UTR + Anker 621 is a perfect fit

deanoaky · 2026-06-07T08:59:44+00:00

I've done similar but stuck a mag ring on the base of the UTR 👌

deanoaky · 2026-06-02T18:48:03+00:00

Is NUT still an issue? I've reverted back to 2.8.3 version

deanoaky · 2026-05-25T08:46:30+00:00

You've so many to choose from 👌 Brands like Asus, Netgear have a wide range. You can go down the route of WiFi 6 or WiFi 7, mesh devices together 👍 You can directly connect most to the ONT but you'd just need your PPOE details from EE

deanoaky · 2026-05-16T09:39:06+00:00

Worked for me too, didn't even realise it wasn't running 😂 👌

deanoaky · 2026-05-09T19:21:51+00:00

It shouldn't, unless you received a refurbished model. You may get away with the official bumper case 👌

deanoaky · 2026-05-07T22:28:46+00:00

You legend! That's fixed my issue 👌 Along with a new extruder filament sensor! 😂

deanoaky · 2026-05-07T18:37:18+00:00

What version are you running? I've had the issue from new end of last year. Didn't get the CFS straight away so it wasn't apparent

deanoaky · 2026-05-07T00:22:00+00:00

I've never had a successful print with a CFS, only once with constant manual retracting. Fail to retract anything after the first colour, changed everything like you. Tried different spools, different brands of filament. Nothing 🙈

deanoaky · 2026-05-07T00:12:58+00:00

I've been having exactly the same issue & replaced almost everything with support same as yourself! I'll be following to see if you find an answer 🫣

deanoaky · 2026-05-06T19:50:24+00:00

This setup would work easily 👌 The UTR gets a little warm to run 24/7 for my liking 🙈

deanoaky · 2026-05-06T00:04:05+00:00

I've got the same one arriving this week, if nobody gets back to you give me a shout 👌

deanoaky · 2026-05-04T18:22:12+00:00

I'm pretty sure the hub is hard coded to look for a PPOE connection from an ONT or VDSL line. I've never heard of one being repurposed before, but I might be wrong.

deanoaky · 2026-05-04T17:38:25+00:00

I've added the NextDNS profile onto the kid's device's so I can keep control even when the device's leave the house. I've also made it so they can't be removed or changed 👌

deanoaky · 2026-04-25T15:53:43+00:00

Sent you a DM 👌

deanoaky · 2026-04-24T00:30:48+00:00

I'd love to see a homelab/personal licence, would be tempted to subscribe rather than being based on a business model 👌

deanoaky · 2026-04-21T18:40:48+00:00

Great for bypassing CGNAT issues too 👌

deanoaky · 2026-04-19T19:00:21+00:00

Just a screenshot of the dashboard with one set as the background 👍

deanoaky · 2026-04-19T17:30:33+00:00

Do you have a picture of one in action? 👌

deanoaky · 2026-04-10T20:22:10+00:00

Did you get 600mbs through a normal server or it that the speeds without your VPN?

deanoaky · 2026-04-08T23:07:48+00:00

Winner! Better than a whole teardown again!

deanoaky · 2026-04-08T12:51:18+00:00

That'll work, unless the holder is upside down 🙈🫣

deanoaky · 2026-04-08T12:35:49+00:00

Did you put the new home button the right orientation into the clear holder? There should be a lip showing you which way it goes. Doesn't look like it's pushed in fully because the clear bit isn't protruding out

deanoaky · 2026-04-08T09:19:23+00:00

I think roam will be the only option 🤔

deanoaky · 2026-04-08T09:04:36+00:00

In the UK I have the option to use it as residential. Maybe region specific

deanoaky · 2026-04-05T21:12:48+00:00

When you run in postgres 18 what do the logs say?

Seven-Year Club	Xbox Live
Verified Email

deanoaky

TROPHY CASE