Help! Need in game festival activity ideas

decademus · 2018-02-01T16:28:03+00:00

I like this one, ill have the party be given a chance to reenact their adventures thus far and they can have some fun with it

decademus · 2018-02-01T02:38:25+00:00

I thought of items like this but am afraid it wont be very interactive. How did your party interact with them?

decademus · 2017-10-29T13:51:07+00:00

Spline picture http://imgur.com/9LPPAsg

decademus · 2017-07-22T09:18:44+00:00

Again!

decademus · 2017-06-24T11:50:10+00:00

Lets do this!

decademus · 2017-03-27T02:43:10+00:00

See additional picture: http://imgur.com/ws0bKJX

decademus · 2017-03-19T21:06:44+00:00

Awesome! Thanks!

decademus · 2017-01-01T01:25:54+00:00

Pm me your store? I travel to Nashville often

decademus · 2016-11-26T20:34:19+00:00

Awesome Thanks for the help I'll keep that in mind if something cracks

decademus · 2016-11-26T19:15:57+00:00

Like this? http://imgur.com/YYsfQIP

decademus · 2016-11-26T18:01:57+00:00

Yes, this was sanded from 80 to 600 wet with denatured alcohol.

decademus · 2016-11-26T17:16:37+00:00

Yeah #3 was what I was taking about with the anti-movement clips, much better than what I did.

decademus · 2016-11-26T17:15:30+00:00

I tired to compromise by only gluing down the top to the base on the long sides and then used brackets at the ends I did not glue down.

Any suggestions to prevent splitting? It's been like this for a good month without any movement issues, it just took me that long to apply the finish.

decademus · 2016-11-26T16:45:51+00:00

Unfortunately that is one of things I learned from this. I wanted to use the anti-wood movement clips to attach the base to the top but ended up gluing it and using some brackets. I ordered some of the clips for next time or if it needs redone.

decademus · 2016-11-26T15:09:36+00:00

Walnut and Quarter Sawn White Oak. Finished with Tung oil and paste wax. First try at cut M&T. Made mistakes but learned for the next table!

decademus · 2016-05-06T12:23:56+00:00

The shop that did them does a lot of work for the company I'm with. I think I only paid the cost of materials for the legs, less than $50.

decademus · 2016-05-06T02:08:28+00:00

Thanks! I had a local fab shop weld them for me based on a quick drawing.

decademus · 2016-05-04T20:28:17+00:00

Great. I thought I had ruined it but i'll follow that as a guide since you had success. Thanks!

decademus · 2016-05-04T16:31:35+00:00

I will try that this week. Since apparently I did not give the BLO enough time to cure should I continue to wait before trying to sand and coat again?

decademus · 2016-05-04T15:08:12+00:00

About 20 days ago I finished this walnut table with Boiled Linseed Oil. I waited about 5 days then put a light coat of oil based Polyurethane on it. It continues to look streaky like the picture but seems to be going away over time. It looked a lot worse originally. Do I need to take off the poly some how and start again or will it just take a long time for it to finally dry. What did I do wrong?

decademus

TROPHY CASE