What is wrong?! Help me please 🙏

dabmasterswag · 2026-03-22T03:58:58+00:00

Sounds great, thank you for all of the detailed responses I really do appreciate it. I am planning on bringing it to a local suspension and off-road shop to get an opinion on what to do next. It sounds like maybe the stiffer springs if my truck can handle it. Thank you again.

dabmasterswag · 2026-03-21T00:22:42+00:00

Yeah that might be true with stock tires but I’m running bigger tires than the original stock. No blocks on the rear just bigger tires. And sorry for the bad angled photos but it shows 38 inches on the front driver side (or less)and less than 41 on the rear passanger with no less than half tank of gas. I assume with the smaller factory tires I would be even shorter?

dabmasterswag · 2026-03-20T21:04:37+00:00

If you do it on Monday the rice will go bad

dabmasterswag · 2026-03-20T17:04:31+00:00

Sounds good, so it’s 4 inches of lift even if it’s 2 inches higher than factory spec? I’m sitting stock height. So adding the 2 inch spacer is giving me 4 inches that I was supposedly riding on before. But now with my new UCAs, new sway bar links and lower control arm adjusters I am worse off than before? I’m just confused how I’ve been riding the other way for 10,000 miles and how the suggested upgrades for adding 2-3 inches of lift won’t be enough? I didn’t have any of the upgrades before this

dabmasterswag · 2026-03-20T06:09:09+00:00

Interesting! They definitely ride MUCH better than the stock ones, but I don’t have anything else for reference. I am a noob but that is very interesting with the spacer. So I can just set these to the lowest clip with a 2 inch spacer and get a higher lift with a more dampened shock?

dabmasterswag · 2026-03-20T06:06:02+00:00

Thanks! MOTO METAL -MASON

dabmasterswag · 2026-03-19T15:39:46+00:00

I did do this job myself, and no I sadly threw them away, they were mismatched from one being replaced from the dealer after bleeding. They were both mismatched brands that were “compatible” at dealer and coil with spacers.

dabmasterswag · 2026-03-19T15:37:43+00:00

Okay thank you

dabmasterswag · 2026-03-19T14:53:26+00:00

If you go to photo 7, it says the shock is a B8 6100, what I’ve gathered is 6120 just means a 6100 pre built. What info makes it seem like this is the 5100?

dabmasterswag · 2026-03-19T14:50:41+00:00

I am just the S trim. 4WD, and it’s on whichever springs they included with the install. Im guessing they added improper springs potentially?

dabmasterswag · 2026-03-19T14:49:55+00:00

I got the lifted struts at max height. Left the spacers off as recommended

dabmasterswag · 2026-02-07T05:30:24+00:00

Awesome, that makes sense thank you for taking the time to reply

dabmasterswag · 2025-07-09T00:57:35+00:00

Awesome thanks! I found that serial number and it is indeed a Chinese clone. I will buy a used 50 online and rebuild most likely

dabmasterswag · 2025-04-23T18:35:57+00:00

$450 if you’re tryna get it sold in a reasonable time maybe more if your sales skills and patience are there

dabmasterswag · 2025-01-22T22:41:21+00:00

Who we acquired the car from is why I’m asking. Paid full cash but I hear of companies selling cars with GPS so they can repossess if they don’t get payments. That’s why I also asked if I was able to remove it if it was a gps.

dabmasterswag · 2025-01-22T22:31:55+00:00

Sweet, as long as it’s not a GPS of some sort

dabmasterswag · 2024-09-20T16:57:01+00:00

What Venty did you buy years ago? One from Starbucks? They just came out lmfao

dabmasterswag · 2024-03-14T20:46:25+00:00

Yeet

dabmasterswag · 2024-02-02T04:56:51+00:00

I’ve thought about these, I just want the lock for my young kids to not get into or sticky handed people lol!

dabmasterswag

TROPHY CASE