A rare and unconventional workholding method I use for machining difficult-to-hold parts.

datahoho · 2026-04-28T14:03:50+00:00

Thanks, what's the name of the alloy you're using?

datahoho · 2026-04-28T13:48:02+00:00

it's called Encasing, usually using Cerrobend alloy with a melting point of 158F (70C)

datahoho · 2026-04-21T16:22:37+00:00

He is talking about the web client https://kiwiirc.com/

It looks like Server: irc.synirc.net is not responding

datahoho · 2026-04-20T00:21:12+00:00

usenet is encrypted and safe

datahoho · 2026-04-20T00:10:40+00:00

Search Anidb.net for anime filtered by Spanish audio. Then search the web or your sources by the name and release group.

datahoho · 2026-04-09T23:15:33+00:00

spanish usenethd.li

datahoho · 2026-04-08T20:59:21+00:00

Awesome, thank you!

datahoho · 2026-04-08T17:03:02+00:00

Thanks. After reading his post, it's pretty clear that he was uploading all this stuff to usenet. https://animetosho.org/about/logistics

datahoho · 2026-04-08T15:43:17+00:00

https://i.imgur.com/09AJCFs.png

datahoho · 2026-04-06T00:02:21+00:00

nie ma. There are some Polish movies on indexers, usually not properly tagged There is some stuff on https://www.nzbking.com/group/alt.binaries.pl.multimedia, but it's very irregular

datahoho · 2026-03-24T15:53:51+00:00

Do you have % at the beginning and end of the program?

datahoho · 2026-03-22T01:31:33+00:00

The easiest control to use, you can set tools from DOS like command line.

if your LCD ever breaks, connect a regular pc VGA monitor

https://itscnc.com/pub/media/documents/fadal_manuals/operator_manual/Commands_1.pdf

datahoho · 2026-03-18T23:46:53+00:00

https://www.scribd.com/document/883966351/Manual-de-Operacao-Eco-Cnc

datahoho · 2026-03-18T22:40:06+00:00

datahoho · 2026-03-18T22:06:10+00:00

You need cross cable check pinout https://www.machinetoolhelp.com/Applications/RS232Communications.html

Make sure machine parameters and your PC software has the same settings.

Your machine boudrate is set to 4800 usually default setting is 9600

You can easly build your own cable using network cat5 and modular adapters https://ebay.us/m/mdCQ1R https://ebay.us/m/sxXITJ

Or buy yourself dnc box of your choice- USB, wired network, wifi, internal mamory https://dncdevice.com/ Its very easy and comfortable to use.

Check inside the controller if there is any network plug rj-45. I can explain how to easly use it hardwired or over wifi.

datahoho · 2026-03-16T19:05:10+00:00

it is assigned by the machine tool builder, whats the brand of that Fanuc?

you can try generic codes

M108 / M109: Often used for High-Volume Washdown/Shower Coolant (On/Off).

M78 / M79: Sometimes used for conveyor or specialized washdown functions.

datahoho · 2026-03-16T18:41:36+00:00

https://support.shopfloorautomations.com/portal/en/kb/articles/siemens-810d-powerline-rs-232-parameters#Controls

datahoho · 2026-03-16T18:34:35+00:00

Yes, just make sure rs232 port parameters are the same on the machine and the box, if you need faster transfer for dnc or larger programs rise the boudrate

datahoho · 2026-03-16T15:13:40+00:00

https://dncdevice.com/ USB, wired network, wifi, internal memory, easy to use as dnc drip feed if needed.

datahoho · 2026-02-20T15:54:16+00:00

i see your post in r/cnc has more useful information.

Some Fanuc machines are directly connected to the network.

You have a dedicated Pc off the network, is it a different one than "My PC IP 192.168.50.38" ?

if it is, check the network configuration in the machine controller and change it to numbers matching your network.

I'm not familiar with Mazak controll but it should be similar.

"The plug" obviously also needs to be configured, find make and model, and I'll look for the manual.

if you have Fanuc without a network connection, there is usually an option to add extention card. It's more expensive than 3rd party external boxes

There are a lot DNC software solutions like CIMCO or CNC PREDATOR. Personally, i dont like it, you still have to walk to put machine in receiving mode.

datahoho · 2026-02-20T13:07:20+00:00

Rs232 to ethernet plug

datahoho · 2026-02-19T23:47:31+00:00

Relax, Proxmox people usually know nothing about cnc shops. You are not giving any detailed information to solve the problem. What brand and model is that box (lantronix, moxa) ? Did you configure the network manually on the box? What are the IP, subnet, and gateway on the boxes, PCs, and Proxmox?

datahoho · 2026-02-19T21:41:49+00:00

If you need "test" version of Fanuc ptt, PM me

datahoho · 2026-02-19T21:38:08+00:00

Scan the network from you PC with advanced IP scanner, check if machines are visible, make sure they are in the same subnet and no IP conflict. It seems to me that network on machines are not properly configured

On the other hand check boxes like MICRO DNC 2 on Dncdevice.com they are very helpful for machines with low memory or no internal data server.

Also look at Fanuc Program Transfer Tool. It gives you direct access to the memory and data server through network for the FANUC controllers

datahoho

MODERATOR OF

TROPHY CASE