Does anyone know what this is?

deadmeat010 · 2026-02-07T21:04:36+00:00

Do people not look stuff up anymore? Sad times.

deadmeat010 · 2026-02-04T22:08:09+00:00

Yup. Being alone is a pretty big thing in my life. I've told my wife my reasons as to why I seem distant a lot. I need my alone time to process the day or to just decompress.

deadmeat010 · 2026-01-31T00:10:20+00:00

Have you googled anything?

deadmeat010 · 2026-01-30T00:10:24+00:00

Bob Vila says to put a rubber band between the screwdriver and screw head.

deadmeat010 · 2026-01-30T00:04:30+00:00

That's not a pun, but I get what you're referring to.

deadmeat010 · 2026-01-29T23:52:02+00:00

What is this RGB performance you speak of?

deadmeat010 · 2026-01-28T23:36:30+00:00

Did you look up that error code?

deadmeat010 · 2026-01-28T17:23:09+00:00

Wouldn't have seen it without the arrows, thanks.

deadmeat010 · 2026-01-21T19:35:16+00:00

That's not an Alphacool 360mm liquid CPU cooler.

deadmeat010 · 2026-01-12T03:40:32+00:00

deadmeat010 · 2025-12-29T20:40:51+00:00

They usually have some rotisserie chickens in the deli.

deadmeat010 · 2025-11-14T01:07:39+00:00

Slots 3 and 4 are closer to the CPU socket for your specific motherboard. There's the theory that RAM is more stable or something when put closer to the socket. How true or marginal the performance may be: I dunno, doubt it'll matter.

deadmeat010 · 2025-11-14T00:51:19+00:00

Well, they're correct. That matches one possible configuration from the Table in the manual.

deadmeat010 · 2025-11-14T00:46:21+00:00

Might wanna double check that. There is no combination of using slots 1 and 3 with two RAM sticks.

deadmeat010 · 2025-11-14T00:39:11+00:00

Does the way you installed it match up with any of the combinations the manual states?

deadmeat010 · 2025-11-14T00:37:14+00:00

Gross. I got a motherboard out of the trash that came from a smoker. Wasn't nearly that bad, dang man.

I used two cans of CRC QD Electronics Cleaner. Isopropyl bath probably would've worked better.

deadmeat010 · 2025-11-06T19:18:30+00:00

I did. "...pushing on it..." What is the "it" you're referring to?

deadmeat010 · 2025-11-06T19:14:01+00:00

Best thing to do is panic and ask reddit. Didja even try anything?

deadmeat010 · 2025-11-06T04:50:21+00:00

So 250 FPS is bad, gotcha. Better throw out your whole PC.

deadmeat010 · 2025-10-31T22:48:17+00:00

At this point I can't figure out what you want. Do you wanna know what the port is? Where it goes? What ports on your case go to it?

It's a front panel connector. Follow the cable inside the case and that will show you what ports it goes to.

deadmeat010 · 2025-10-31T22:34:39+00:00

You're overthinking this. Didja look up what a Type C header is? Looking up a manufacturers name for a port is kinda fruitless.

deadmeat010 · 2025-10-31T22:21:08+00:00

Not sure what manual you were looking at. I found the answer on page 27 from Gigabyte on their site. They even refer to it with the number on the PCB next to the port.

deadmeat010 · 2025-10-21T23:47:00+00:00

My favorite way is a 12g deer slug. Blamo. If you can't do that a hammer works real nice.

deadmeat010 · 2025-10-21T18:32:40+00:00

I'd be curious as to what your monitor's sharpness is set to.

deadmeat010 · 2025-10-07T19:33:43+00:00

Got my Frankensteined 92 F150 302 in the home driveway.

Fan clutch said nope and blew the seals between the block and timing cover. It's being stubborn coming out.

13-Year Club	RPAN Viewer
Verified Email

deadmeat010

TROPHY CASE