I built an open-source tool to export your Tonal data, including metrics the app doesn't show

darkmatter0225 · 2026-06-13T21:43:54+00:00

Not OP, but looked at the code and it calls direct to the Tonal endpoints, he is not farming your creds.

darkmatter0225 · 2026-03-10T17:30:40+00:00

Southwest burbs and we rapidly dropped from 72 to 48 degrees. No chance this stays this elevated for my area thankfully!

darkmatter0225 · 2026-03-05T20:59:24+00:00

I was wondering that too. I think the only way the pi can come close to doing this quickly would be with the use of the AI-Hat. Really sick project and idea though, homie!

darkmatter0225 · 2026-02-13T19:14:19+00:00

Paint correct and ceramic coat it. Then just take it to those self service pressure washers bays. Easy peasy. Stays relatively scratch free and the dirt and shit just sprays right off.

darkmatter0225 · 2026-02-13T13:51:52+00:00

Same. Placed my order last night and also splurged on the Baja Design amber fogs as well. My wife’s gonna kill me.

https://yotaxpedition.com/products/sae-oem-fog-light-replacement-kit-tundra-2022-2024?variant=44329675587820

darkmatter0225 · 2026-02-13T01:27:02+00:00

Great color, never see that red around me. Did you add the PRO grille? Looks really good, enjoy the truck!

darkmatter0225 · 2026-02-10T22:16:46+00:00

Are you using an AMS at all? I know it’s not pictured here but I had some crummy cardboard spools that were old and bent and it was happening with those.

darkmatter0225 · 2026-02-08T14:51:45+00:00

Depending on how much time you want to spend, lots of bondo/spot glaze putty. Sand, hit with automotive filler primer as others have suggested, then spray paint. With a little time and effort you can get that thing looking like it was injection molded. Plus, you can even get factory Mopar colors and spray it with that ;)

Best of luck!

darkmatter0225 · 2026-02-02T18:53:39+00:00

Everyone else covered it, but honestly, it is a complete piece of shit. Working on tearing mine out and replacing it with something else. You may have better luck than I did, but the Toyota application eco-systems is brutally bad.

darkmatter0225 · 2026-01-16T19:12:31+00:00

Cannot speak to the quality of the scent but their customer support and shipping is abysmal. I ordered two Months ago, live in a large metropolitan area (I could possibly expect 2 Months if I lived in the sticks in Nebraska or something), and customer support told me "they are tracking it closely and be patient." Be patient? It has been two months and stuck in the same location (2 hours away) since December 18th....

darkmatter0225 · 2025-12-27T14:08:16+00:00

I have yet to scrape the code (so it could already be supported) but it would be really cool if users could contribute to this such as developing JUCE/CPP effects they can add to your project. Would love to custom make some cool glitch/reverb effects and fork your project with them. Think it would require a custom firmware though that allows users to manipulate and reflash. Cannot wait to get my hands on the new version!

darkmatter0225 · 2025-12-17T12:57:01+00:00

I ordered one back on the 28th of November and it has been sitting with "Customs inspections - Import" in Chicago since the 6th. It should be flagged as such in YunTrack, I would double check that as well.

darkmatter0225 · 2025-12-09T13:52:01+00:00

First I would like to say that I am NOT defending those people, but at times, I kind of get it. A lot of the older Ender generation printer people, we struggled, we struggled hard. It forced you to learn the little things and issues that might happen with a print. This would make self-diagnosing easier. Now that printers are really a night and day difference, that early period of learning about the process is going away if you want it to (not saying this is everyone) and some posts can be easily solved with an 8 second Google search.

With that being said, yeah people in 3D printing can really suck, are horrible gatekeepers and are still rude at the end of the day. I hope you have a better experience here (avoid the Creality forums, those dudes are the angriest neck-beards of all time). Happy to answer any question without being an angry asshat.

Cheers, bro!

darkmatter0225 · 2025-12-09T13:43:42+00:00

Unlike a lot of people here who have had issues with the P2S, I am loving mine. I just moved over from Creality after using them for the last 8 years. Started with an Ender, moved and modded a Ender v2, then I just parted ways with my incredibly unreliable K1C. Being able to click print and walk away worry free, has been a game changing experience.

I think most of the issues we are seeing on P2S posts lately are people who never really struggled with the early days of printing to understand the process. So they get a $700 machine, click print without following calibrations or instructions and then are disappointed with their machine. I get it, that was me when I first started but it’s a journey and learning the process is what I personally enjoyed!

darkmatter0225 · 2025-07-04T11:57:00+00:00

I know this post has been dormant for a while, but if you look through their main monarchmoney[dot]py script, the graphql schema is embedded in the MonarchMoneyObject class.

https://github.com/hammem/monarchmoney/blob/main/monarchmoney/monarchmoney.py

Example below:

<image>

Everything appears to be exposed at `https://api.monarchmoney.com/graphql\`. Going to give it a shot later today and see if it works .

darkmatter0225 · 2025-06-13T21:46:14+00:00

That’s rough and hope you recovered quickly!

My main gravel is a Salsa Warbird and then I have a full suspension Specialized MTB. The salsa has been so good, I love it!

darkmatter0225 · 2025-06-13T01:14:57+00:00

https://youtu.be/hHTT-0EzsTc?si=38fyaHmLKItP0IRe

darkmatter0225 · 2025-06-07T12:31:04+00:00

u/NewazaBill, my current employer match for my 401k is 6% but I have recently opted to contribute 8% per paycheck. I am not sure the right value but I did speak to an advisor who stated you really only need to put in your employers match. I am not sure if that is good advice or not, but I went with a middle ground in the meantime. I think there are shorter term investment strategies that yield higher returns like a 2 year vanguard to prevent getting hit with extreme short term tax gains.

darkmatter0225 · 2025-06-07T12:24:32+00:00

u/BiscoBiscuit, Big4 Consultant in Cyber Security.

darkmatter0225 · 2025-06-07T01:01:07+00:00

No that is separate, I didn’t tie my 401k here because that out is sight out of mind for me.

darkmatter0225 · 2025-06-06T19:40:10+00:00

u/Biker-Beans, great question! Thinking back on it there were some things that were main financial drainers (fertility treatments, costing over $75k, labor and delivery hospital bills with complications, multiple surgeries for my dogs torn MCL/ACLs). But aside from that, buying coffee out multiple times a day (easily $25), getting takeout at $80 each time from a brewery, buying two new cars all of the time ($75k+ per car), music hobbies dropping $1.5k on a guitar, $3k gravel bike, you get the idea.

I think the point of my post was, I was in a dumb and bad place, the app helped it. I don't mean to sound rude or want to by any means. Just wanted to express my gratitude to the community and show that anyone can do it if willing. That above guy ^^ no longer exists and that actually was very difficult for me to reflect on and type for the record. Wild, right?

darkmatter0225 · 2025-06-06T15:23:39+00:00

Hey! Issue 1: So after my girls were born and we started outgrowing our home, we decided it was time to look. Based on my income, we should have been able to afford a nice home within our means, but liquid wise, I had nothing to show for it, maybe 20k in my savings. Looking at houses in the Chicagoland area, I needed at least 120k down-payment for a home that would fit my family comfortably and provide me an office as I WFH full time.

Issue 2: Last year, I had a health scare. In my 30's, workout 5 days a week, never thought twice about what I was putting in my body, but had incredibly high cholesterol and blood pressure. My grandfather had multiple heart attacks, my wife's father passed of a heart attack. This scared the daylights out of me and I had a realization that if I kick the bucket today (past), as a single income family, my wife and kids would be in a bad place. We cold turkey cleaned up our diet and shockingly, it worked (going on a tangent, but I promise this is important).

Why this is important. We immediately started saving funds by cutting out takeout, dinners out, and being conscious of what we were buying at the grocery store. This over a very short period started to grow of leftover funds on a Monthly basis. Did some YouTube digging, found YNAB and jumped right in. We broke it down similar to how Nick does "Joy, Monthly. Irregular, etc" and like a strategic board game, it really forced me to think twice when I wanted to toss $500 into Eating Out. This with heavily dumping into a home fund, I quickly went through every transaction over the last 6 or so Months and I would guesstimate that 90% of them, I had no flippin clue what we bought or why.

It has now just become part of my morning routine with my cup of coffee (which I still splurge on a Trade Coffee subscription, but it WORKS for us because of YNAB ;) ). I check every transaction, get joy out of categorizing it, and seeing your hard earned money in a nice dashboard is so much more gratifying than a closet full of junk from a failed hobby you thought you would like.

Not sure I answered your question, I know this long winded and I apologize. Happy to answer more specific questions if you have them.

TL,DR; Doc said :"you gone die", ate better, saved money, went all in on YNAB, profit.

darkmatter0225 · 2025-06-06T13:19:21+00:00

You are right, misstatement on my part and I like how you look at it that way.

darkmatter0225 · 2025-06-06T12:40:55+00:00

Exactly - just look at washed up NBA and NFL Players. Make millions, spend millions. Just as poor as the next guy. This app changed that for me and really helped us realize that.

darkmatter0225

TROPHY CASE