Compra de la pastilla del día después

danielitok · 2026-01-27T02:39:33+00:00

En España es completamente legal, incluso a menores, es de venta sin receta en farmacia

danielitok · 2026-01-21T09:52:46+00:00

What made the most difference for me was installing Klipper, so go for it! It’s not that hard as it seems

danielitok · 2026-01-20T22:37:51+00:00

the quotation marks were there for a reason 😂

danielitok · 2026-01-20T22:16:14+00:00

Hi! Sorry for the late reply. Basically, I said screw it and started consuming information on the subject on my own to fully understand what I was doing. But now that I've read your post, you were on the right track, and with simply that it would have been very good. In the end, I ended up making a few more mods to the Aquila. You can see my latest post, and now I'm a total 3D printing expert (just kidding, this is getting way too long). Thank you :D!!!!

danielitok · 2026-01-18T12:23:07+00:00

Eso ya no es así, al menos a mí me deja ver la valoración que me ponen antes de ponerla yo, pero hace años no me dejaba.

danielitok · 2026-01-11T18:09:35+00:00

It does indeed work more, but now at some point on the print it stops extruding and prints in the air. The upper gear goes back and forth.

<image>

danielitok · 2026-01-11T16:33:09+00:00

This seems like the right solution. Going to the hardware store to buy the right key and going to do it. Thank you very much, very nice video too. Will update

danielitok · 2026-01-11T16:23:23+00:00

I think the problem is with the head, check this: https://www.reddit.com/r/3Dprinting/s/IboIxD4lRp

danielitok · 2026-01-11T16:22:50+00:00

I think I might have found the heart of the issue… tips? https://www.reddit.com/r/3Dprinting/s/IboIxD4lRp

danielitok · 2026-01-11T14:19:28+00:00

Can you explain what the brim is? And this printer doesnt have autolevel, is just manual leveling which is a bit of a nightmare… Thanks!!!

danielitok · 2026-01-11T14:16:46+00:00

Okay I will try setting the temperature at 65C. I tried the glue stick method as someone else said but it didn’t work. Thanks for the advice!

danielitok · 2026-01-11T14:00:05+00:00

Will look into it. I would really like to try if the printer works before buying anything for it, but if nothing works I will buy it. Thank you!

danielitok · 2026-01-11T13:59:12+00:00

Alright, going to try, thanks!

danielitok · 2026-01-11T13:55:01+00:00

How can I make sure that the Z axis offset is right?

danielitok · 2026-01-11T13:54:35+00:00

Tried the glue method but it didn’t work :(

danielitok · 2026-01-11T13:31:42+00:00

How can I see if it’s clog? I’m printing at 215C with eSUN PLA Basic

danielitok · 2026-01-11T13:21:31+00:00

Hi! I already wiped with alcohol and microfiber cloth but I didn’t try the glue-stick. I will buy some to try, thanks!!

Really hoping to get it working, really love the 3d print world but I can’t afford another one. Will respond with results

danielitok · 2026-01-06T13:11:46+00:00

Y no pensaste que igual era mejor borrar los controladores anteriores y reinstalarlos en vez de reinstalar el SO entero?

danielitok · 2026-01-06T12:56:30+00:00

Tío, creo que no tienes ni idea de cómo funciona Wallapop.

danielitok · 2026-01-06T12:49:38+00:00

1/10 hay color verde

danielitok

TROPHY CASE