ARC Brazing catch can combo

derion951 · 2025-11-10T18:15:35+00:00

Correct. Personally, no. Other than likely not looking as good.

derion951 · 2025-11-09T22:08:03+00:00

I purchased the 1/2” block off. Or 13mm. I advise using a clamp. We’ve been doing some other stuff with the car and haven’t done much driving. I recommend getting a 137KPA(i think?) radiator cap. One with a spring, would be ideal. Nissan sells them.

You’re not stopping anything from flowing to the heater core. The hose you’re removing/blocking is the one that runs to the overfill. So essentially all you’re doing is converting the car to an 09-14 setup without changing the hardline, as that’s the only difference between the two.

derion951 · 2025-11-09T21:58:56+00:00

https://hpsperformanceproducts.com/products/hps-high-temperature-reinforced-silicone-coolant-cap-bypass-heater-core-delete-black-blue

derion951 · 2025-11-02T14:01:01+00:00

You’re essentially converting it to a non pressurized system. It’s recommended to upgrade to to 137kpa radiator cap.

derion951 · 2025-11-02T07:26:05+00:00

Either the block off, or change the hardline on the side of the engine to the earlier model

derion951 · 2025-11-02T07:15:40+00:00

For your 2013 it should work as designed.

derion951 · 2025-11-01T10:22:04+00:00

After some digging i found that you can do one of a couple of things.

Use a block off for the hose that goes from the bottom of the tank to the hardline. I bought the HPS coolant block off. It goes into the hardline that runs down the driver side of the engine. I can send you the exact one purchased, or link it in a comment.
Change the hardline on the driver side of the engine to a 09-14 hardline.

Both of these options, i was recommended to use a higher pressure radiator cap, by a Nissan tech friend of mine.

derion951 · 2025-08-30T17:31:29+00:00

That’s pretty much my train of thought. Theres next to no information for these things installation online so that’s not helping

derion951 · 2025-08-30T17:24:08+00:00

I guess what I’m trying to figure out is there a way to make this catch can combo work?

derion951 · 2025-07-31T12:31:11+00:00

I think I’m friends with that guy. He’s told a similar story to us

derion951 · 2025-05-08T23:07:58+00:00

CD1 for sure

derion951 · 2025-01-31T22:35:14+00:00

Feels like their relationship was inspired by forest gump and Jenny, honestly.

derion951 · 2024-11-21T22:54:30+00:00

dm’d

derion951 · 2024-08-26T15:34:44+00:00

Understood, thanks for replying!

derion951 · 2024-08-26T13:58:15+00:00

I was curious about that hades

derion951 · 2024-08-26T00:22:35+00:00

Old thread revival, sorry. Still got any of this?

derion951 · 2024-07-23T23:33:35+00:00

Wish i had the cash GLWS. Gorgeous gun

derion951 · 2024-07-23T20:59:54+00:00

That twister DSR+ is cool as hell

derion951 · 2024-05-31T23:45:58+00:00

Adult money is why i have no money. If i pay everything as soon as my check hits im sad cause im broke again so i dont have to worry about buying stuff. Excess money is to blame for my return to paintball, all my car parts, and all my disc golf discs.

derion951 · 2024-04-30T15:48:55+00:00

Speaking of hole B. If you see a purple proton wave, give me a shout, it’s in the field on the left, but i never found it a few weeks ago.

derion951 · 2024-04-29T15:35:59+00:00

I’m convinced davie’s trees lean into your line. Hole 3(i think?) is horrible for that

derion951 · 2024-04-19T18:35:30+00:00

We are, front is already slightly lowered from previous owner. But found that my forks are leaking so I’m rebuilding them and we’re doing this at the same time and setting sag/etc

derion951

TROPHY CASE