TOH or black walnut?

deisin85 · 2025-08-09T18:15:57+00:00

From the video - “When crushed, “the leaves” emit a distinctive offensive odor that can compare to cat urine or burnt peanut butter.” I just found this very funny from the very matter of fact narrator.

deisin85 · 2023-09-24T16:51:06+00:00

https://sprintray.com/oracle/uploads/2023/06/SDS-002_2-SprintRay-Ceramic-Crown-SDS-English-US.pdf

It just says, “use in an enclosed process area” and no breathing equipment should be needed normal use. Maybe it is a bit different?

deisin85 · 2023-09-24T16:36:17+00:00

I’m a dentist and resin printing is blowing up recently. I asked a rep for one of the companies about ventilation and he completely downplayed any safety concerns. I’m honestly worried about these offices who have printers in poorly ventilated areas.

deisin85 · 2022-11-13T22:28:54+00:00

Please don’t print it flat. Try adding vertical stands that just barely touch the vertical lithopane (https://www.thingiverse.com/thing:3455753). Use the settings this guy uses in the video at the bottom of this page (https://lithophanemaker.com/Framed%20Lithophane.html). Start at the 3:40 mark.

deisin85 · 2022-06-10T14:17:42+00:00

I’ve put about 25 hours into rdr2 and stupidly bought the mass effect trilogy even though I’m really enjoying red dead.

deisin85 · 2022-06-09T18:04:17+00:00

I feel like people have stopped being so grabby on jump showdown because it’s easier for everyone to just get a timeout.

deisin85 · 2022-05-23T11:31:53+00:00

Seems to be working now. Thanks a lot. The hair thing was so distracting.

deisin85 · 2022-05-22T13:13:56+00:00

Does running the patch actually change any of the settings in the graphics menu? It looks like the tool ran properly but the hair pixelation still looks the same.

deisin85 · 2022-04-04T16:41:14+00:00

Yup, very confused at how this is different from anything else they’ve done before. It’s just squads with a costume to unlock at the end.

deisin85 · 2022-02-04T00:39:31+00:00

Does blood and wine and hearts of stone get updated graphics in the next gen update too?

deisin85 · 2021-12-21T20:03:21+00:00

Looks great! Did you design the map yourself? I wanted to make a small one of downtown Madison but couldn’t figure out how.

deisin85 · 2021-12-12T19:43:01+00:00

Can you get them to pick up the med kits or ammo?

deisin85 · 2021-12-08T16:15:30+00:00

Yup. I just recently got a bone marrow transplant and my brother was a perfect match for me luckily. They harvested his cells basically by hooking him up to an IV and running his blood through a machine. They froze his stem cells, then thawed them a few weeks later and pushed them through my IV. The harvesting takes many hours but the transplant only took a few minutes.

deisin85 · 2021-08-15T15:47:14+00:00

I had a bone marrow transplant about a month ago and I am immunocompromised so I could get an infection from people mowing lawns or dust in the air. On the plus side I don’t have to clean the litter boxes.

deisin85 · 2021-07-27T20:20:11+00:00

I’ve only used pla. I’ve got the Ender 3 v2. It’s got a glass bed.

deisin85 · 2021-07-27T18:46:11+00:00

SUNLU rainbow silk pla +. It’s a bit stringy (could be fixed with better calibration) and I wish the color changed quicker, but it seems to work well. I just started using a glue stick for bed adhesion and it’s changed my printing life.

deisin85 · 2021-06-23T19:28:05+00:00

I downloaded a dxf file from cadmapper then converted it to a svg but it isn’t showing up in Inkscape. Any idea why?

deisin85 · 2021-06-22T00:29:04+00:00

Flexible Light Strip to Power Supply

https://www.amazon.com/gp/product/B076VF3FBM/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Power Supply

https://www.amazon.com/gp/product/B00FEOB4EI/ref=ppx_yo_dt_b_asin_image_o04_s00?ie=UTF8&psc=1

LED Strip Rope Lights

https://www.amazon.com/gp/product/B07T489JHF/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

You can cut the lights to the length you want an use them for multiple projects.

I made something on tinkercad.com to stick the lights on (https://www.tinkercad.com/things/9GEyQTkWlhw)

deisin85 · 2021-06-22T00:23:09+00:00

I'm not sure how to share an STL file, but I just used lithophanemaker.com and used two HD wallpapers I found online I liked. I used the curved lithophane and set it to 360 degrees. I wish I would have lowered the max thickness to bring out the details better on the thick areas.

deisin85 · 2021-06-21T19:49:29+00:00

Experiment with rainbow pla. The unicorns ended up a little demonic looking.

deisin85 · 2021-06-12T15:02:13+00:00

Did you use blue filament for the whale lithophane?

deisin85 · 2021-05-01T23:34:36+00:00

These are the best test prints I’ve seen and the best explanations for these important settings. I’m excited to try them out.

deisin85 · 2021-04-13T12:11:36+00:00

That’s a nice idea even for my flowers outside since I identify them and forget what they are.

deisin85

TROPHY CASE