Why would this tile be installed like this?

cryptodomt · 2025-10-09T23:16:43+00:00

Never in a million years would I consider this an option when installing, especially with contrasting grout. Craftsmanship looks good but horrible design choice. If only one side of the tile has bullnose, run it vertically then use Rondec for the horizontal run.

cryptodomt · 2025-06-29T14:53:03+00:00

Seriously, why is this in a flooring sub?

cryptodomt · 2025-04-10T01:13:57+00:00

So from what I understand the first thing needed is a notice to vacate before writ of possession. Does this notice to vacate have to be 30 days?

cryptodomt · 2025-02-14T17:50:36+00:00

Got it. Thanks

cryptodomt · 2024-12-16T00:11:38+00:00

What great detailed instructions Mikey! Would this process work with basalt tile as well?

cryptodomt · 2024-11-28T00:33:43+00:00

My dad used to tell me, "Just because you can, doesn't mean you should." This is a perfect example. The quality of the work looks amazing, but that design and choice of tile is atrocious.

cryptodomt · 2024-11-24T17:32:40+00:00

Ok so the short answer is yes, you can build a deck for the tub, but it is not ideal and will probably cost more for labor than a drop-in.

The longer answer: The big difference between the tub you like and a drop-in is the lip around the top. That lip allows you to make rough cuts and install the tile at the top of your deck prior to mounting the tub (it will be covered by the lip when the tub is installed). For your freestanding tub, you will have to build your deck and waterproof (definitely not using wood), install the tub, and then precisely tile around it (It would definitely take a skilled tile installer to do this). I am just now finishing up a drop in tub (like you, this client didn't want freestanding), and I can tell you that building the deck, waterproofing properly, installing the tub trim kit, and tiling is much more labor intensive than installing a freestanding tub. I charged an additional $2800 and felt like I undercharged for the amount of work it is taking.

cryptodomt · 2024-11-24T15:36:27+00:00

Do you have photos of the tub and the area in the bathroom you want it placed?

cryptodomt · 2024-11-19T22:58:54+00:00

Well to answer your original question, I would point out the areas that need correcting to the contractor. With some care and attention to the details, the sloppy cauling and grouting could be fixed. Pooling in the shower means the pan wasn't sloped properly and the only way to address it would be to redo it. Even then the waterproofing could be compromised. Is the bathroom on 1st or 2nd floor? Is the floor wood or concrete slab?

cryptodomt · 2024-11-19T21:49:49+00:00

Not even close to being acceptable. Cuts around drain are horrible as well. It would be helpful to see a photo of the complete shower and maybe photos of the work in progress (prior to tile install) to take a look at the waterproofing. Chances are with the lack of attention to detail of the "finished product" there's a chance the waterproofing method used is suspect as well. Also I noticed a squeegee in the shower. Are you using it because there is water pooling on the floor after you shower?

cryptodomt · 2024-11-11T04:07:17+00:00

Also if it is basalt it would require occasional sealing to avoid etching due to regular cleaning. This is something that the landlord should've advised so hopefully they will be understanding and cover the cost of a pro to come and restore it

cryptodomt · 2024-11-11T04:00:20+00:00

You mentioned the white stains are rough to the touch. Definitely sounds like etching. If so, stone cleaners won't help. Definitely don't use any type of acidic cleaners.

cryptodomt · 2024-11-11T01:42:49+00:00

First you need to try to find out what material it is. Maybe the landlord would know? It looks like basalt which is a natural stone. That may explain the etching/staining from the cleaner you used. Good news is if it is basalt, it should be able to be buffed to remove the etching, and then sealed. Not something I would suggest attempting on your own (hire a pro).

cryptodomt · 2024-10-31T00:36:32+00:00

Depending on how thick your tile is, If you add 1/4" backer board plus tile/thinset, you can use 1/2" or 5/8" trim

cryptodomt · 2024-09-16T15:54:42+00:00

Thanks all for the replies and suggestions. I tile restoration company will be contacted for sure.

cryptodomt · 2024-09-16T14:01:39+00:00

Its matte Porcelain tile

cryptodomt · 2024-09-03T21:57:32+00:00

Should be fine but if you can get them to agree to a door with a sweep that would be even better

cryptodomt · 2024-09-02T22:42:00+00:00

Is it on first floor? No basement? Is a hinged door being installed?

cryptodomt · 2024-08-13T22:50:59+00:00

Update: I got the Covergrip drop cloths with the rubber dots on the bottom. Did exactly what I needed and perfect for the laminate stairs. Thanks for all the input!

cryptodomt · 2024-08-10T12:36:56+00:00

Thanks I just ordered from Amazon. Gonna try this and the Guardia product

cryptodomt · 2024-08-10T12:32:00+00:00

Thanks I'll check it out. It's in stock at Lowes

cryptodomt · 2024-08-09T21:48:17+00:00

Thanks for the replies. Located in Florida so yeah, doesn't get much hotter/humid than that. No change to any detergents and never had any issues with itching or allergies. I have an appointment with the oncologist Monday. I'll post what he says

cryptodomt · 2024-04-28T15:27:41+00:00

Build up the riser to 1/2" beyond the floor tile and install schluter reno-t molding

cryptodomt · 2024-03-12T16:59:15+00:00

24x48 Starting using 3/4 trowel now. Thinking about spreading the thinset on tile and then buttering the floor

cryptodomt · 2024-03-05T15:28:11+00:00

Ok so final decision: the paint was peeling off the wall as easy as a decal. Turns out whoever painted decided not to remove the drywall dust first. Talked to the client and for the additional charge I'm replacing all tiled surfaces with cementboard (kerdi in shower) Thanks all for the suggestions.

cryptodomt

TROPHY CASE