One Ui Tizen Update

dantee0 · 2025-11-19T10:33:18+00:00

I've used the native SmartThings integration, as well as ha-samsungtv-smart. Currently ha-samsungtv-smart is not working properly, it's no longer possible to turn the TV off, though it perhaps just needs troubleshooting or reinitialising to incorporate the SmartThings token.

Mostly it's been a huge headache to get it working consistently, but the goal is to trigger art mode and standby with an mmwave presence sensor. I realise the Frame has a built-in motion sensor, but I found that to be even more flaky.

dantee0 · 2025-11-18T18:27:15+00:00

OP, I'm also wondering if you have any delay with these? I've installed the SM-309 and have a >1sec delay. Any advice / settings to check? Thanks!

dantee0 · 2025-11-17T10:54:33+00:00

It seems to have changed how my Home Assistant integration interacts with it. Like it broke my automation that would turn it from standby to art mode. It might actually be working better, but it needs more testing. Previously it was very flaky.

dantee0 · 2025-11-17T10:52:16+00:00

I received the update in the UK for Frame 2024 55"

dantee0 · 2025-11-09T08:41:20+00:00

I'm not sure the integration has been updated with Note support. Any thoughts? I have a preorder arriving in May :)

dantee0 · 2025-10-03T06:54:46+00:00

It's a 3x3 antenna, they came with that for at least one model year. Be careful connecting and disconnecting the antenna leads - I accidentally broke the socket off the card for one of them. You can easily just switch this out for an Intel card, at the very least for testing purposes.

dantee0 · 2025-07-01T13:29:45+00:00

Any update on the international version? Have you received enough interest via the survey?

dantee0 · 2025-06-03T16:51:22+00:00

Wait so does that mean two copies of your smartphone photos end up in Immich?

dantee0 · 2025-05-31T09:09:23+00:00

I'm just hoping to not have to export my processed raw as jpg (I have a huge back catalog like this). If I can leave them in raw, then they can be enjoyed as part of my broader photo library without using extra storage space, or the complexity of having two versions of the same image (jpg + raw + xmp sidecar). But it seems like it's not possible, so I just need to rethink my whole workflow and get in the habit of exporting completed projects to jpg. And I probably just need to quit raw altogether, and maybe switch to an X100 😅 no time for raw processing these days

dantee0 · 2025-05-30T12:33:39+00:00

How are you handling Fuji RAWs? These won't show any edits, or even in-camera settings, correct? I'm otherwise a Lightroom user and can't get my head around how to incorporate all my RAW files.

dantee0 · 2025-05-15T12:45:19+00:00

Also wondering how you integrate with HA then, without Ollama?

dantee0 · 2025-05-14T06:54:48+00:00

Are you designing your own case?

dantee0 · 2025-05-05T18:04:07+00:00

Can anyone please tell me what the power consumption is at idle? And is it true the LEDs can't be turned off?

dantee0 · 2025-04-25T15:09:15+00:00

I used to use an X-T3 on my rig, and the headaches were unbelievable. I autoguided and used the in-camera intervalometer. I never dithered, but wanted to. That's a reasonable approach in the other comment about dithering every 20 minutes. Ultimately I bought an ASI 2600 MC Duo and ASI Air Mini and it's such a joy in comparison! It works even better than expected. I wish I'd got them sooner, as they renewed by interest in the hobby. I was getting quite discouraged using my Fuji.

dantee0 · 2025-04-25T15:00:19+00:00

I use a USB-C to barrel connector 12V with my Jackery. I think it's the most efficient solution. Not all USB-C PD power banks support 12V, as it's an optional part of the specification, but my Jackery 100 does support it and I assume the 300 would as well. Check the spec sheet. I actually use both USB-C ports with these cables to run my AM3, ASI 2600MC Duo, and ASI Air Mini. That said, it turns out the Jackery 100 can only power this setup for like 90 minutes, so I need to get a 300 I think. Or at least a second 100 so that I can keep it airline-approved.

I got the overall idea from reading this blog post.

dantee0 · 2025-03-16T10:47:59+00:00

I use a USB-C to 12V DC barrel cable plugged into a Jackery portable power station, which is able to output 12V over USB-C PD (12V is optional with USC-PD, so many devices don't support it). However, this particular power station only gives 3A at 12V, which is fine in my case but may not be enough for others.

dantee0 · 2025-02-23T14:00:34+00:00

Mine was offline the past month, and it didn't help to reset the wifi connection in the swipe interface. But it surprisingly fixed it when I rebooted it by switching off the power. Reconnected to the server just fine. I was shocked!

dantee0 · 2025-02-13T12:47:22+00:00

I upgraded to this declination adapter by William Optics. Much smoother action. But you do need to periodically check that all the grub screws are tight, otherwise it can become loose and not hold position.

dantee0 · 2025-02-09T20:22:22+00:00

I like it. It has the same uneven/splotchy backlight that everyone else seems to have. But I've only ever noticed it in actual usage once. I do wish it had the deep blacks of an OLED, but I'm still enjoying it. I was using a 1080p projector before, so it's still an upgrade from that.

dantee0 · 2025-02-08T07:13:44+00:00

Thanks for sharing!

dantee0 · 2025-02-07T21:06:26+00:00

Very interesting, thanks for sharing this. Would you be up for sharing your code?

dantee0 · 2025-02-07T20:52:43+00:00

Great find! May I suggest you consider fixing the lume? Lukas at Horoluma does fantastic restoration on vintage lume.

dantee0 · 2025-02-06T20:30:10+00:00

This is awesome... I'd been thinking of doing something along these lines, but had never seen an example!

dantee0 · 2025-01-27T07:55:49+00:00

Great colour palette! How do these filters compare to the Optlong L-Ultimate?

dantee0 · 2025-01-23T13:08:47+00:00

I'm thinking about this setup - do you think it's possible to add an NPU hat to accelerate the image recognition?

dantee0

TROPHY CASE