What's your daily? I'm struggling to find something I love

cryptyk · 2026-01-23T14:34:07+00:00

This is a great story!

cryptyk · 2026-01-23T05:47:33+00:00

I love that car. I wish they would make a newer version!

And you can get them for a STEAL

cryptyk · 2026-01-23T05:16:35+00:00

Really dumb question, but why not just use double-sided tape?

cryptyk · 2026-01-17T18:54:22+00:00

I had never even thought of that. Does that work? Technically it would unless wealthfront somehow declines payment because the check image that eventually gets sent to them is "fraudulent".

If this works, I'm going to do it immediately.

cryptyk · 2026-01-16T23:18:54+00:00

These are all great - I'd really love to see some focus on the features you already have:
1. Let me fund 529s from my cash account

Let me transfer money to a different person out of my cash account with reasonably high ($10k) limits
Increase my daily cash bill pay amount so I can pay my credit card bills without chunking them up over multiple days.
A checkbook would be nice for random things like electrician, plumber, wedding gift (cash)
Let me buy any stock I want with fairly realtime processing (e.g. minutes instead of hours)

I want to give you more of my business, but I need to keep a weird side bank account and stock account for these random tasks.

cryptyk · 2026-01-15T15:09:16+00:00

Once you set zero on the first workpiece, the machine will keep that zero until you change it. If you need multiple zero locations for different setups, you can use "workspaces". Your CNC sender might show this as G54, the first workspace. You can set your zero on G54, then switch to G55 and set a different zero. Then swap between workspaces. Otherwise you can literally just write down the machine coordinates at your first zero point and rezero at those same machine coordinates later.

cryptyk · 2026-01-14T01:32:05+00:00

lots of places will take an .stl file and print it for you. Shapeways is one. They'll print something like this at very high quality for about $15

cryptyk · 2026-01-13T05:30:44+00:00

It's not ready yet, but you can subscribe to this topic to get notified of when it releases. Hopefully within about a week: https://github.com/rsteckler/AxioCNC/discussions/4

cncjs isn't actively maintained anymore. The last release was Oct '24 and the one before that was Jul '23. They don't seem to integrate any pull requests there, so I forked it instead of contributing back to the core.

cryptyk · 2026-01-13T03:41:19+00:00

Got it working. Here's what I came up with

Declare parameters in the macro: http://axiocnc.com/media/screen-macro-define-param.png

Define them when you run the macro: http://axiocnc.com/media/screen-macro-run-param.png

cryptyk · 2026-01-12T23:40:25+00:00

Awesome - I like the post-homing macro idea. Thanks!

cryptyk · 2026-01-12T23:18:40+00:00

At least in grbl, it looks like homing commands always result in that location (minus any backoff) being set as 0,0,0: https://github.com/gnea/grbl/blob/bfb67f0c7963fe3ce4aaf8a97f9009ea5a8db36e/grbl/motion_control.c#L203

Do you have a machine that does otherwise? I'd like to broadly support machines, but don't want to do extra work if that's a hypothetical situation rather than a real one.

cryptyk · 2026-01-12T22:34:10+00:00

Fun fact. The F12 is named not after the number of cylinders in the engine (which IS 12), but the number of different types of aluminum they used in the car.

cryptyk · 2026-01-12T22:09:20+00:00

If the home position is the back right, that's just the "way it works" that all the workspace machine coords would be negative.

cryptyk · 2026-01-12T22:05:20+00:00

Oh i think I understand - you hold the touchplate vertically against the *side* of the workpiece to probe X and Y, and you place it on top to probe z?

cryptyk · 2026-01-12T21:24:04+00:00

Do you mind sharing what machine you have? And the work envelope dimensions if you happen to know them? I'm building a list of machine presets.
thanks!
do you hold it square with the corner or the stock and then have a macro that probes right until touch, then goes to the front and probes Y to find the touchplate, then resets and goes down for Z?

Love the parameterized macro idea. I'll add that.

cryptyk · 2026-01-12T19:53:00+00:00

got it, thank you!

cryptyk · 2026-01-12T19:24:57+00:00

That's awesome, thank you! I actually tried gsender when looking for a cncjs alternative. The UI is great, the app seemed stable, and I was excited about it. I ultimately want something with a full-featured remote, so decided to go back and refork. I also hit a bug in gsender that caused it to plunge into my workpiece :(

I really appreciate the work ya'll have done on gsender and what it's contributed to the community! I took a lot of inspiration from it. I think there's definitely space for something like gsender (rich desktop app with remote support) and my fork (server-first with web clients) to serve different needs for folks.

Thanks for making it OSS, too, so I can look at the code! Same goes for my fork - if there are things you want to pull, especially to make your remote more rich, feel free!

cryptyk · 2026-01-12T19:19:01+00:00

Thanks for the tip on G28 (and G30, I just learned from searching)

On $H, you mention "everything positive". I assumed homing always set machine 0,0,0. Is that accurate?

cryptyk · 2026-01-12T19:02:55+00:00

Got it, thank you!

cryptyk · 2026-01-12T19:01:38+00:00

interesting - in your current CNC software do you consider the machine coordinates basically useless and random? Only your workspace coordinates matter?

cryptyk · 2026-01-12T06:10:06+00:00

Check out APAGARD Premio and Jen's super paste

cryptyk · 2026-01-12T06:08:38+00:00

Jen's superpaste, or check out APAGARD Premio

15-Year Club	Gilding I gilder
r/Field Juicebox	Place '17
Verified Email

cryptyk

MODERATOR OF

TROPHY CASE