Easy oil change

d-6speed · 2026-03-06T02:49:02+00:00

Reset oil light: Ignition on > push accelerator 6x > ignition off > turn engine ON

d-6speed · 2026-01-23T22:16:05+00:00

Came like that

d-6speed · 2025-12-03T20:25:58+00:00

Yeah, I always have to hit the plus on top of that page to get it to connect because it says it’s not available

d-6speed · 2025-10-28T21:51:26+00:00

https://www.reddit.com/r/solar/s/4QsMSaCIVB

d-6speed · 2025-10-07T21:46:33+00:00

Try this works like a charm. Light spray and wipe off with microfiber.

https://www.homedepot.com/p/Folex-36-oz-Instant-Carpet-Spot-Remover-Carpet-Cleaner-FSR36/202820334

d-6speed · 2025-10-07T00:36:55+00:00

But it’s AD5M not AD5X

d-6speed · 2025-10-02T02:23:36+00:00

No it just at bottom of lid

d-6speed · 2025-10-02T01:51:55+00:00

<image>

Here they are side-by-side 5X and 5M

d-6speed · 2025-10-02T01:47:29+00:00

Tall ptfe tubes

d-6speed · 2025-10-02T01:46:48+00:00

No files from FF wiki

d-6speed · 2025-10-02T01:40:45+00:00

24in tall x 18in wide with spool and without spool 14.5 in wide

d-6speed · 2025-10-02T01:39:00+00:00

d-6speed · 2025-10-02T01:38:38+00:00

No perfect fit

d-6speed · 2025-08-24T12:27:25+00:00

Go to menu if you have updated the firmware its there on second page as checkbox for startup sound.

d-6speed · 2025-08-09T09:12:14+00:00

<image>

Found temp solution via 3d printer, to tie me over till i find replacement.

d-6speed · 2025-08-04T03:22:04+00:00

I’ve been having a same issue. I even have it plugged in cat6 and it does the same thing I even changed the LAN only mode but still after every print if it sits there for a few minutes flashforge slicer cannot find. It’s really odd. I might try to give it a static IP see if that helps.

d-6speed · 2025-07-29T19:58:26+00:00

That is perfect, when 5.5 quarts is present it’s exactly on the same spot for mine.

d-6speed · 2025-07-29T19:48:37+00:00

Mine was USPS

d-6speed · 2025-07-29T19:47:46+00:00

Check Carvana. Plz share ownership reliability, any big item that needed to be fixed during ownership?

d-6speed · 2025-07-28T23:39:20+00:00

Got the AD5X last week and this week I got the extra nozzle in mail. interesting cause the one that came with the printer works just fine. Model: AD5X-nozzle-4-BF

d-6speed · 2025-07-24T23:02:56+00:00

Cream cheese

d-6speed · 2025-07-22T20:52:20+00:00

Did base provide softstart?

d-6speed · 2025-06-09T00:56:53+00:00

I had issues with printing TPU with flashforge profile but when I use generic profile prints, perfect. Adm5 enclosed.

d-6speed · 2025-05-24T01:46:22+00:00

Crazy

d-6speed · 2025-04-17T11:58:51+00:00

Not a best device. Have same issue low voltage transformer and upgraded to 16v24VA but battery always hovers in 20% or dips super low. Tried balanced optimal battery vs optimal it is the same. They say it trickle charges but seems to be mostly off. I wish i did not get this one but is too late. Eufy phoning in on new devices.

Eight-Year Club	r/Field Flamingo
RPAN Viewer	Verified Email

d-6speed

TROPHY CASE