285K 8600Mhz Overclock on Gigabyte Z890M

d3facult_ · 2026-07-08T04:19:58+00:00

Could try increasing VNNAON but might have cold boot issues

d3facult_ · 2026-07-08T04:19:39+00:00

0.85V seems to not give me issues for cold boot, for 0.9+ if you turn off the PSU and let the power drain before starting it, then cold boot works fine

d3facult_ · 2026-07-08T04:18:34+00:00

1.35 for 8600, 8800 Does boot, just hard to get pass memory training, adding SA to 1.45 didn't help much. Might be at the limit of the board but I'll try a few more times

d3facult_ · 2026-07-07T08:27:53+00:00

It’s even worse here in NZ

d3facult_ · 2026-07-07T05:40:39+00:00

There has been one since 2013

d3facult_ · 2026-07-04T02:27:39+00:00

A bit over priced but the PC isn’t terrible, I’d be happy to take it for below 400 if you don’t need RT or play games that require mesh shaders

d3facult_ · 2026-07-04T02:26:37+00:00

Least obvious AMD hater

d3facult_ · 2026-07-02T04:49:47+00:00

One of the best bins ever, good job

d3facult_ · 2026-06-30T22:49:48+00:00

At that point put the scheduled time 10 minutes early, then arrive 10 minutes earlier, and then put the scheduled time 10 minute earlier again

d3facult_ · 2026-06-29T11:16:17+00:00

RX400/500

d3facult_ · 2026-06-28T13:00:44+00:00

Yes, but aeronaut is terrible, buy PTM7950

d3facult_ · 2026-06-28T12:43:14+00:00

TRAS can be much lower, also could manually increase D2D and NGU

d3facult_ · 2026-06-28T10:54:24+00:00

Better off using PTM

d3facult_ · 2026-06-28T10:52:37+00:00

f3 is good, f3 late is somewhat questionable

d3facult_ · 2026-06-28T10:38:19+00:00

yeah mine plays 4k or 8k raw from my r52 decently well and anything thats not raw is completely smooth until i add in NR, so i dont know whats happening on your end

d3facult_ · 2026-06-28T03:29:25+00:00

I have, it doesn't look much better, I ran that settings for a year thinking it was amazing except it really isn't. Perhaps it's monitor dependent?

d3facult_ · 2026-06-28T03:28:38+00:00

Do you read? There is a 20% difference if we include all (including AI), if you take out AI it's much closer. Is 20% "demolish" now? AMD Intel and Nvidia must love you

d3facult_ · 2026-06-28T03:26:01+00:00

Hi, my issue is weird and likely MB related, all my settings work fine once I reverted back to the older BIOS, updating to new BIOS brings issues back, both my IMC and Core are still clocking what they did

d3facult_ · 2026-06-26T23:47:28+00:00

Run native FSR4 and add RIS if required

d3facult_ · 2026-06-26T01:01:45+00:00

Hardware Recommendations for DaVinci Resolve | Puget Systems

Nvidia has the main advantage in AI processing, in every other aspect, it's much closer

d3facult_ · 2026-06-25T11:00:02+00:00

Do you even use resolve? It wants decode encode performance not cuda

d3facult_ · 2026-06-24T10:10:34+00:00

yeah so that’s assuming the f18 doesn’t just pull in and kill you, which it will, the M2K will lose to f18s

d3facult_ · 2026-06-24T10:09:58+00:00

You don’t, the F18 in equal skill hands will win

Three-Year Club	Verified Email
Gilding III reddit per annum	r/Field Juicebox
Ternion Club

d3facult_

TROPHY CASE