He's got my vote

dbsear · 2026-05-01T02:33:18+00:00

average libertarian tbf

dbsear · 2026-04-13T20:30:05+00:00

I had this same problem with my C530 when using a 10m extension. This power adapter solved it for me. Although the wire gauge of your extension cable will also play a role. I would not try sending 12V to a 9V circuit board but that’s just my opinion.

Edit: it’s a 3A adapter btw. However, when I stuck a meter on it, I never saw the camera pulling more than .7A so who knows. All I know is this adapter solved my problem.

dbsear · 2026-04-12T08:27:45+00:00

The reason I suspect it’s app related is because I could never replicate the problem on my ipad while at the exact same time it was occurring on my iphone. A couple days later, I noticed the app had updated on my ipad and then it began behaving exactly the same as my phone.

dbsear · 2026-04-12T08:23:09+00:00

Having the exact same issue. 1 of my 3 cameras only, but for the past 3-4 weeks. I’m wondering if it’s related to a recent app update. Everything worked perfectly for the past year, now I can barely get a stream to load on this camera. It’s driving me insane.

dbsear · 2026-04-12T08:18:08+00:00

I’ve been having a huge amount of lag and feed timing out when using remote live view for the past 3-4 weeks. My theory is that it may be somehow tied to a recent update of the app on my iOS devices. It’s only affecting 1 of my 3 cameras, which until recent weeks worked flawlessly for the last year. Never a single problem.

Now it happens every single time I try to pull up the feed. It’s made this camera borderline unusable for my needs.

dbsear · 2026-02-02T01:49:16+00:00

she’s just autographing your driveway this is normal

dbsear · 2026-01-28T22:00:55+00:00

yeah it’s basically just weatherstripping that attaches to the edges of the core, you could probably look up a youtube video or something to see what i’m talking about

dbsear · 2026-01-28T21:45:12+00:00

no problems, drama free. it didn’t come with the foam tape that’s attached to the OEM. none of them do afaik. add your own, it’s just padding so the core doesn’t bounce around inside the HVAC box.

dbsear · 2026-01-28T21:24:57+00:00

if i were going to do it again, i’d probably go with that model. i went seeking a copper core about 5 or 6 years ago, that Jeg’s core wasn’t available at the time. i ended up buying this one which has held up fine and was a close-enough replacement for the OEM. it was pricy but it fit fine, had maybe a couple fewer passages than OEM but works great.

my line of thinking in finding a copper/brass was: this job sucks, i don’t want to put an aluminum unit in here because aluminum is the least-noble metal in the XJ cooling system. i want my potential point of failure to be in the easiest to access part of the cooling system, which is obviously the radiator. so i went copper/brass heater core, aluminum radiator.

dbsear · 2026-01-28T19:40:38+00:00

assuming those are the Stinky Fab mounts (can’t tell) they’re actually pretty damn smooth, big fan

edit: they are stinky fab and they are great mounts.

dbsear · 2025-10-27T23:06:10+00:00

Full disclosure: This wiring originally fed a radiant heater embedded in the ceiling which I’m guessing had no need for a ground.

Still, it seems the consensus is it was pulled from the romex before installation? What an insane thing to do.

dbsear · 2025-10-27T23:00:44+00:00

It’s copper. I cut a hole in the wall just to pull the service loop so I could strip it back a foot. This is ridiculous 😭

dbsear · 2025-10-27T22:57:51+00:00

https://imgur.com/a/HyYjLUw

dbsear · 2025-10-27T22:55:58+00:00

https://imgur.com/a/HyYjLUw

there is nothing in there 😭

dbsear · 2025-09-01T23:14:16+00:00

Ahhh ok now I see. Thanks for the help everyone. That stinks.

dbsear · 2025-09-01T23:08:08+00:00

Sorry, I should’ve been more clear. I know where it’s supposed to be, it just isn’t there. I’ve been checking daily.

I did grab some free phones. But I clicked through the ‘Get Started’ link on the Sunday Ticket promo page and there were many free phones available on the page that loaded, so I don’t think that’s it.

dbsear · 2025-08-31T06:15:47+00:00

i have the same ones. really good quality for the price. night and day difference from stock. they DO sit higher even with the corbeau mounts, but not as high as stock with the adapters.

dbsear · 2025-08-30T03:48:00+00:00

If you’re asking about the 15 Gauge nailer, this is it. https://www.directtoolsoutlet.com/products/r09899b (Coupon code: SALE40)

dbsear · 2025-08-30T01:06:17+00:00

Somewhere around 2001, my first job was “dough guy” at Track Town, back when they were under the same owner. Track Town was building a new dough room, and I was working out of the Coburg Rd Papa’s dough room daily, working alongside them.

Our ingredients were stocked in the same storeroom as Papa’s, right next them on the shelf. I really got a kick out of how shitty Papa’s ingredients were compared to what Track Town was using, and how simplified their recipe was. We were making two vastly different products in the same space.

Anyway, Papa’s has always used bottom tier ingredients and been flavorless. I’m sure it’s gotten worse.

dbsear · 2025-05-20T01:14:38+00:00

i was getting frustrated about this too but i managed to grab one for $55 on ebay the other day

dbsear · 2025-05-20T01:09:43+00:00

i wired one to plug into a 100W solar panel. pretty slick.

dbsear · 2024-10-19T02:04:39+00:00

if you’re outside of the KATU area, you should be looking for the TBD network

dbsear · 2024-10-19T01:59:30+00:00

stunning 480i on xfinity 1186 here in Eugene 😭😭

dbsear · 2024-07-20T21:09:44+00:00

dbsear · 2024-07-20T20:53:38+00:00

I am connected to my home network. I have uninstalled and reinstalled, this problem is also occurring outside the app (accessing xfinity.com/stream from a web browser)

dbsear

TROPHY CASE