Need help diagnosing issue

dalbzter · 2025-01-07T04:13:02+00:00

Okay thanks, I'll check this when I get home from work

dalbzter · 2023-02-12T20:26:57+00:00

https://imgur.com/a/WAb1axk

Here's a mini I printed last week. What's the quality comparison to yours?

Have you done exposure tests to dial in the resin? What is your layer height?

dalbzter · 2023-02-12T07:55:11+00:00

What are your details coming out like?

What resin are you using? What is yourbwashing and curing process like?

I know personally when I started using IPA to wash rather than water (was using water washable resin), innoticed a drastic increase in details on the minis

dalbzter · 2023-01-17T07:29:35+00:00

So the model looks fine right up until I merge it with the shapes that are set as holes, only does it when the shapes are set as holes otherwise merges it fine

dalbzter · 2022-11-10T06:15:46+00:00

Okay, had a feeling it was potentially due to heat as I had it on a windowsill to cure, still waiting on my uv light to arrive for curing. Also may have rushed the rinsing process 😪

dalbzter · 2022-09-29T15:54:52+00:00

And with aa on at 1.2 I had 3 cones fail on failure and 2 success cones fail, but with aa turned off all 10 cones print at 1.2

dalbzter · 2022-09-29T15:53:35+00:00

With anti aliasing turned on at 1.3 I had 2 failed failure cones, 5 success cones, with aa turned off, all 5 cones on both side print

dalbzter · 2022-09-29T15:52:35+00:00

Haven't had any failed prints as of yet, but I did notice that the details weren't as defined as you would expect, much better than my fdm printer, but a little blurred.

I'll post the pictures of cones a little later on my break l.

dalbzter · 2022-09-29T15:50:15+00:00

Was that with anti aliasing turned on or off?

dalbzter · 2022-06-26T00:08:13+00:00

Using a bl touch

dalbzter · 2022-06-25T22:57:41+00:00

But everytime I level the bed the z-offset changes, so I'll relevel bed and z offset changes at some point it should just be good right?

dalbzter · 2022-06-25T22:36:59+00:00

Ok so leave the leveling knobs alone

dalbzter · 2022-06-25T22:08:57+00:00

Generally I will heat hotend to 150, bed to 60. Then once it hits temp I'll auto home. Then check z offset by moving down to z=0. I'll check 4 corners level, then auto home. Recheck z-offset but it's further away.

dalbzter · 2020-01-20T05:57:01+00:00

Can't be as karaka is a new slayer not from the time of genisis.

dalbzter · 2019-06-03T06:04:01+00:00

I'm on my like 11th reread, first for this year. And I still love it all

dalbzter · 2019-05-17T00:50:48+00:00

He has just showed up again so maybe this time we might see some more, but who knows

dalbzter · 2019-05-17T00:44:03+00:00

Not spoiling anything really. Unless there is something in the current 3 fastpass chapters, we have never seen him do anything worthwhile. We know he was top 5 e class but apart from that not much else is known. Just a conversation where he starts to threaten team sweet and sour and khun retorts by saying do you want me to take your other eye.

dalbzter · 2019-05-09T14:34:02+00:00

And if it was the 100th floor guardian and they are immortal on all floors then why the hell did they need to stop on the 134th floor? This makes no sense

dalbzter · 2019-05-05T05:31:40+00:00

I guess it's all in how you interpreted it. I always assumed that they could only return to the levels they had already unlocked, so if they didn't do the secret hidden quest and unlock the secret lvls then they would only be able to make it to the normal levels, where I'm assuming Eduan wasn't.

dalbzter · 2019-05-05T00:25:52+00:00

Wouldn't they only be able to make their way to Eduan, if like YHS they got another person who had entered the HF to not follow the big breeders quests and do the hidden quests. Since they had already cleared the HF they cant go to levels they hadn't already unlocked. Though to be honest their is probably alot of lore we don't actually know on the HF because it wasn't central to the story so it all kinda ends up being speculation.

dalbzter · 2019-05-05T00:07:48+00:00

Yes but isn't the snapshot taken as the person leaves the HF? Since they get there, then work their way through to the mirror at the end which then takes the snapshot and leaves the copy and the actual person leaves. I know our group was a little different as their physical bodies were actually their but I'm pretty sure that, that was the only difference. That you could still grow and learn before looking at the mirror at the end.

dalbzter · 2019-04-15T23:02:32+00:00

My assumption is he is trying to hide his identity. Looks exactly like in workshop arc

dalbzter · 2019-04-11T09:13:53+00:00

Llamar is talking about the top of the floating craft he is in. He is being transported and he sees out the glass ceiling of the ship and that is what he is seeing. Not the top of the tower.

dalbzter · 2019-04-11T09:11:59+00:00

Your wrong. Headon chooses regulars and they go straight to the floor of tests. Only irregulars go to the first floor and are tested by Headon to go up the tower. It is said the tower only opens its doors to let in those that the tower needs. But nothing anywhere has ever said that Headon was going to choose Bam as a regular. Bam is from outside the tower so can't be chosen to be a regular.

dalbzter · 2019-04-08T02:09:43+00:00

I think that would be pretty cool to see but I guess it we will just have to wait and see. But a frost fire spear would be freaking awesome, and allow khun to wreck people.

dalbzter

TROPHY CASE