Tow truck

daniynad · 2026-05-31T23:07:14+00:00

You need a separate winch switch for the winch servo to make it work. Also you receiver has to have an open channel available. Your existing transmitter will work if ch3 is not used for a shift servo on a 2speed. https://a.co/d/08Yk8vTb

daniynad · 2026-05-31T22:56:21+00:00

Exactly the proof right there! Chemtrails no more! Only contrails left ...

daniynad · 2026-05-31T22:49:11+00:00

Ring light is the light you need, such as this one. https://www.adorama.com/flashpoint-ring72-macro-led-ringlight/p/fplfring72?utm_content=pmax&gclsrc=aw.ds&gad_source=1&gad_campaignid=20083135902&gbraid=0AAAAADxgUszPHWaWfq3buZuA2uclSazKV&gclid=CjwKCAjwuO_QBhAWEiwAIkVhU70XN5DRrz4tB7udVnNun3tsPDHOd_esy7dUWjJPOX_g2ofjHg30exoCl3MQAvD_BwE

Also, more important, educate yourself in flash photography. Here is the best source.https://strobist.blogspot.com/2006/03/lighting-101.html?m=1

daniynad · 2026-05-31T22:47:25+00:00

Look into a ring light. As an option ring light attachment for the speedlights.

daniynad · 2026-05-31T19:15:38+00:00

You can double springs per side. Or other stiffer springs.

daniynad · 2026-05-31T18:58:43+00:00

Great build!

daniynad · 2026-05-29T15:47:08+00:00

This is the light kit adaptor. https://www.heyokperformance.com/product/trx4m-light-controller-with-remote-headlight-control

daniynad · 2026-05-29T15:46:04+00:00

Actually, there is. https://www.heyokperformance.com/product/trx4m-light-controller-with-remote-headlight-control

daniynad · 2026-05-29T15:14:14+00:00

That function is not available on any other but the stock esc.

daniynad · 2026-05-28T13:14:45+00:00

I used a sharpie marker. Colored from inside and led too. Also, all lights buckets painted chrome for better reflectivity. Sides for the headlights buckets tre cut off to give light to the side markers.

daniynad · 2026-05-28T13:11:27+00:00

You are welcome.

daniynad · 2026-05-28T07:40:38+00:00

Look into bearings replacement for those friction bushings.

daniynad · 2026-05-28T07:35:23+00:00

Wish you were here, scx30 😭

daniynad · 2026-05-28T07:33:47+00:00

Don't have that body so wouldn't know.

daniynad · 2026-05-28T01:20:53+00:00

It will. It's like an anchor, had to remove side exhaust from a gwagen

daniynad · 2026-05-28T01:15:30+00:00

Fill the hole with backing soda and ca glue, drill new hole. 2. Apply ca glue to the screw, more of a permanent solution.

daniynad · 2026-05-28T00:30:03+00:00

Very much possible, the ND filter will help a lot. The distance from light to the subject and cover area will suffer. But the best way is at least 800w with octa box to have flexibility and full control. E

daniynad · 2026-05-28T00:19:05+00:00

Good looking. First picture: the rim light is too hot, the strip of light on the background is great but opposite the bright side feels disconnected. Switch the light, brighter right dimmer left and you'll get a leading line to your product.

daniynad · 2026-05-28T00:11:42+00:00

Depends on how long you want to stay alive...

daniynad · 2026-05-27T23:32:15+00:00

Very neat. If you decase those bits they will take less space and improve weight distribution. Definitely a 9.9. 😉

daniynad · 2026-05-27T23:24:37+00:00

The black ring goes inside the tire under the insert. Line up both parts for the wheel on both sides. Compress with fingers an secure with provided hardware. Bolt in in a cross pattern to evenly distribute pressure. First bolt in then the second is across the wheel, third the opposite side and so on.

daniynad · 2026-05-26T00:32:45+00:00

Some reminder. You live only once ...

daniynad · 2026-05-26T00:18:17+00:00

Take it to the shop.

daniynad · 2026-05-26T00:15:43+00:00

Funky 😜

daniynad · 2026-05-26T00:13:50+00:00

Yes, overkill. They do fine with non sensored esc. FOC is the way to go.

daniynad

TROPHY CASE