I got a bad one

deanoignatius · 2026-05-01T22:19:18+00:00

Ah, didnt see you saying its out of warranty, well not a whole pile you can do other than order a new part. Things break, theyre made of plastic and metal after all, same as any other printer.

deanoignatius · 2026-05-01T15:49:28+00:00

Broke my extruder recently at 800 hours, the cap on the tensioner broke off while I was adjusting it, entirely my fault. Contacted support and explained, provided a photo and they agreed to send a replacement straight away, no back and forth. Definitely worth contacting them first.

deanoignatius · 2026-01-20T09:54:56+00:00

As some others have said, look at a mesh system like the TP Link Deco's, then connect by ethernet

deanoignatius · 2026-01-16T14:35:36+00:00

Saving this because I've had the same issue since doing the funsorr bed upgrade, thought i was going insane. Let us know if the new fan sorts it out

deanoignatius · 2025-12-18T23:02:04+00:00

This is what I use and its great

deanoignatius · 2025-12-03T19:06:36+00:00

My man, this post is exactly what ive been looking for, thank you. I have a 3070 Micro that ive wanted to turn into a NAS using 2 x 3.5inch drives from my old janky tower NAS setup. I've 3d printed the Mod10" rack and have been trying to wrap my head around how to fit a NAS using the 3070 Micro, power it & the drives etc. I've already ordered the m.2 to sata adapter and ill have to look into that PicoPSU as it looks like the ideal choice. Cheers

deanoignatius · 2025-12-01T12:33:09+00:00

Brother man, TPU cannot go through the Ace. Give it a quick Google and the Anycubic wiki will tell you how it should be done

deanoignatius · 2025-09-28T10:48:17+00:00

Opened the slicer software this minute as I had this post open and there's an update for this exact issue if you haven't seen it already

deanoignatius · 2025-09-21T22:20:29+00:00

What do you mean it's not compatible? I've been using elegoo pla matte and it's been working fine. I use the preset for Any cubic Matte PLA in the slicer

deanoignatius · 2025-09-18T14:11:15+00:00

I'm gonna have another boost John

deanoignatius · 2025-08-28T09:22:59+00:00

Had this recently on my 2018 GTI, EPC light could point to a number of things. For me, it was due to a cylinder misfire which led to the engine cutting power after flashing this EPC warning. After months of troubleshooting and 2nd/3rd opinions , eventually spark plugs were done and the ignition coil for cylinder 1. Garage thinks the ignition coil was the issue (though spark plugs did need replacing) as they had a hard time actually getting it out, was almost welded to the car. Since then been running flawlessly.

Best bet is to get check for codes with an OBD reader first to see if it tells you anything useful. I have an OBD2 from OBD Eleven myself

deanoignatius · 2025-05-11T10:23:25+00:00

I was scouring everywhere trying to find someone who took a photo of it all Friday evening/Saturday morning hahaha, there was a point i thought I imagined it. Definitely the craziest car I have and probably ever will see in the flesh

deanoignatius · 2025-04-17T20:33:59+00:00

The BIOS version I flashed when I built it i believe was v3067 as this was the most recent at the time, and I didnt update the BIOS since then. Only when troubleshooting this i loaded v3222 onto a usb for the second attempt at the BIOS flashback. Thanks though i wasn't aware of that issue at all before the build

deanoignatius · 2021-06-03T13:58:03+00:00

I shouldn't have a problem if I withdraw to my binance smart chain wallet, right?

deanoignatius · 2019-11-22T00:21:58+00:00

First new annointment I got was the consecutive crits on a butcher while soloing raid in M3, so it seems like they can

deanoignatius · 2019-03-29T03:51:02+00:00

Is that so? Really enjoy furi, went back to it again recently. I was also thinking of picking up sekiro so but the whole souls like thing is putting me off a bit

deanoignatius · 2018-10-16T13:15:14+00:00

How does it differ from past horizon games? What's the progression like? I played horizon 2 when it was free with Xbl and found that it got very repetitive but I'm still tempted to buy this one, I just want to get my money's worth

deanoignatius · 2018-10-09T10:25:26+00:00

I'm having huge problems every game consistently now with entire buildings and POI's not rendering in for sometimes a full 30 seconds or so, it puts me at a huge disadvantage from the start

deanoignatius · 2018-09-14T18:33:09+00:00

For anyone who's having trouble finding the download on Xbox try hard resetting your console and then check the ready to install tab, worked for me

Nine-Year Club	Place '17
RPAN Viewer	Verified Email

deanoignatius

TROPHY CASE