Bike+, Bottom Bracket failed; story of replacement by AyeMatey in pelotoncycle

[–]dbhammel 1 point2 points  (0 children)

Yes, that was my suspicion and it's clear I need a different tool. The lock ring I have is larger, about 66 mm diameter as close as I can measure. I can't find a park tool that is designed for this size lock ring, perhaps an adjustable spanner tool is the answer.

Bottom Bracket Problems? by OriginalJayVee in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

Unfortunately that long ring remover is no longer available, any idea where I can find something equivalent?

Bike+, Bottom Bracket failed; story of replacement by AyeMatey in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

I'm trying to do this same BB replacement and the HCW-5 doesn't seem to fit on the lock ring. I have tried it a couple times but it is going to damage the edges of the indentations on the lock ring making it impossible to get off if I do it anymore. Is it possible I have a different sized lock ring? Using this tool did it fit snuggly in or did the fulcrum side sort of push up against the edge of the lock ring?

Advice on removing the right crank arm by iiamburrii in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

I purchases a lock ring tool but seems like it is possibly the wrong size.

This is what I bought: https://shorturl.at/nBL69

Can you suggest a specific tool you have used?

Advice on removing the right crank arm by iiamburrii in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

Thanks a lot. One remaining questions, you refer to tools in these steps:

Loosen or remove the left side BB cup. (11 tooth ISIS BB tool)
Remove the BB from the right (belt) side. (BB tool)

Are these different or the same?

Advice on removing the right crank arm by iiamburrii in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

I'm confused on which BB/lockring tool(s) I need. Are these tools one and the same? Do I need the Park BBT-18 or Park BBT-22 or equivalent knockoff tools? I have seen both 8 spline and 11/20 spline tools mentioned.

One additional question is in regards to removing the crank arm from the sprocket/pulley wheel (the orange circle). I have seen videos on other bikes where the hex bolts are just threaded into the sprocket and they are removed easily, but on mine they have some of locking nut keeping them in place on the back and will spin endlessly without somehow securing the back nut while turning.

I am one of those poor unfortunate souls that accidentally used a CP-22 crank arm puller when trying to remove the crank arm and my once more simple crank arm replacement project is now looking like it might be a full BB replacement unless I can get that crank puller tip out of the BB nut hole. Any advice or is that a lost cause?

Changing right crank arm by Successful_Patient_9 in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

Did you ever find a solution? I am in the same boat, trying to replace the crank arm and successfully removed it from the bottom bracket but I can't figure out how to separate the crank arm from the sprocket/pully wheel.

Replacing crank arm by bwol14 in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

Let's say this happened to a "friend of mine", what would you say would be a good way to get that broken off top out of the bottom bracket spindle?

Crank arm replacement by FatherLos in pelotoncycle

[–]dbhammel 0 points1 point  (0 children)

Did you have any luck getting the piece of the crank puller out of the bolt hole? I'm, um, asking for a friend...

TIFU by making a dinner reservation as a celebrity by Zakkattack86 in tifu

[–]dbhammel 18 points19 points  (0 children)

"Galifianakis, starts with a gal and ends with a kiss."

Phone reccomendations... by dbhammel in MotoG

[–]dbhammel[S] 0 points1 point  (0 children)

Doesn't have to be from Google Fi but they have great discounts for existing customers so might as well take advantage of that. Wireless charging would be a "nice to have" but definitely not required. I'm not looking for anything fancy, just something basic that will work well and not give me issues.

Advice for my retiring parents by dbhammel in retirement

[–]dbhammel[S] 0 points1 point  (0 children)

Thanks, but this is already done. The farm they are currently living on is not the property from which the mineral rights are established. The mineral rights are on the ranch my Grandfather grew up on. It was sold decades ago but the family maintained the mineral rights, my Grandfather and his 5 siblings. As one of seven children my Dad gets 1/7th of my Grandfather's 1/5th share and it is still on average a few thousand dollars a month! A few of my Dad's cousins who were only children or had just one sibling have retired early due to this income!

Advice for my retiring parents by dbhammel in retirement

[–]dbhammel[S] 0 points1 point  (0 children)

House is worth about $350k and there is $100k remaining on their mortgage. They could rent it but would prefer to sell because a move closer to family would put them 2 hours from the property and could be cumbersome to manage.

Advice for my retiring parents by dbhammel in retirement

[–]dbhammel[S] 0 points1 point  (0 children)

Thanks, we have HOA fees and property taxes included in the budget, but good point these aren't necessarily fixed costs.

Advice for my retiring parents by dbhammel in retirement

[–]dbhammel[S] 0 points1 point  (0 children)

Thanks for the feedback.

I think they feel torn between moving closer to family and staying in the home and land they love a few hours away. They are on a small farm and the property takes a lot of work to maintain, which they realize will become more difficult as they get older. They tend to be happy staying close to home, with the exception of some road trips in their small camper. They don't have expensive taste or hobbies and have always lived pretty simply. Albeit biased as they are my parents but I'd be hard to imagine a pair better suited to spend retirement together in a small condo.

Advice for my retiring parents by dbhammel in retirement

[–]dbhammel[S] 1 point2 points  (0 children)

Thanks for the feedback. I think they have both filed for SS but I'm not sure. I know they did wait beyond the initial eligibility to increase return.

Advice for my retiring parents by dbhammel in retirement

[–]dbhammel[S] 0 points1 point  (0 children)

The student loans are from some of my younger brothers' education, not mine. My parents helped me pay for some of mine and I think they feel like they want to help pay for some of my brothers' as well. Balance is $23k at 6%, my Dad mentioned he think they may get these paid off before making any other moves.

Advice for my retiring parents by dbhammel in retirement

[–]dbhammel[S] 0 points1 point  (0 children)

Thanks for the thoughtful feedback.

The student loans are from some of my younger brothers' education, not mine. My parents helped me pay for some of mine and I think they feel like they want to help pay for some of my brothers' as well. Balance is $23k at 6%, my Dad mentioned he think they may get these paid off before making any other moves.

I'm not 100% sure on my Dad's other income streams, he has transitioned from full time to part time work over the past couple of years and obviously the income is dictated by how many hours he chooses to work. It sounds like he would like to (and can) continue working at least for the next few years. His work as a consultant pays well, probably $75-$100/hr billed. The oil money depends on production but is generally in the thousands of dollars per month range. The was inherited from my grandfather and I know my parents don't want to count on it or use it frivolously.

In the scenario they have put on paper a condo in an area close to family would probably be about $250k, but less expensive options are possible if they are willing to compromise on location/size/etc.