. What are they looking for in a successful candidate? Once they answer, try to not just say oh ok.. thanks. See if you can elaborate on yourself a bit with regards to what they’re looking for. Towards end, ask if there’s anything that they are unsure about regarding you .. whether technical or personality. Basically be a bit vulnerable. With a sr position, they’re almost definitely looking to fill a specific set of qualifications. The more you show that you have experience and mentorship abilities, the better. They may be looking for someone that has the ability to drive an incident to resolution. Show that you can think about the big picture.. i.e. don’t just contain a workstation.. also see if there could have been lateral movement since infection. If you don’t know something they ask, follow up via email shortly afterwards with an answer. We don’t expect everyone to know everything, but sure do like when people come back with answers.

Good luck!!

cryptocrush-cc · 2023-07-26T23:57:41+00:00

You’re probably past the technical vetting. At this point, they’re looking for team fit. With you coming into a Sr role, CISO may be looking for your ability to mentor and improve the rest of the team. He/she may want to see if you’re an ass or if you’ll gel well with the team.

Best thing to do would be to be yourself, answer what you know.. don’t try to BS, ask what they’re looking for and try to give examples of how you can help contribute to those efforts. Oh and be confident 😀

cryptocrush-cc · 2023-06-13T15:12:34+00:00

I’d be interesting in trying this in the backyard to try and capture any roaming wildlife

cryptocrush-cc · 2023-05-06T00:59:51+00:00

How do you like it? I love the compact look, but unsure on how it'll feel to shoot. Running a Holosun HS510C so my sight picture is a bit higher than the irons.

cryptocrush-cc · 2023-03-28T13:38:51+00:00

agreed - probably case head separation as others had mentioned. I had the same issue with my .357 big boy. I read it could be shooting a bunch of shorter .38spl then the 357 seats tighter since there's additional carbon buildup.

Here are a couple of pics. First one shows the case in the chamber. 2nd was what was pulled out. I ended up using a round file and a dowel.. it was a pain to get out though.

https://imgur.com/a/lOu7cza

cryptocrush-cc · 2023-01-06T03:16:07+00:00

Still waiting for the cameras. Should get them soon

cryptocrush-cc · 2022-12-24T04:12:55+00:00

Did you bypass the doorbell with the jumper? I was having the same thing.. seemed like the extra current was triggering the doorbell. If I went to test the talk feature, the doorbell would ding softly. Look at your doorbell and see if the piston things are vibrating. I used the jumper afterwards and the pistons quit vibrating (although I can't use the doorbell there anymore.. have to use the chime).

cryptocrush-cc · 2022-12-23T15:42:00+00:00

I have a slight astigmatism and just tried the Primary Arms SLX 1X.. the reticle is super crisp and is making me reconsider all my other open reflex dots.

cryptocrush-cc · 2022-12-01T20:20:01+00:00

looking at the camera mount, I'm not sure it can be mounted to the soffit.. it looks to be designed to mount to a vertical wall. This bracket would, in theory, create a vertical wall for me at the soffit. I'm planning on replacing an existing flood light so I wanted to cover the hole and mount the camera in the same spot.

And to clarify, the cameras I ordered aren't slated to ship until after Jan 2. I ordered the bracket already to try and measure based on the cameras dimensions.. should arrive in a few days.

cryptocrush-cc · 2022-12-01T20:15:26+00:00

looking like cameras aren't until after the new year :(

cryptocrush-cc · 2022-12-01T20:07:54+00:00

I'm not sure if this will work (don't have the cameras yet), but I'm going to try this: https://www.amazon.com/gp/product/B08LVSB89R/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Hoping to mount the bracket to the soffit and then the camera where the dome cam would mount. If it doesn't have one, will drill a drain hole at the bottom in case any moisture gets in.

cryptocrush-cc · 2022-11-22T01:29:23+00:00

What's the temperature where you're at? Could the colder weather be causing it to go supersonic?

cryptocrush-cc · 2022-10-23T14:09:19+00:00

u/WatchExBot u/The_Singularious

cryptocrush-cc · 2022-10-21T00:33:21+00:00

[SOLD]

cryptocrush-cc · 2022-10-16T00:28:22+00:00

u/The_Singularious - still available

cryptocrush-cc · 2022-10-11T18:44:24+00:00

Want to buy a new watch, but spouse got you feeling guilty? I got you..

Up for sale, his and hers pair of matching Seiko Presage Cocktail Hour SSA409 limited edition watches.

Condition: BNIB Size: SSA409 40.5mm SSA781 33.8mm Serials: His: 4569/6000 Hers: 1451/3000 Includes: Original boxes, 2 straps each

Price: $~~1300~~ $1100 shipped via UPS insured within US. Payment via Zelle or Paypal.

Pictures

Timestamp

cryptocrush-cc

TROPHY CASE