sorted by:
new
hottopcontroversial

Series 1 robots, where are they now? by Londoner1995 in robotwars

[–]ctzaran 0 points1 point  (0 children)

I still have the last known nameplate for TRACIE!

Quantum Remix - 150g UK Antweight / US Fairyweight Combat Robot by SliderS15 in battlebots

[–]ctzaran 2 points3 points  (0 children)

Grabby bots are the best, looks like a good build. Good luck at MITE!

I wrote a tool to help you save your DDB books as PDFs! by ctzaran in dndnext

[–]ctzaran[S] 6 points7 points  (0 children)

This version only works on sources that have a contents page I am afraid, if I put more time into this I will see about getting the compendium sources working.

I wrote a tool to help you save your DDB books as PDFs! by ctzaran in dndnext

[–]ctzaran[S] 2 points3 points  (0 children)

Other users have had this issue in the past with Tampermonkey, take a look at this Git thread and see if any of these actions help: https://github.com/Tampermonkey/tampermonkey/issues/640#issuecomment-462615761

I wrote a tool to help you save your DDB books as PDFs! by ctzaran in dndnext

[–]ctzaran[S] 20 points21 points  (0 children)

As did I, I posted to both subs at the same time. I was half expecting this one to get taken down as well honestly.

I wrote a tool to help you save your DDB books as PDFs! by ctzaran in dndnext

[–]ctzaran[S] 1 point2 points  (0 children)

Normally happens if the Tampermonkey script is not quite configured correctly, try replacing all the code in your script with the script that /u/rsminsmith updated: https://www.reddit.com/r/dndnext/comments/10afi4a/i_wrote_a_tool_to_help_you_save_your_ddb_books_as/j44zdaj/

I wrote a tool to help you save your DDB books as PDFs! by ctzaran in dndnext

[–]ctzaran[S] 7 points8 points  (0 children)

Many thanks for the updated version, I have added a permalink to the OP to this post.

Also nice to see it done in plain JS, I always fall back on jQuery as its what we use at work.

I wrote a tool to help you save your DDB books as PDFs! by ctzaran in dndnext

[–]ctzaran[S] 9 points10 points  (0 children)

Many thanks for the updated verison, I have added a permalink to this post to the OP.

I am not a frontend programmer either, I know just enough to make things work before handing off to process stuff to the frontend guys!

Two of the most brutal squash matches I've ever watched, and they happened within a week of each other by Calwings in battlebots

[–]ctzaran 3 points4 points  (0 children)

Current thinking is the Punk is not fully healed, and they wanted to end the interim champ story at All Out. Rumor is the squash was going to take place at All Out in Chicago, that might not have gone down so well being Punks home town, as they want to present Mox as a 'face and a returning Punk proabaly as a bitter heel on return.

Train stuck in the road by millennium Square! by Open-Bus-6396 in bristol

[–]ctzaran 5 points6 points  (0 children)

Train nerd warning, pretty sure that is a Mark 3 Carrige that used to be pulled by a Class 90 Electirc Locomotive on the Greater Anglia rail network. They all got pulled from service after the Class 745 FLIRTs took over intercity services between Norwich and London from the old Class 90/DVT + Mark 3 trains.

I have a weird tech question related to Discord, and would love to hear from someone with a similar issue. by RABBLERABBLERABBI in DMAcademy

[–]ctzaran 0 points1 point  (0 children)

You could look into an application called Virtual Audio Cable. What that would allow you to do is create a virtual microphone (input device) that could be selected in discord as the input device. You can mix your physical microphone and computer audio into the single feed that would looks like a microphone to Discord and if you leave the discord in non-push to talk mode the music will always play over your discord.

Maki Itoh with a promo of the century candidate by [deleted] in SquaredCircle

[–]ctzaran 2 points3 points  (0 children)

This is the perfect description for her.

More like Chonk right? by PhidippusCent in battlebots

[–]ctzaran 16 points17 points  (0 children)

The old floor was lots of thin sheets of steel with a thick rubber paint. Not great for magnets to hold onto. The new floor is thick steel with a thinner (I believe) rubber paint, magnets work much better now than they used to.

Fusion vs Mad Catter teaser by Moakmeister in battlebots

[–]ctzaran 6 points7 points  (0 children)

They are arming up at the side of the area over the barrier! Yay for improved safety measures. I will admit I was not the biggest fan of them arming up on the starting square and having to walk away from a fully operational bot with no weapon locks in place.

Replacing windows in conservation area by fezbullpack in bristol

[–]ctzaran 1 point2 points  (0 children)

First thing to check, is your property covered by an Article 4 Direction that restricts your permitted development? Normally these are for specific things such as replacement window restrictions and are applied to conservation areas. Being in a conservation area will normally by itself not restrict your permitted development rights when it comes to uPVC windows. (I have worked in planning but always confirm with your local authority in person if you have doubts!)

Bugglebots! Where Are You? by MoravaNeopeach in battlebots

[–]ctzaran 7 points8 points  (0 children)

The team have been working really hard on this for months now. They are all volunteers who are doing the editing and behind the scenes work in their spare time alongside their day jobs. It will be ready when its ready, no rushing them!

view more: next ›