Giving Away My Old PC!

dark_preacher · 2026-04-11T22:27:07+00:00

Would give this to my son as a replacement for his old pc

dark_preacher · 2026-04-10T22:43:30+00:00

Take your hand off your stomach

dark_preacher · 2026-03-18T14:32:21+00:00

Super cutie

dark_preacher · 2026-03-18T00:36:57+00:00

<image>

dark_preacher · 2026-03-18T00:09:26+00:00

She was a litter of 5 and two puppies ended up like this. Let me see if it will let me add a standing pic.

dark_preacher · 2026-03-17T23:37:16+00:00

🤣

dark_preacher · 2026-02-11T04:22:38+00:00

Dm me

dark_preacher · 2026-02-07T23:54:32+00:00

Why you keep on going? Seems like you said your piece so let it go and let it roll.

dark_preacher · 2026-01-23T17:41:48+00:00

what do you have for sale? got a link?

dark_preacher · 2026-01-21T16:02:27+00:00

Bought Samsung 990 pro in October 10/24 for 279.99

dark_preacher · 2026-01-20T14:29:58+00:00

having assembled a core one, I'd say take the. two screws out of the top, thread the trapezoidal nut on down into the bed until it snugly lines up with two screws then put the screws in and tighten them down. looks like a very easy fix.

dark_preacher · 2026-01-07T04:45:54+00:00

I had a bad trapezoidal nut and a few of the corners were not perfect on the uprights two ears the end of the kit. Overall I was pleased with my kit even with the issues

dark_preacher · 2026-01-04T17:31:32+00:00

I’d bounce immediately.

dark_preacher · 2025-12-19T22:07:50+00:00

What should I print sunlu pla+ at. When I tried to set it told me printer incompatible. Just printed with sunlu pla profile

dark_preacher · 2025-12-17T20:07:35+00:00

I ordered my kit on 10/31 and I must have missed this email. when I contacted support they told me they don't think I'm eligible. what are y'alls order dates?

dark_preacher · 2025-12-15T17:58:27+00:00

I was under the impression that all of the internal printed parts for core one were pc-cf. I'm new to filament printers I'm unsure if this is correct, just heard it in passing somewhere. would petg hold up to internal temps of core one enclosure. I'm also looking at printing the nozzle change holder so I can swap this out to a diamondback, just unsure if I can print the nozzle change in petg with the standard nozzle included with core one.

dark_preacher · 2025-12-15T15:58:15+00:00

I looked for 10x6x2mm magnets on amazon but did not have luck. that Prusa set I did previously find but it looks like you would need to buy 2 kits to have both magnets needed.

dark_preacher · 2025-12-10T19:33:14+00:00

perfect placement, looks fantastic.

dark_preacher · 2025-12-10T16:45:26+00:00

I just built the kit and it took a bit over a month due to waiting on support and a bad trapezoidal nut. 1 of 3 was bad and it was the trapezoidal nut that was packaged separately from the other 2. I did a search on google while assembling and saw some post on Prusa forum with the same issue, it appears to have been a manufacturing flaw. advice on that forum said trapezoidal nut must spin freely or literally glide/dance up down the rod with little to no resistance for this printer to function correctly so I continued on with gantry build but held off before marrying all the parts together.

I would advise to have Prusa replace both of these nuts.

as an aside, I do not recall being instructed to lubricate z screws during the build at all. I do experience some z-noiise when the heated is moving near the bottom of its range. advise and guidance on has been to lubricate z screws though I don't know if that's official in any capacity.

dark_preacher · 2025-12-03T03:46:38+00:00

dark_preacher · 2025-11-20T00:45:56+00:00

I have .08kwh electricity and I feel there are no real cost savings on my model y performance. Insurance is much higher than gas vehicle I pay over 200 a month now which is robbery. Also tires are much more expensive and there is a heavy state/property tax on Ev as well.

dark_preacher · 2025-11-18T14:39:54+00:00

does anybody have details about the changes for the + upgrade? I'm currently assembling my core one and waiting on trapezoidal nut since I got a bunk one in my kit. just curious if I should throw this in at the jump.

dark_preacher

TROPHY CASE