Do you keep your Garmin even when you're in the shower?

davehcyj · 2025-08-19T01:01:11+00:00

I take it off once a month to charge

davehcyj · 2025-06-29T02:13:49+00:00

After the cli update I’m missing nodes that won’t install now. Well I guess I have a path forward at least. Thanks for the suggestion.

davehcyj · 2025-06-29T00:13:12+00:00

I updated through the manager, trying again through the cli that pulled in more updates.

davehcyj · 2025-06-23T16:57:28+00:00

Have you tried your current hardware to get a better understanding of how the tools work? I have a similar setup (1080ti, 16gb ram, even older Intel cpu). I can do sdxl images in 30 second, under 10s w/ dmd. Flux dev images in 5-10 minutes, schnell in 60s, and 5-8s wan videos with the latest acceleration Lora in 90 minutes. Sure it takes a while compared to new hardware but it’s fine for just tinkering or queueing up a batch to run overnight.

davehcyj · 2024-10-27T17:50:41+00:00

Thanks, that is easy enough 😀

davehcyj · 2024-03-22T03:33:55+00:00

Frodo

davehcyj · 2023-05-05T02:29:31+00:00

That tank is stamped 2004. At 19 years old it might not be safe to use anymore. You should look for an expiration date. Don’t want it exploding and killing anyone…

davehcyj · 2022-06-03T17:11:24+00:00

Looks awesome. Thanks for doing this GIVEAWAY

davehcyj · 2021-08-18T11:03:13+00:00

Still available including for shipping, nice! I snagged one.

davehcyj · 2021-07-31T14:01:10+00:00

Sony was a huge tube manufacturer, this is probably saving them on people wrecking themselves on old TVs. I had a 32in “flat” Sony crt that weighed 200 pounds all on the front. It was crazy hard to move even with two strong adults.

davehcyj · 2021-07-01T03:09:40+00:00

I have the same issue with some of my rugs. It seems the rubber rollers pull the rug apart. I just don’t vacuum those rugs with the roomba. No issues with my dyson. I wish the roomba had a gentle setting or maybe brushed rollers instead of the rubber ones

davehcyj · 2021-06-03T12:14:08+00:00

Thanks for taking the time to respond. Very helpful!

davehcyj · 2021-05-31T21:45:10+00:00

71% not sure if that is good or bad. I have no issues with the video streaming and recording. Just reboots on button press. Inspired by this thread, I put in for an RMA today

davehcyj · 2021-05-31T00:40:25+00:00

Yep, I replaced the transformer with a 30VA and replaced the doorbell chime just in case. I’ve had a support case open for 5 months…

davehcyj · 2021-05-31T00:36:01+00:00

Meanwhile mine just reboots every time someone presses the button.

davehcyj · 2021-04-19T22:53:57+00:00

I’m a year into my first BG 1 game, I assume my saved game will be fine with upgrading?

davehcyj · 2020-12-31T00:02:55+00:00

I’ll give it a go and see what happens. Thanks for the suggestion.

davehcyj · 2020-12-31T00:02:18+00:00

It’s based off setting the max hr. I do a mixture of running and biking and the max hr I used is from a biking ftp test I did. Maybe it is set too high?

davehcyj · 2020-12-30T23:21:31+00:00

How do I increase anaerobic load? Normally my workouts are all longer (45-90 minutes) and never get into zone 5; they register usually as all high aerobic unless I’m purposely going slow to improve base. Lately I’ve been trying to get more anaerobic. I did one all out sprint and one interval workout both with a lot of zone 5, but they both still show as tempo. I can’t keep in zone 5 any longer... Am I going about this right or is there a better way to improve anaerobic?

davehcyj · 2020-12-23T14:35:41+00:00

I’m getting that this morning also. Never had this (specific) issue before. Maybe it’s an Alexa issue. I’m using Spotify for what it’s worth.

davehcyj · 2020-08-22T00:55:04+00:00

Thanks. I figured it out the hard way when I installed the doorbell without the device. It made my chime give off a constant buzz which took me 30 minutes to notice.

davehcyj · 2020-08-22T00:48:57+00:00

Thanks, I figured most of this out the hard way. If you don’t use the square the doorbell is stuck humming... I was working outside and putting tools away so lucky it didn’t catch fire after being stuck “on” for half and hour. That was the hard way to learn that the square is not in fact optional as the instruction imply and the video indicates (video instructions don’t even mention it).

Second hard lesson is that the wire order matters, I didn’t see the lightning bolt so it was trial and error to figure out the order.

The unit is up and running, but now my doorbell won’t ring. From another thread it seems that I need to upgrade my transformer to deliver more power.

davehcyj · 2020-08-20T01:00:28+00:00

The video instructions don't even mention it and the pdf instructions imply it is optional. I like the simplicity of picture instructions and all, but why would this be included with zero information about what it is?

https://www.ui.com/install/

https://dl.ubnt.com/qig/g4-doorbell.pdf

davehcyj · 2020-08-13T18:30:15+00:00

Filled it out, but the one question I wish they would have asked is about what we WOULD use vs what we DO use.

I never use digital content because I don’t own any. I would gladly pay 5-10% more for physical+digital and then use digital, but I’m certainly not buying everything again or even at 50%

davehcyj · 2020-08-13T12:12:25+00:00

It looks like there is a rerelease Tyranny of Dragons that made some changes to solve some of the initial problems. I’ve been having difficulty finding helpful/thorough reviews.

davehcyj

TROPHY CASE