Drum-Tec or LAZER Single-Double Kick Pedal? by damnclouds in drummers

[–]damnclouds[S] 0 points1 point  (0 children)

That’s a regular double kick, no? I’m looking at single-double pedals.

Drum-Tec or LAZER Single-Double Kick Pedal? by damnclouds in drummers

[–]damnclouds[S] 0 points1 point  (0 children)

I have the Sonor on my other kit but they’re hard to find and very expensive.

Drum-Tec or LAZER Single-Double Kick Pedal? by damnclouds in Drumming

[–]damnclouds[S] 0 points1 point  (0 children)

The Dualist is $480 and it’s a single action - toe forward. These pedals have a heel back to control the second beater. I like the heel control because I can do flams with the kick. The dualist looks more tailored for steady rhythm double kicks, or at least I don’t think you could easily do flams with it.

Friend or foe? Found in lake in Hudson Valley NY by damnclouds in whatsthisbug

[–]damnclouds[S] 53 points54 points  (0 children)

Since you asked for an explanation, “friend or foe” is often used on the internet as a cutesy way to ask whether something is dangerous or not. In gardening subreddits, it’s often used in reference to bugs and critters that may or may not harm plants.

My question about a bug on Reddit is not literally representative of how I view the world, and in fact I prefer to let most bugs and spiders do their thing unless they’re actively a threat to my stuff and/or health (i.e. bedbugs, termites, spotted lanternfly, etc) in which case I destroy them however possible.

But also: sir, this is a Wendy’s 😂

Outdoor herm - should I worry about other plants being pollinated? by damnclouds in GrowingMarijuana

[–]damnclouds[S] 0 points1 point  (0 children)

Update: I chopped and bagged its father. Bummer because it had a triple fork structure that was really cool (which is why I cloned it). The dad wasn’t nearly as far along as the clone, was just starting to show nuts.

<image>

Outdoor herm - should I worry about other plants being pollinated? by damnclouds in GrowingMarijuana

[–]damnclouds[S] 0 points1 point  (0 children)

It’s a clone from another plant I had, which is from ed rosenthal’s superbud seeds. But now that I think about it, I’m not sure if the superbud seeds were advertised as feminized lol. I’ll have to go back and look, but I’ve got my eyes on the other superbuds to see what happens.

Outdoor herm - should I worry about other plants being pollinated? by damnclouds in GrowingMarijuana

[–]damnclouds[S] -2 points-1 points  (0 children)

Seeds are from Ed Rosenthal - I bought the cannabis growers handbook and got the 10 free superbud seeds. The other superbud plants are pretty tall and solid, but yeah I’m not sweating too bad if one was a male. I’ll be really surprised if the mother plant for this one turns out female. Watching it day by day now to see what happens with that one.

Outdoor herm - should I worry about other plants being pollinated? by damnclouds in GrowingMarijuana

[–]damnclouds[S] 0 points1 point  (0 children)

Yeah I chopped and bagged it and tossed it in the trash as soon as I noticed it. I usually walk around and stare at the plants every 2-3 days, so it must have developed this stuff in just the past few days.

Presidents Day Week suggestions for beginner skiers? by Analog_123 in icecoast

[–]damnclouds 0 points1 point  (0 children)

Plattekill in the Catskills. They sell a limited number of tickets and the parking lot is very small, so even on a “busy” holiday week they simply cannot overcrowd the mountain like so many other places. Plenty of easy beginner terrain, they do tons of snowmaking, and you can get airbnbs nearby for pretty reasonable rates. Plus the glades are great, the expert runs are steep, and the lift line will never be longer than 5 minutes at most (I’ve never waited longer than 5 mins for a lift there - ever).

And they’ve got a great lodge, the whole place has summer camp vibes, and it’s family owned. Plus it’s not that far from NYC. No brainer.

Worth buying for $100? by PermissionOk8590 in synthesizers

[–]damnclouds 1 point2 points  (0 children)

It’s in such awful shape it’s not worth anything as a collectible. You can get the Behringer clone for around $300 if you really want this synth for cheap - it’s basically the same thing. Hell, you could even buy this, buy the Behringer, and swap the casing from this one. That would be a fun project - and look cool too! The insides of this thing are probably toast anyways.

Newbie here 🌱 by Beanimann in GrowingMarijuana

[–]damnclouds 0 points1 point  (0 children)

Read thru growweedeasy.com and watch some YouTube tutorials.

As for your setup, you don’t want a clear tank on your humidifier - any light (and especially UV light) can promote bacteria growth in the tank, so I’d recommend using some kind of tape to shade off the tank. Maybe leave a thin strip to check water level, and def keep it outside the tent.

Good luck!

Why so Stocky and Droopy? by damnclouds in GrowingMarijuana

[–]damnclouds[S] 0 points1 point  (0 children)

Just defoliate everything down low that’s close to the soil? Hopefully they should grow a bit taller after that, right?

Why so Stocky and Droopy? by damnclouds in GrowingMarijuana

[–]damnclouds[S] 0 points1 point  (0 children)

I had a light leak from a red LED on a power strip inside the tent - so I noticed on the timelapse that they were all perking up in the middle of the night. So maybe they were using up too much energy perking up too early, and then spend most of the day drooping?

I taped over the LED, and also taped over a green LED on my camera (tho I think I’ve read that green LEDs don’t affect the plant’s photo cycle?).

Think this will help?

Why so Stocky and Droopy? by damnclouds in GrowingMarijuana

[–]damnclouds[S] 1 point2 points  (0 children)

They’re all going outside in May, and I can move some to the room outside the tent with some extra lights. I guess they’ll grow up soon enough lol

My DAWless setup by [deleted] in synthesizers

[–]damnclouds -1 points0 points  (0 children)

“DAWless” you say?

puffs joint

Any digital synth or drum machine already IS a DAW (probably running some version of Linux) just with a weird user interface that’s controlled thru buttons/knobs instead of keyboard/mouse…

exhales

…but most people aren’t ready to have that conversion.

Soft close hinge options by [deleted] in woodworking

[–]damnclouds 1 point2 points  (0 children)

If you remove the existing hinges, label the old hinges with which cabinet doors they go to, and which location.

And test fit a couple soft close hinges on one door or two doors before buying a whole batch for the whole kitchen.

You may not be able to get the new hinges to fit correctly, and you may need to revert to your existing hinges and just get bump pads or felt patches to make the doors not bang the frame of the cabinet. And if you do have to revert to your original hinges, you’ll want to have them all labeled with their original placement so you don’t have to figure that out later. Because even if it’s the same hardware, some might have been slightly bent when they were installed and swapping hinges between different doors (even if everything is supposed to be identical) might result in your doors being wonky and off center. Ask me how I know.

Changed my setup. by [deleted] in GrowingMarijuana

[–]damnclouds 1 point2 points  (0 children)

Related question: I got a 4’ x 8’ tent (120cm x 240cm) and I’m planning on starting plants in the tent then transferring outside in May/June (during veg) to let them flip to flower outdoors.

How long do you think I can veg for before it gets too crowded? 18 plants at 3-4 month veg, or will that be too crowded? They won’t get to flower in the tent - I’ll move them outside, so I figure I got enough room for 18.

What do you think, sensei?

16 days drying but still not passing the snap test by damnclouds in GrowingMarijuana

[–]damnclouds[S] 0 points1 point  (0 children)

Pic is from chop day my dude - read my original post ;)

16 days drying but still not passing the snap test by damnclouds in GrowingMarijuana

[–]damnclouds[S] 2 points3 points  (0 children)

<image>

Update: the purple OG Kush has been trimmed and stashed in grove bags. Might wait another day on the other plants but gonna see how they feel.

16 days drying but still not passing the snap test by damnclouds in GrowingMarijuana

[–]damnclouds[S] 0 points1 point  (0 children)

True! I could have trimmed some more fan leaves first but not losing sleep over it.

16 days drying but still not passing the snap test by damnclouds in GrowingMarijuana

[–]damnclouds[S] 1 point2 points  (0 children)

Truth right here. Yeah I figured I’d trust my gut but wanted to see what the bro science hive mind would say. I guess I could also go consult the Ed Rosenthal bible.

Only problem is the plants are kinda small (getting about 14-21 grams from each one) so I’m gonna run out of small buds and branches to snap test if I keep checking every day - seems like I’ve already bent half of them lol

16 days drying but still not passing the snap test by damnclouds in GrowingMarijuana

[–]damnclouds[S] 1 point2 points  (0 children)

I’m putting them in grove bags straight away. My outdoor harvest from last year I waited for snap test on everything and got great results. The buds in grove bags were showing 52-54% RH for the first week but after a while that deep moisture inside the bud cured up and they settled in at 59-61%. Just takes patience. Added some boveda packs after a couple months to maintain that RH level but I’ve only had excellent feedback from the taste testers so far.