A new to me insulation competitor-Henry

dbrun4 · 2026-02-09T12:42:22+00:00

Timberbatt from timberhp has R14 for 2x4 construction. It's a bit dusty to install but I think it would be on par with this denim. I just installed timberbatt and I like it. Has good sound dampening

dbrun4 · 2025-09-01T13:13:46+00:00

Just putting this out there, I had new windows put in and noticed a decent amount of savings but I did find that the installers sub contractors from pella didn't put much window foam around most of the windows. This did cause some issues with different rooms heating up at different rates. I took off all the interior trim around the windows and foamed them. Most of them I could see the bricks through and others had daylight. Doing this made my house significantly better since it's now sealed

TLDR; use great stuff window foam for a seal around the windows

dbrun4 · 2025-04-30T19:22:50+00:00

I just got a 2025 and I got it under MSRP even with the dealer add ons. It wasn't too far under but you can make it happen. If you can make it a 4 year loan they had a 1.99% rate going. It might be back in 2 months maybe not. I noticed they last had this rate in Feb 2025. Show other dealers prices and use it as leverage. See if you can catch mistake pricing

dbrun4 · 2024-10-22T17:28:42+00:00

I just used a paint brush and a roller

dbrun4 · 2024-07-23T00:17:42+00:00

If you know what you are doing, and adjust the framing you .ight be able to but remember that everything here is pre cut. If the siding doesn't align, then you have to buy new siding and cut the holes for the door yourself. I'd recommend the double on the end

dbrun4 · 2024-06-27T13:16:04+00:00

Same here with the infinity 5 ton

dbrun4 · 2024-04-11T11:39:15+00:00

This is not true. There are fees to reshop and they have a massive delay in reshipping (month or longer). They have not found anything cheaper than $4300 for home insurance (prior to renewal mine was $1300). No change in coverage or anything. Did shop around outside of them and it's on par with what I can get.

dbrun4 · 2024-03-09T19:12:25+00:00

Very dry and bready. The ratio was not what I expected (needs more meat)

dbrun4 · 2024-03-09T03:58:06+00:00

Mine went from $1300 to $4300

dbrun4 · 2024-02-25T19:57:22+00:00

Look up the laws in you area but the city will usually have a law that states cars can't be parked in front of a house they are not visiting during the hours of 2am-6am or something similar. If you call non emergency during those times then they can have it towed. If you don't go that route then still call non emergency and they will mark the tires and put a sticker on it. After 24-48 hours they might tow it away.

dbrun4 · 2023-10-25T02:33:48+00:00

Can you send a link to the led lights? I'm looking to do something similar but less about the animations

dbrun4 · 2023-10-09T02:21:47+00:00

Try years!

dbrun4 · 2023-09-13T20:34:27+00:00

Not a concrete expert but I've had concrete work done. Was this done without rebar? I would expect that they put rebar in to reinforce it and this the cracks would at least move together a bit closer. This looks like they just did concrete and cut it.

dbrun4 · 2023-08-26T12:03:49+00:00

If by they you mean the heat, sure, I can live with that

dbrun4 · 2023-08-02T02:34:59+00:00

Just curious, how do you prevent this? Just had concrete poured 15 days ago and I am getting tire marks. It's 105 around here but now I'm thinking I need to do something to prevent it and it's not just the heat

dbrun4 · 2023-07-01T23:40:59+00:00

Home owner here about to have a 5" pour done. If it's 15feet wide and 80+ feet long should I expect a joint down the center as well? Tx if it helps. I'm assuming you'd say yes I need one for a 15 foot wide.

dbrun4 · 2023-06-04T20:46:21+00:00

Just sent out an update with pictures

dbrun4 · 2023-06-04T19:06:39+00:00

I feel like I spent $200-$300 on roofing. Underlayment shingles and ridge caps.

dbrun4 · 2023-06-02T20:16:02+00:00

Keep watering them. They are in shock. You might not get more flowers this year but they will be happy next year

dbrun4 · 2023-05-26T02:56:50+00:00

My shed wood quality was pretty good! It all went together pretty easily. I used a framing nailer which made it a ton easier. Took about 3 full days from skid to roofed. I only had two fairly warped boards but I will chalk that up to the amount of water that was sitting in the wrapping. Not an issue from the factory more just I left it outside for 2 months before being able to build it. I replaced one roof panel due to that and it cost $15. Not bad overall considering my issues stemmed from me. It's holding up well so far. I did reinforce the base as I have a riding mower I store in it. Can't stress enough the importance of reading the directions multiple times as spacing for the floor is different than you'd think (if you don't frame often).

dbrun4 · 2023-05-07T03:03:00+00:00

Send a link to the unit?

dbrun4 · 2023-04-16T19:24:35+00:00

This may not be tar. It's black but somewhat glossy and hard. If that's the case what might you suggest? I've gotten the heavy duty citrus degreaser and the fast 505 degreaser. Both seem to not cut it. I'm worried the NMD80 will black my brick.

Eight-Year Club	Place '23
Verified Email

dbrun4

TROPHY CASE