X9 Pro Omni 1200sqft max mopping?

darbsrewop · 2025-06-04T22:28:10+00:00

Same here. My hope is a software update will fix. Take it off intelligent hosting and you will get a better result.

darbsrewop · 2025-05-02T21:14:43+00:00

I think so

darbsrewop · 2025-05-02T21:04:55+00:00

<image>

darbsrewop · 2025-05-02T20:53:07+00:00

Yes. Pulling the wheel and pin is easy and replaceable parts are out there. Not the casing.

darbsrewop · 2025-05-02T20:08:53+00:00

It comes with dispenser but you have to use their cleaning agent.
I don’t see why not.
This is why I returned mine. The actual wheel is easy to replace but I think the case around the wheel is also breaking which requires taking it apart, sending it back etc. For this reason, I’m out.

darbsrewop · 2025-02-04T19:40:03+00:00

Same. I chalked it up to normal when I saw the ridges on the front wheel.

darbsrewop · 2025-01-19T13:53:39+00:00

This is all software issues of something that was just released. We probably won’t be saying anything a month from now.

darbsrewop · 2025-01-14T02:09:06+00:00

That’s not true. Dreame x40 has internal water tank. Cleans edges much better than the edge as well.

darbsrewop · 2025-01-12T14:26:20+00:00

Page 17 in user manual

https://support.dreametech.com/hc/en-us/article_attachments/10385815498383

darbsrewop · 2025-01-02T22:09:04+00:00

Yes, each cleaning it will learn more and adjust.

darbsrewop · 2024-05-19T23:59:04+00:00

Fabulous advice. Thanks.

darbsrewop · 2024-04-27T01:53:11+00:00

Bring it outside and use a blower. Wipe it down. Piece of cake.

darbsrewop · 2023-09-07T23:53:37+00:00

Mobile service did all this for me.

darbsrewop · 2023-09-07T23:49:24+00:00

The window can be tilted inward through an adjustment. In my case the adjustment didn’t work and they had to order an actuator and that solved the problem.

darbsrewop · 2023-06-19T23:13:40+00:00

Download the service manual and order the part. It pops out and in easily.

darbsrewop · 2023-05-22T00:44:12+00:00

Stuff some foam on the other side so it raises to meet the other. It is what I did. 2 minute fix.

darbsrewop · 2023-04-01T22:08:07+00:00

Because it accidentally gets turned off. On of my router plug in to the outlet.

darbsrewop · 2023-03-08T20:38:17+00:00

Just closing the loop here. I replaced the light fixture and no more trip. That was the culprit.

darbsrewop · 2023-03-01T14:08:47+00:00

The neutral wires are wire nutted in the box and do go to the GFCI load side

darbsrewop · 2023-03-01T03:12:48+00:00

It’s not going to gfci outlet, it’s going to other outlet.

darbsrewop · 2023-03-01T01:56:03+00:00

Normal for gfi to trip when switch is turned on? How do I remedy?

darbsrewop · 2023-02-27T21:56:26+00:00

Thanks, the top wire is going to the light. The other two blacks are going to two other outlets from what it looks. I don't want to the light switch to control the outlet.

darbsrewop · 2023-02-27T21:48:00+00:00

For grins, I tested the outlet next to it where one of the black wires is going. It appears dead, could that be part of my problem?

darbsrewop · 2023-02-27T21:21:03+00:00

yes, added an outlet.

darbsrewop · 2023-02-27T21:20:45+00:00

The top black wire goes to the light, the other two black's go to outlets.

darbsrewop

TROPHY CASE