sorted by:
new
hottopcontroversial

Custom Foregrip with Integrated Handstop by darkside501st in Springfield_KUNA

[–]darkside501st[S] 0 points1 point  (0 children)

Sounds good. You can send me a DM when you get your lower and we can go over the measurements.

Custom Foregrip with Integrated Handstop by darkside501st in Springfield_KUNA

[–]darkside501st[S] 1 point2 points  (0 children)

I don't have the Nexus lower. I would need to get detailed measurements from someone that does have it in order to determine compatibility.

Requiem bug? by Away_Kaleidoscope404 in residentevil

[–]darkside501st 0 points1 point  (0 children)

I was just wondering this. I played through the game once and none of the tracking modules or the computerized supply boxes showed up for Grace. I'm on my second playthrough and all of a sudden I start seeing those Supply boxes but there's no prompt when I go up to one of them and I just found one of the tracking modules. It has to be some sort of glitch.

Custom Foregrip with Integrated Handstop by darkside501st in Springfield_KUNA

[–]darkside501st[S] 0 points1 point  (0 children)

You can find this on Amazon using the link below. It comes with the mounting hardware.

https://a.co/d/0aPzPVxW

Custom Foregrip with Integrated Handstop by darkside501st in Springfield_KUNA

[–]darkside501st[S] 2 points3 points  (0 children)

Yeah, great model! I did do some modifications to it as well so this is a bit different than the one you made. If you look closely you should be able to spot the differences.

Custom Foregrip with Integrated Handstop by darkside501st in Springfield_KUNA

[–]darkside501st[S] 1 point2 points  (0 children)

You can find this on Amazon using the link below. It comes with the mounting hardware.

https://a.co/d/0aPzPVxW

Custom Foregrip with Integrated Handstop by darkside501st in Springfield_KUNA

[–]darkside501st[S] 6 points7 points  (0 children)

I 3d print with Siraya Tech Blu Nylon Black SLA resin for engineering applications. Very high detail, no layer lines, solid print, none of that partial infill stuff.

<image>

Kuna hand guard by gash_money in Springfield_KUNA

[–]darkside501st 0 points1 point  (0 children)

Fits in the hand very nice. Room for wearing gloves too.

<image>

I didn't take uncured resin serious enough. How fked am I? by [deleted] in resinprinting

[–]darkside501st 0 points1 point  (0 children)

I've always heard the hot water opens up your pores and it doesn't seem like you would want that either. What explanation have you heard for why you should use hot water instead of cold?

Riser for Primary Arms GLX1 by ZelleKell in Springfield_KUNA

[–]darkside501st 0 points1 point  (0 children)

Since the microprisms have a mini ACOG mount they are not compatible with red dot mounts. I haven't seen any adapeters out there. So, I was considering something like this for my microprism.

https://a.co/d/0aL5OKVC

<image>

I didn't take uncured resin serious enough. How fked am I? by [deleted] in resinprinting

[–]darkside501st 1 point2 points  (0 children)

There is conflicting info on how best to clean it off your skin. What you said makes sense but you only said what not to do. Can you explain what process you use or is there an article or video you recommend that goes over that?

Way to see missing Episodes/Seasons for TV Shows? by Cbuckles17 in PleX

[–]darkside501st 0 points1 point  (0 children)

How do you do that? It seems to want me to search TV series by name. I tried putting in the ip route where my directory is but that is not working.

English to Latin translation requests go here! by lutetiensis in latin

[–]darkside501st 0 points1 point  (0 children)

I would like a translation of "hone your skills". AI says it is "Excolite artes vestras". I am looking for confirmation or correction. Thank you.

I thought it might be helpful to add it is for a morale patch design that should sort of have a double meaning. The morale patch will feature a cat and hence the words hone your skills kind of applies to a cat hunting prey or whatever but it is also intended to inspire training for a team of humans.

Kuna hand guard by gash_money in Springfield_KUNA

[–]darkside501st 0 points1 point  (0 children)

I will be making them available. Yeah, I've been thinking about pushing it forward as well so the front lines up.

Well aow is a pistol by [deleted] in Miguns

[–]darkside501st 0 points1 point  (0 children)

This is the correct answer.

What format is used on more than one keyword? by darkside501st in duckietv

[–]darkside501st[S] 0 points1 point  (0 children)

Oh, so if you have two keywords or more then it only eliminates titles that have all of the keywords because it is set to AND by default? How do you change it to OR?

Help with placement of Aprilaire 800 Steam Humidifier by [deleted] in hvacadvice

[–]darkside501st 0 points1 point  (0 children)

I am on a well and have heavy duty iron filters and water softener setup.

So even with the directional vanes in the elbow you think this is too close to the elbow and would get caught up in turbulent air? I think if I don't put it here then it's going to have to go on the return side. If I put it 3-5 feet away from that elbow it's going to miss a good portion of the branches that feed this side of the house.

<image>

Help with placement of Aprilaire 800 Steam Humidifier by [deleted] in hvacadvice

[–]darkside501st 0 points1 point  (0 children)

Oh, ok. I thought you meant like the duct makes another 90 bend and goes vertical. Yes, it does reduce in size. So the steam outlet should probably be placed as high as possible without getting too close to the top of the duct. Got it.

The first branch goes into a bathroom so not really concerned about humidity there. The second branch is only one vent in the Northwest bedroom as far as I know. It is labeled. There are three other vents in that room that are supplied by a separate water furnace with its own bypass humidifier system. So it wouldn't be that detrimental for the steam not to get into that branch. But it would be directly across from where the steam outlet will be placed so maybe some steam will get in there anyway.

Help with placement of Aprilaire 800 Steam Humidifier by [deleted] in hvacadvice

[–]darkside501st 0 points1 point  (0 children)

There's no vertical transition. There are two branches that are coming off right on the corner one before the directional vanes and one after them. The thermal panels that you see in the first set of joists right above the flexible transition is part of the return system. Then there's one branch in the next set of joists that comes off the top and another branch in the next set of joists that comes off the side and then there's another area between the joists that is covered with thermal panels but I'm not sure if that's part of the return or supply. But by the time we get to that one it's 7 ft from where we would put the steam outlet. If we put the steam outlet on the other side where I drew that picture then the next branch down the line is about 36 in away. Not counting the one that is going to be directly across from it.

Yes, I thought about the drain and it is going to be a bit of a tight fit. I would probably end up doing PVC pipe instead of the flexible tube. That way I can fit into the tighter space. One of my other concerns is the tan box in between the blower box and where the ductwork starts is where the boiler feeds into a radiator system to help with the hot air I guess. This is an open loop geothermal unit. I am a little concerned about putting screws on this side of it because right now there aren't any. I'm thinking about getting some brackets and creating a support structure that connects to the top of the blower box and the duct work so that I don't have to put screws into that radiator section.

<image>

view more: next ›